Publications

Applications of Voltage-Based Power Control using Online Load Sensitivity Calculation
Courcelle, M.; Tao, Q.; De Carne, G.
2024. 2024 IEEE Power & Energy Society General Meeting (PESGM), 1–5, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/PESGM51994.2024.10688776

Load Sensitivity-Based Demand Control: Impact on Load Forecast Error Reduction
Tao, Q.; De Carne, G.
2024, June 18. 14th Annual Protection, Automation and Control World Conference : PAC World Conference (PACWC 2024), Athens, Greece, June 17–21, 2024

Time-Varying Voltage Sensitivity of Residential Loads for Voltage-Led Power Control Applications
Tao, Q.; Courcelle, M.; De Carne, G.
2024, July 23. IEEE Power and Energy Society General Meeting Student Poster Session (IEEE PES GM 2024), Seattle, WA, USA, July 21–25, 2024

QiucenTao/Voltage-sensitivity-of-residential-loads: Voltage Sensitivity-Release v2.0.0
Tao, Q.
2024, March 12. doi:10.5281/zenodo.10809111.

Experimental Investigation of Power-to-Voltage Sensitivity Profiles of Residential Loads for Load Management Studies
Tao, Q.; Courcelle, M.; Geis-Schroer, J.; Leibfried, T.; Carne, G. D.
2024. IEEE Transactions on Power Delivery, 1–12. doi:10.1109/TPWRD.2024.3457578

Perturbation-Based Load Sensitivity Identification for Solid-State Transformer-Based Load Control
Courcelle, M.; Tao, Q.; Geis-Schroer, J.; Leibfried, T.; De Carne, G.
2024. IEEE Transactions on Power Delivery, 1–12. doi:10.1109/TPWRD.2024.3453270

The role of energy storage systems for a secure energy supply: A comprehensive review of system needs and technology solutions
De Carne, G.; Maroufi, S. M.; Beiranvand, H.; De Angelis, V.; D’Arco, S.; et al.
2024. Electric Power Systems Research, 236, Art.-Nr.: 110963. doi:10.1016/j.epsr.2024.110963

Power-to-Frequency Dependency of Residential Loads in a Wider Frequency Range: An Experimental Investigation
Geis-Schroer, J.; Tao, Q.; Courcelle, M.; Bock, G.; Suriyah, M.; et al.
2024. IEEE Transactions on Industry Applications, 60 (6), 9184–9194. doi:10.1109/TIA.2024.3439498

Performance Analysis of ASR-UKFs for Supercapacitor SoC Estimation in Hybrid Energy Storage Systems
Fusco, D.; Maroufi, S. M.; Porpora, F.; Monaco, M. D.; Carne, G. D.; et al.
2024. IEEE Journal of Emerging and Selected Topics in Power Electronics, 1. doi:10.1109/JESTPE.2024.3443276

Investigating the Impact of Sensor Placement on the Stability of Power Hardware-in-the-Loop with a Grid-Following Inverter as Hardware-of-Interest
Ashrafidehkordi, F.; Carne, G. De
2024. 2024 IEEE 10th International Power Electronics and Motion Control Conference (IPEMC2024-ECCE Asia), Chengdu, China, 17-20 May 2024, 4611–4616, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/IPEMC-ECCEAsia60879.2024.10567418

A Smart Transformer for the Electrical Power System of Green Airports: Smart Power Management
Buticchi, G.; Pereira, T.; Yang, J.; Carne, G. De; Gao, X.; et al.
2024. IEEE Industrial Electronics Magazine, 18 (3), 6–16. doi:10.1109/MIE.2023.3304065

A Comprehensive Review on DC Fast Charging Stations for Electric Vehicles: Standards, Power Conversion Technologies, Architectures, Energy Management, and Cybersecurity
Arena, G.; Chub, A.; Lukianov, M.; Strzelecki, R.; Vinnikov, D.; et al.
2024. IEEE Open Journal of Power Electronics, 5, 1573–1611. doi:10.1109/OJPEL.2024.3466936

Modellierung und Design einer quecksilbergetriebenen Vakuumpumpe zum Pumpen der Abgase eines Fusionskraftwerks = Modeling and Design of a Mercury-driven Vacuum Pump for Fusion Power Plant Exhaust Pumping. PhD dissertation
Teichmann, T.
2024, November 5. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000175884

Numerical simulation of neutral gas dynamics in the W7-X sub-divertor
W7-X Team; Varoutis, S.; Tantos, C.; Strobel, H.; Day, C.; et al.
2024. Nuclear Fusion, 64 (7), 076011. doi:10.1088/1741-4326/ad49b5

Proposal of a control scheme for testing a centrifuge-based pellet injection system in DIPAK-PET
ASDEX Upgrade Team; Ploeckl, B.; Lang, P. T.; Giegerich, T.; Geulin, E.; et al.
2024. Fusion Engineering and Design, 199, Article no: 114142. doi:10.1016/j.fusengdes.2023.114142

3D numerical study of neutral gas dynamics in the DTT particle exhaust using the DSMC method
Tantos, C.; Varoutis, S.; Hauer, V.; Day, C.; Innocente, P.
2024. Nuclear Fusion, 64 (1), Art.-Nr.: 016019. doi:10.1088/1741-4326/ad0c80

Study of the Effective Torus Exhaust High Vacuum Pumping System Performance in the Inner Tritium Plant Loop of EU-DEMO
Teichmann, T.; Luo, X.; Giegerich, T.; Day, C.
2024. Fusion Science and Technology, 80 (3-4), 399–410. doi:10.1080/15361055.2023.2229679

High voltage testing of insulators for a medium voltage liquid nitrogen insulated line
Fink, S.; Zwecker, V.; Müller, R.; Nickel, D.
2024. IEEE International Conference on High Voltage Engineering and Applications (ICHVE 2024), 4 S., Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/ICHVE61955.2024.10676219

Lichtabsorption und photovoltaischer Effekt in ferroelektrischem Bismutferrit. PhD dissertation
Petrick, S.
2024, February 1. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000167924

Design, fabrication and test of high temperature superconducting magnet for heat flux and radio blackout mitigation experiments in plasma wind tunnels
Schlachter, S. I.; Drechsler, A.; Gehring, R.; Eisele, M.; Gretschmann, F.; et al.
2024. IOP Conference Series: Materials Science and Engineering, 1302 (1), Article no: 012021. doi:10.1088/1757-899X/1302/1/012021

Fabrication and Powering Test of a High-Temperature Superconducting Periodic Quadrupole Driving a Short-Length Transport Line for Laser-Plasma Accelerators
Fatehi, S.; Bernhard, A.; Richter, S. C.; Grau, A.; Eisele, M.; et al.
2024. IEEE Transactions on Applied Superconductivity, 34 (3), Art.-Nr.: 4001905. doi:10.1109/TASC.2024.3351958

HTS Undulator Design Study and First Results
Krasch, B.; Abusaif, F.; Arndt, T.; Glamann, N.; Grau, A.; et al.
2024. arxiv

Overview of ASDEX upgrade results in view of ITER and DEMO
EUROfusion Tokamak Exploitation Team; ASDEX Upgrade Team; Zohm, H.; Alessi, E.; Angioni, C.; et al.
2024. Nuclear Fusion, 64 (11), Art.-Nr.: 112001. doi:10.1088/1741-4326/ad249d

Electromagnetic-thermal modeling of high-temperature superconducting coils with homogenized method and different formulations: a benchmark
Dadhich, A.; Grilli, F.; Denis, L.; Vanderheyden, B.; Geuzaine, C.; et al.
2024. Superconductor Science and Technology, 37 (12), 125006. doi:10.1088/1361-6668/ad8315

High Voltage Calculations for a 380 kV Superconducting Fault Current Limiter
Fink, S.; Noe, M.
2024. IEEE transactions on applied superconductivity, 34 (3), Art.-Nr.: 5600705. doi:10.1109/TASC.2023.3349364

Compact HTS Motor Designs Especially Useful to Be Cooled by Liquid Hydrogen
de Oliveira, R. A. H.; Taalibi, O.; Arndt, T.
2024. IEEE transactions on applied superconductivity, 34 (6), 1–5. doi:10.1109/TASC.2024.3392961

Transient Simulations for HTS Cables - Development of a Lumped Thermal Model
Batista de Sousa, W. T.
2024, May 15. 9th International Workshop on Numerical Modelling of High Temperature Superconductors (HTS 2024), Bad Zurzach, Switzerland, June 10–13, 2024

Evidence of Gd substitution for Y in YBCO films with Gd excess
Reale, P.; Pinto, V.; Cayado, P.; Celentano, G.; Armenio, A. A.; et al.
2024. Journal of Alloys and Compounds, 983, Art.-Nr.: 173921. doi:10.1016/j.jallcom.2024.173921

Modeling HTS Coils With Different Coupling Scenarios via Integral Method
Chow, C. C. T.; Zhang, M.; Chau, K. T.; Grilli, F.
2024. IEEE transactions on applied superconductivity, 34 (9), 1–9. doi:10.1109/TASC.2024.3450991

SuperLink - Deployment of Superconducting Power Cables for Power Grid Enhancement
De Sousa, W.; Noe, M.; Grohmann, S.; Boehm, F.; Willém, D.; et al.
2024, September 13. Applied Superconductivity Conference (ASC 2024), Salt Lake City, UT, USA, September 1–6, 2024

Experiments with a superconducting full bridge inverter
Noe, M.; Pham, Q. H.
2024, September 4. Applied Superconductivity Conference (ASC 2024), Salt Lake City, UT, USA, September 1–6, 2024

HTS power applications and cooling system developments in Europe
Grohmann, S.; Noe, M.
2024, October 23. 4th International Workshop on Cooling Systems for High-temperature Superconductor Applications (IWC-HTS 2024), Matsue, Japan, October 23–25, 2024

A Process Simulator for the Prediction and Optimization of the Operation of the Fuel Cycle of a Fusion Power Plant. PhD dissertation
Schwenzer, J. C.
2024, October 17. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000175224

Assessment of Metal Foil Pump Configurations for EU-DEMO
Luo, X.; Kathage, Y.; Teichmann, T.; Hanke, S.; Giegerich, T.; et al.
2024. Energies, 17 (16), Art.-Nr.: 3889. doi:10.3390/en17163889

Thermal-electrical analogy for simulations of superconducting power cables
de Sousa, W. T. B.; Kottonau, D.; Murta-Pina, J.; Morandi, A.; Noe, M.
2024. Superconductor Science and Technology, 37 (9), Art.-Nr.: 095004. doi:10.1088/1361-6668/ad637b

Realistic Evaluation of Resistive Superconducting Fault Current Limiters in Distribution Networks
Dong, Q.; Sousa, W. T. B. de
2024. IEEE Transactions on Applied Superconductivity, 34 (3), Art.-Nr.: 5600909. doi:10.1109/TASC.2024.3356425

Partially Isolated Multi-Active Bridge DC-DC Converter with Bidirectional EV Charging Ports
Lukianov, M.; Cadaval, E. R.; Arena, G.; Strzelecki, R.
2024. 2024 IEEE 18th International Conference on Compatibility, Power Electronics and Power Engineering (CPE-POWERENG), Gdynia, 24th-26th June 2024, 1–7, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/CPE-POWERENG60842.2024.10604312

Physics basis for the divertor tokamak test facility
Crisanti, F.; Ambrosino, R.; Falessi, M. V.; Gabellieri, L.; Giruzzi, G.; et al.
2024. Nuclear Fusion, 64 (10), 106040. doi:10.1088/1741-4326/ad6e06

An Inverse Study of Transient Response of a No-Insulation Coil with AC Currents Based on Simplified Equivalent Circuit Models
Liu, Y.; Li, L.; Lin, J.; Ou, J.; Liu, Y.; et al.
2024. 2024 IEEE 7th International Electrical and Energy Conference (CIEEC), Harbin 10th -12th May 2024, 3014 – 3020, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/CIEEC60922.2024.10583399

Structural analysis and transport properties of [010]-tilt grain boundaries in Fe(Se,Te)
Iida, K.; Yamauchi, Y.; Hatano, T.; Walter, K.; Holzapfel, B.; et al.
2024. Science and Technology of Advanced Materials, 25, Article no: 2384829. doi:10.1080/14686996.2024.2384829

Optimization studies on accelerator sample components for energy management purposes
Abusaif, F.; Bründermann, E.; De Carne, G.; Grau, A.; Krasch, B.; et al.
2024, May. 15th International Particle Accelerator Conference (IPAC 2024), Nashville, TN, USA, May 19–24, 2024

First Year of Data Taking with the Electricity Meter Network for Sustainable Operation of the KIT Accelerator Facilities for the KITTEN Project
Gethmann, J.; Mohammad Zadeh, M.; Bründermann, E.; Blomley, E.; Hoteit, H.; et al.
2024, May. 15th International Particle Accelerator Conference (IPAC 2024), Nashville, TN, USA, May 19–24, 2024

Design study of a compact superconducting undulator based on laser-structured HTS tapes
Krasch, B.; Abusaif, F.; Grau, A.; Glamann, N.; Nast, R.; et al.
2024. 15th International Particle Accelerator Conference, Nashville, Tennessee : May 19-24, 2024, Nashville, Tennessee, USA : proceedings. Ed.: F. Pilat, 3781–3784, JACoW Publishing. doi:10.18429/JACoW-IPAC2024-THPS22

Optimization studies on accelerator sample components for energy management purposes
Abusaif, F.; Grau, A.; Müller, A.-S.; Krasch, B.; Jauregui, D. S. de; et al.
2024. 15th International Particle Accelerator Conference, Nashville, Tennessee : May 19-24, 2024, Nashville, Tennessee, USA : proceedings. Ed.: F. Pilat, 2887–2890, JACoW Publishing. doi:10.18429/JACoW-IPAC2024-WEPS79

First year of data taking with the electricity meter network for sustainable operation of the KIT accelerator facilities for the KITTEN project
Gethmann, J.; Mueller, A.-S.; Blomley, E.; Bruendermann, E.; De Carne, G.; et al.
2024. 15th International Particle Accelerator Conference, Nashville, Tennessee : May 19-24, 2024, Nashville, Tennessee, USA : proceedings. Ed.: F. Pilat, 2883–2886, JACoW Publishing. doi:10.18429/JACoW-IPAC2024-WEPS78

AppLHy! und TransHyDE - Hybride Pipeline: Synergetische Energieübertragung mittels HTS und LH2
Palacios, S.; Wehr, M.
2024, April 11. ZIEHL IX (2024), Berlin, Germany, April 10–11, 2024

Charakterisierung plasma-getriebener Permeation zur Entwicklung einer wasserstoffselektiven Vakuumpumpe = Characterization of plasma-driven permeation for the development of a hydrogen-selective vacuum pump. PhD dissertation
Kathage, Y.
2024, August 1. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000172975

High-Entropy Superconducting Materials
Cayado, P.; Hänisch, J.
2024. High Entropy Alloys - Composition and Microstructure Design. Ed.: Y. Yin, IntechOpen. doi:10.5772/intechopen.1005291

Knowledge-Guided Learning of Temporal Dynamics and its Application to Gas Turbines
Bielski, P.; Eismont, A.; Bach, J.; Leiser, F.; Kottonau, D.; et al.
2024. 15th ACM International Conference on Future and Sustainable Energy Systems, Singapur, 4th-7th June 2024, 279–290, Association for Computing Machinery (ACM). doi:10.1145/3632775.3661967

DSDApp: An Open-Access Tool for Definitive Screening Design
Hayasaka, R.; Hänisch, J.; Cayado, P.
2024. Journal of Open Research Software, 12. doi:10.5334/jors.462

Study of vortex glass-liquid transition and superconducting properties of single-crystalline boron-doped FeSe0.5Te0.5
Zhang, J.; Luo, Y.; Hänisch, J.; Feng, Y.; Yang, X. S.; et al.
2024. Journal of Alloys and Compounds, 999, 174908. doi:10.1016/j.jallcom.2024.174908

Precise determination of oxygen content in SmBa2Cu3O7-δ thin film samples using x-ray diffraction
Walter, K.; Erbe, M.; Welle, A.; Hänisch, J.; Holzapfel, B.
2024. Superconductor Science and Technology. doi:10.1088/1361-6668/ad4a30

Experimental and Numerical Investigation of Expanding Mercury Vapor Jets
Teichmann, T.; Giegerich, T.; Jäger, M.; Day, C.
2024. IEEE Transactions on Plasma Science, 1–7. doi:10.1109/TPS.2024.3394756

Divertor enrichment of recycling impurity species (He, N 2 , Ne, Ar, Kr) in ASDEX Upgrade H-modes
ASDEX Upgrade Team; Kallenbach, A.; Dux, R.; Henderson, S. S.; Tantos, C.; et al.
2024. Nuclear Fusion, 64 (5), Art.-Nr.: 056003. doi:10.1088/1741-4326/ad3139

3D modeling and measurement of HTS tape stacks in linear superconducting magnetic bearings
Ghabeli, A.; Fuchs, G.; Hänisch, J.; Zhou, P.; de Haas, O.; et al.
2024. Superconductor Science and Technology, 37 (6), Art.-Nr.: 065003. doi:10.1088/1361-6668/ad3c9a

Effect of local and global screening current on the current decay in closed-loop HTS coils
Zhou, P.; Zhang, S.; Wang, R.; Li, S.; Grilli, F.; et al.
2024. Superconductor Science and Technology, 37 (6), Art.-Nr.: 065001. doi:10.1088/1361-6668/ad3f7f

Rarefied gas flow in functionalized microchannels
Kunze, S.; Perrier, P.; Groll, R.; Besser, B.; Varoutis, S.; et al.
2024. Scientific Reports, 14 (1), Artkl.Nr.: 8559. doi:10.1038/s41598-024-59027-1

Long term hydrogen storage properties of ZK60 Mg-alloy as processed by different methods of SPD
Cengeri, P.; Kimoto, Y.; Janoska, M.; Abbasi, Z.; Morisada, Y.; et al.
2024. Journal of Materials Science, 59 (14), 5906–5922. doi:10.1007/s10853-024-09529-0

KARA, KITTEN, EL2.0
Müller, A.-S.; Carne, G. De
2024. doi:10.5445/IR/1000170555

Experimental Data for the Paper "Knowledge-Guided Learning of Temporal Dynamics and its Application to Gas Turbines"
Bielski, P.; Kottonau, D.
2024, April 26. doi:10.35097/sLJiahifxvfDKMEc

Atomic hydrogen production in a cold plasma for application in a metal foil pump
Kathage, Y.; Hanke, S.; Giegerich, T.; Day, C.
2024. Physics of Plasmas, 31 (4), Art.-Nr.: 043503. doi:10.1063/5.0190210

Numerical cooling power predictions for a dilution refrigerator via kinetic modeling
Zilz, A.; Tantos, C.; Day, C.; Adam, V.; Wernsdorfer, W.
2024. 32nd International Symposium on Rarefied Gas Dynamics (2022), 32nd International Symposium on Rarefied Gas Dynamics (2022), Seoul, Südkorea, 04.07.2022–08.07.2022, Artkl.Nr.: 180001, AIP Publishing. doi:10.1063/5.0187447

Oxygen Annealing of GdBa₂Cu₃O₇₋ Superconducting Thin Films: Influence of Annealing Time
Popov, R.; Hänisch, J.; Holzapfel, B.
2024. IEEE transactions on applied superconductivity, 34 (3), Article no: 7200104. doi:10.1109/TASC.2023.3345265

Ab-initio simulations of atomic hydrogen interaction with Nb and V at clean and oxygen covered surfaces
Vazquez Cortes, A.; Day, C.; Stihl, C.; Vladimirov, P. V.
2024. Nuclear Materials and Energy, 38, Art.-Nr.: 101600. doi:10.1016/j.nme.2024.101600

Analytical Formulae for Hysteresis Power Loss in Twisted Stacked HTS Cables
Macchiagodena, A.; Breschi, M.; De Marzi, G.; Grilli, F.; Savoldi, L.
2024. IEEE Transactions on Applied Superconductivity, 34 (3), Art.-Nr.: 8200305. doi:10.1109/TASC.2024.3369581

Virtual Synchronous Machine integration on a Commercial Flywheel for Frequency Grid Support
Reißner, F.; Carne, G. De
2024. IEEE Transactions on Power Electronics, 39 (10), 12086–12090. doi:10.1109/TPEL.2024.3369980

Untersuchung von Wechselstromverlusten verschiedener hochtemperatursupraleitender Mehrleiterkonzepte für dreiphasige Hochstromanwendungen. PhD dissertation
Räch, C.
2024, March 7. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000168809

The Garber Current Pattern: An Additional Contribution to AC Losses in Helical HTS Cables?
Elschner, S.; Kudymow, A.; Riva, N.; Grilli, F.
2024. IEEE Transactions on Applied Superconductivity, 34 (3), 1–5. doi:10.1109/TASC.2024.3356435

Characterization of the Mechanical and Thermal Properties, Including Fracture Toughness, of Epoxy Resin System DGEBA, POPDA (D400)
Taylor, O.; Gao, Y.; Lakrimi, M.; Evans, D.; Evans, D.; et al.
2024. IEEE Transactions on Applied Superconductivity, 34 (5), 1–5. doi:10.1109/TASC.2024.3358265

Building the Runway: A New Superconducting Magnet Test Facility Made for the SPARC Toroidal Field Model Coil
Golfinopoulos, T.; Michael, P. C.; Ihloff, E.; Zhukovsky, A.; Nash, D.; et al.
2024. IEEE transactions on applied superconductivity, 34 (2), Article no: 0600416. doi:10.1109/TASC.2024.3352395

Effect of transverse compressive stress applied at room temperature on NbSn Rutherford cables
Lenoir, G.; Puthran, K.; Barth, C.; Fleiter, J.; Ballarino, A.
2024. Superconductor Science and Technology, 37 (2), Art.-Nr.: 025013. doi:10.1088/1361-6668/ad1341

Extensive analysis of the applicability range of the linear kinetic approaches in the case of the pressure driven gas mixture flows
Tantos, C.; Teichmann, T.; Sarris, I.; Day, C.
2024. Physics of Fluids, 36 (1), Art.-Nr.: 012009. doi:10.1063/5.0180350

Enhancing grid protection: The crucial role of resistive-type superconducting fault current limiters in transmission line current differential relays
Dong, Q.; Wang, H.; Chen, B.; Zhang, N.; Sousa, W. T. B. de; et al.
2024. International Journal of Electrical Power & Energy Systems, 156, Article no: 109711. doi:10.1016/j.ijepes.2023.109711

Mitigating commutation failures in HVDC systems with SFCL deployment
Dong, Q.; Wang, H.; Chen, B.; Zhang, N.; Sousa, W. T. B. de; et al.
2024. International Journal of Electrical Power & Energy Systems, 156, Article no: 109712. doi:10.1016/j.ijepes.2023.109712

Erratum: Towards a muon collider
Accettura, C.; Adams, D.; Agarwal, R.; Ahdida, C.; Aimè, C.; et al.
2024. The European Physical Journal C, 84 (1), Art.-Nr.: 36. doi:10.1140/epjc/s10052-023-12257-5

50 kA Capacity, Nitrogen-Cooled, Demountable Current Leads for the SPARC Toroidal Field Model Coil
Fry, V.; Zhukovsky, A.; Wolf, M. J.; Michael, P. C.; Vieira, R. F.; et al.
2024. IEEE Transactions on Applied Superconductivity, 34 (2), 1–18. doi:10.1109/TASC.2024.3354237

Modeling Superconducting Components of the Electric Aircraft
Khonya, A.; Noe, M.; Sousa, W. T. B. de; Berg, F.; Cooper, M.
2024. IEEE Transactions on Applied Superconductivity, 34 (3), Article no: 3800205. doi:10.1109/TASC.2024.3350599

High Entropy Alloys and Compositionally Complex Alloys for Extreme Application Conditions
Kauffmann, A.
2024, January 24. Seminar des Institut für Werkstofftechnik der Universität Kassel (2024), Kassel, Germany, January 24, 2024

Thermal and Electrical Resistance of HTS Tapes Stacks in Radial Direction
Bagrets, N.; Weiss, K.-P.
2024. IEEE Transactions on Applied Superconductivity, 34 (3), Art.-Nr.: 8800204. doi:10.1109/TASC.2023.3341891

The SPARC Toroidal Field Model Coil Program
Hartwig, Z. S.; Vieira, R. F.; Dunn, D.; Golfinopoulos, T.; LaBombard, B.; et al.
2024. IEEE transactions on applied superconductivity, 34 (2), Art.-Nr.: 0600316. doi:10.1109/TASC.2023.3332613

Numerical modeling and characterization of high-temperature superconductor coils for electrical machines. PhD dissertation
Vargas-Llanos, C. R.
2023, May 15. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000158562

Adaptive Virtual Synchronous Machine Control for Asynchronous Grid Connections
Wald, F.; Carne, G. De
2023. 2023 11th International Conference on Power Electronics and ECCE Asia (ICPE 2023 - ECCE Asia), 991–996, Institute of Electrical and Electronics Engineers (IEEE). doi:10.23919/ICPE2023-ECCEAsia54778.2023.10213782

P-Q Theory-based Dynamic Load Modelling in Short-Circuit Analysis
Rajashekaraiah, K.; Carne, G. De; Iurlaro, C.; Semeraro, M.; Bruno, S.
2023. 2023 8th IEEE Workshop on the Electronic Grid (eGRID), 5 S., Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/eGrid58358.2023.10380853

Impedance-based Stability Analysis of a Power Hardware-in-the-Loop for Grid-Following Inverter Testing
Ashrafidehkordi, F.; Liu, X.; Carne, G. De
2023. 2023 IEEE Energy Conversion Congress and Exposition (ECCE), 1116–1121, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/ECCE53617.2023.10362808

Investigation of Frequency Dependency of Residential Loads in Modern Power Systems: An Experimental Approach
Tao, Q.; Geis-Schroer, J.; Courcelle, M.; Leibfried, T.; Carne, G. De
2023. 2023 11th International Conference on Power Electronics and ECCE Asia (ICPE 2023 - ECCE Asia), 329–334, Institute of Electrical and Electronics Engineers (IEEE). doi:10.23919/ICPE2023-ECCEAsia54778.2023.10213527

DC Fast Charging of Electric Vehicles: a Review on Architecture and Power Conversion Technology
Arena, G.; Emiliani, P.; Chub, A.; Vinnikov, D.; Carne, G. De
2023. IEEE 17th International Conference on Compatibility, Power Electronics and Power Engineering (CPE-POWERENG 2023), 6 S., Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/CPE-POWERENG58103.2023.10227492

Methods Comparison for Load Sensitivity Identification
Courcelle, M.; Tao, Q.; Geis-Schroer, J.; Bruno, S.; Leibfried, T.; et al.
2023. 2023 IEEE Belgrade PowerTech, Belgrade, Serbia, 25-29 June 2023, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/PowerTech55446.2023.10202677

Roadmap on Artificial intelligence and big data techniques for superconductivity
Yazdani-Asrami, M.; Song, W.; Morandi, A.; Carne, G.; Pina, J. M.; et al.
2023. Superconductor Science and Technology, 36 (4), Art.-Nr.: 043501. doi:10.1088/1361-6668/acbb34

Virtual Synchronous Machine Control for Asynchronous Grid Connections
Wald, F.; Tao, Q.; Carne, G. De
2023. IEEE Transactions on Power Delivery, 39 (1), 397–406. doi:10.1109/TPWRD.2023.3235149

Realization of an Energy System-Informed Digital Twin of the KARA Accelerator at KIT in a Real-Time Simulation Environment: the ACCESS Project
Mohammad Zadeh, M.
2023, May. 14th International Particle Accelerator Conference (IPAC 2023), Venice, Italy, May 7–12, 2023

The fuel cycle simulator of the EU-DEMO fuel cycle
Schwenzer, J. C.
2023. 30th IEEE Symposium on Fusion Engineering (SOFE 2023), Oxford, United Kingdom, July 9–13, 2023

Experimental Progress in the Development of a Metal Foil Pump for DEMO
Kathage, Y.; Vazquez Cortes, A.; Merli, S.; Day, C.; Giegerich, T.; et al.
2023. Plasma, 6 (4), 714–734. doi:10.3390/plasma6040049

Development of non evaporable getter pumps for large hydrogen throughput and capacity in high vacuum regimes
Sartori, E.; Siragusa, M.; Sonato, P.; Siviero, F.; Mura, M.; et al.
2023. Vacuum, 214, Art.-Nr.: 112198. doi:10.1016/j.vacuum.2023.112198

Admixed pellets for fast and efficient delivery of plasma enhancement gases: Investigations at AUG exploring the option for EU-DEMO
Lang, P. T.; Baylor, L. R.; Day, C.; Dux, R.; McDermott, R. M.; et al.
2023. Fusion Engineering and Design, 196, Art.-Nr.: 114020. doi:10.1016/j.fusengdes.2023.114020

Divertor power spreading in the Divertor Tokamak Test facility for a full power scenario with Ar and Ne seeding
Ivanova-Stanik, I.; Chmielewski, P.; Day, C.; Innocente, P.; Zagórski, R.
2023. Plasma Physics and Controlled Fusion, 65 (5), 055009. doi:10.1088/1361-6587/acc2e3

Targeting a Versatile Actuator for EU-DEMO: Real Time Monitoring of Pellet Delivery to Facilitate Burn Control
Lang, P. T.; van Berkel, M.; Biel, W.; Bosman, T. O. S. J.; David, P.; et al.
2023. Fusion Science and Technology, 80 (1), 26–37. doi:10.1080/15361055.2023.2188932

Modeling of the HCPB Helium Coolant Purification System for EU-DEMO: Process Simulations of Molecular Sieves and NEG Sorbents
Schwenzer, J. C. C.; Santucci, A.; Day, C.
2023. Fusion Science and Technology, 79 (8), 1208–1218. doi:10.1080/15361055.2023.2189550

Experimental Characterization of an NEG Pump of Novel Size—A Major Step toward Its Application in DEMO Neutral Beam Injectors
Hanke, S.; Day, C.; Giegerich, T.; Luo, X.; Siviero, F.; et al.
2023. Energies, 16 (7), Artkl.Nr.: 3148. doi:10.3390/en16073148

Testbed for the Pellet Launching System for JT-60SA
Ploeckl, B.; Lang, P. T.; Day, C.; Giegerich, T.; Phillips, G.; et al.
2023. Fusion Engineering and Design, 186, Art.-Nr.: 113370. doi:10.1016/j.fusengdes.2022.113370

Kinetic modeling of polyatomic heat and mass transfer in rectangular microchannels
Tantos, C.; Kritikos, E.; Varoutis, S.; Day, C.
2023. Heat and Mass Transfer, 59, 167–184. doi:10.1007/s00231-022-03224-z

Assessment of MHD-relevant parameters in high enthalpy air plasma for flow manipulation experiments
Oswald, J. W.; Behnke, A.; Herdrich, G.; Schlachter, S. I.; Dalban-Canassy, M.; et al.
2023. Vacuum, 217, Article no: 112504. doi:10.1016/j.vacuum.2023.112504

Superconducting Magnet Technology – status, trends and prospects
Arndt, T.
2023, September 20. 44th FGMR Annual Discussion Meeting (2023), Konstanz, Germany, September 18–21, 2023

Three-Phase Four Wire High-Frequency Link Converter for Residential DC Grids
Emiliani, P.; Blinov, A.; Carne, G. De; Arena, G.; Vinnikov, D.
2023. IEEE 17th International Conference on Compatibility, Power Electronics and Power Engineering (CPE-POWERENG), 5 S., Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/CPE-POWERENG58103.2023.10227416

Predictive Control for Isolated Matrix Rectifier Without Current Distortion at Sector Boundary
Emiliani, P.; Blinov, A.; Carne, G. De; Arena, G.; Vinnikov, D.
2023. IEEE 17th International Conference on Compatibility, Power Electronics and Power Engineering (CPE-POWERENG), 6 S., Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/CPE-POWERENG58103.2023.10227405

Hydrogen liquefaction, storage, transport and application of liquid hydrogen
Alekseev, A.; Arndt, T.; Haberstroh, C.; Jordan, T.; Lindackers, D.; et al.
2023. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000168281

AppLHy! – Transport and Application of Liquid Hydrogen
Wolf, M.
2023, March 28. European Cryogenic Days (2023), Darmstadt, Germany, March 28–29, 2024

Elektromagnetische und Thermohydraulische Designaspekte Hybrider Pipelines
Wolf, M.; Wehr, M.; Palacios, S.
2023, September 22. 12. Braunschweiger Energieseminare (2023), Brunswick, Germany, September 20–21, 2023

AppLHy!: AP3.1: in Antriebssträngen großer Fahrzeuge
Arndt, T.; Taalibi, O.; Oliveira, R. A. H. de; Wolf, M. J.
2023, November 29. 3. TransHyDE Vollversammlung (2023), Leipzig, Germany, November 29–30, 2023

Supraleiter und Wasserstoff - Defossilisierung und Sektorkopplung
Arndt, T.
2023, April 20. 1. Rheinland-pfälzischer Supraleiterkongress "Zukunftstechnologie mit wirtschaftlichem Nutzen" (2023), Mainz-Finthen, April 20, 2023

Wasserstoff-Verflüssigung, Speicherung, Transport und Anwendung von flüssigem Wasserstoff
Wolf, M. J.; Arndt, T.; Jordan, T.; Pundt, A.; Weiss, K.-P.; et al.
2023. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000155199

SuperLink Development and Impacts of a Superconducting Power Cable in a 110kV Distribution Network
Batista de Sousa, W. T.; Noe, M.; Grohmann, S.; Boehm, F.; Willén, D.; et al.
2023, July 13. 25th Joint Cryogenic Engineering Conference and International Cryogenic Materials Conference (CEC/ICMC 2023), Honolulu, HI, USA, July 9–13, 2023

SuperLink - Development and Impacts of a Superconducting Power Cable in a 110kV Distribution Network
Batista De Sousa, W. T.; Noe, M.; Grohmann, S.; Boehm, F.; Willén, D.; et al.
2023, September 6. 16th European Conference on Applied Superconductivity (EUCAS 2023), Bologna, Italy, September 3–7, 2023

Combined Energy Transmission by LH₂ and HTS: Study of a Hybrid Pipeline
Palacios, S.; Wehr, M.; Wolf, M. J.; Noe, M.; Arndt, T.
2023, September 6. 16th European Conference on Applied Superconductivity (EUCAS 2023), Bologna, Italy, September 3–7, 2023. doi:10.13140/RG.2.2.10355.75046

Numerical and experimental investigations of a linear microwave plasma source for metal foil pumps for DEMO
Merli, S.; Kathage, Y.; Schulz, A.; Walker, M.; Hanke, S.; et al.
2023. 49th EPS Conference on Plasma Physics, EPS 2023, Art.-Nr.: 200361, European Physical Society (EPS)

The Garber Current Pattern: An Additional Contribution to AC Losses in Helical HTS Cables?
Elschner, S.; Kudymow, A.; Riva, N.; Grilli, F.
2023. doi:10.48550/arXiv.2309.07292

Simulation-Based Insights into Resistive Superconducting Fault Current Limiter Integration for Enhanced Stability in a German Power Distribution Network
Dong, Q.; Sousa, W. T. B. de
2023. 2023 IEEE International Conference on Advanced Power System Automation and Protection (APAP), 471–478, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/APAP59666.2023.10348472

System Level Modeling of Electrolyzers for Digital Real-Time Applications
Nemsow, N.; Carne, G. De
2023. 2023 IEEE PES Innovative Smart Grid Technologies Europe (ISGT EUROPE), Grenoble, France, 23-26 October 2023, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/ISGTEUROPE56780.2023.10407957

Simulation Models for Superconducting Components of the Electric Aircraft
Khonya, A.; Noe, M.; De Sousa, W. T. B.; Berg, F.; Cooper, M.
2023. 2023 8th IEEE Workshop on the Electronic Grid (eGRID), 7 S., Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/eGrid58358.2023.10380880

How can Machine Learning help Future Light Sources?
Santamaria Garcia, A.; Xu, C.; Scomparin, L.; Bründermann, E.; Caselle, M.; et al.
2023. Future Light Sources 2023 : 67th ICFA Advanced Beam Dynamics Workshop FLS 2023, 249–256, JACoW Publishing. doi:10.18429/JACoW-FLS2023-TH3D3

Modelling of 3-Phase p-q Theory-Based Dynamic Load for Real-Time Simulation
Rajashekaraiah, K.; Iurlaro, C.; Bruno, S.; Carne, G. De
2023. IEEE Open Access Journal of Power and Energy, 10, 654–664. doi:10.1109/OAJPE.2023.3340299

Supercapacitor Modeling and Parameter Identification of a 400 kW Grid-Connected Supercapacitor Energy Storage System using the Inherent Impedance Spectroscopy Capability of its DC/DC Converter
Hetzel, M.; Diaz Ocampo, D.; Carne, G. De; Hiller, M.
2023. 2023 IEEE Energy Conversion Congress and Exposition (ECCE), 459–465, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/ECCE53617.2023.10362651

Preliminary Studies of a New Superconducting Magnet Based on Disk-up-down-assembly
Liu, Y.; Lin, J.; Wang, R.; Xue, H.; Li, L.; et al.
2023. 2023 26th International Conference on Electrical Machines and Systems (ICEMS), 3709–3714, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/ICEMS59686.2023.10417856

Common Challenges and goals when using HTS in power engineering and accelerators
Arndt, T.
2023, September 6. 16th European Conference on Applied Superconductivity (EUCAS 2023), Bologna, Italy, September 3–7, 2023

Large Scale Superconducting Applications – Status and Prospects
Arndt, T.
2023, May 2. Gordon Research Conference Superconductivity "Interactions, Topology and Applications" (CRC 2023), Les Diablerets, Switzerland, April 30–May 5, 2023

Simulation Models for Superconducting Components of the Electric Aircraft
Khonya, A.; Noe, M.; Sousa, W. T. B. De; Berg, F.; Cooper, M.
2023, October 18. 8th IEEE Workshop on the Electronic Grid (eGrid 2023), Karlsruhe, Germany, October 16–18, 2023. doi:10.13140/RG.2.2.11423.33441

Modeling Superconducting Components of the Electric Aircraft
Khonya, A.; Noe, M.; Sousa, W. T. B. De; Berg, F.; Cooper, M.
2023, September 6. 16th European Conference on Applied Superconductivity (EUCAS 2023), Bologna, Italy, September 3–7, 2023. doi:10.13140/rg.2.2.28997.01767

3D modeling of stack-type superconducting magnetic bearings
Ghabeli, A.; Grilli, F.; Hänisch, J.; Fuchs, G.; de Haas, O.; et al.
2023, September 4. 16th European Conference on Applied Superconductivity (EUCAS 2023), Bologna, Italy, September 3–7, 2023. doi:10.5281/zenodo.10016436

Influence of thinned (RE)BCO conductors on the properties of stacked tapes
Nast, R.; Ringsdorf, B.; Hänisch, J.; Fuchs, G.; De Haas, O.
2023, September 6. 16th European Conference on Applied Superconductivity (EUCAS 2023), Bologna, Italy, September 3–7, 2023

HTS-Tape Magnetic Bearing for Ultra High-Speed Turbo Motor
Oliveira, R.; Zeng, X.; Pei, X.; Burke, R.
2023. IEEE transactions on applied superconductivity, 33 (5), 1–5. doi:10.1109/tasc.2023.3253064

Performance Analysis of Resistive Superconducting Fault Current Limiter Using LN 2 and GHe Cooling
Oliveira, R.; Pei, X.; Nilsson, E.; Rouquette, J.- francois; Rivenc, J.; et al.
2023. IEEE transactions on applied superconductivity, 33 (5), 1–10. doi:10.1109/TASC.2023.3237642

Oxygen annealing: a tool for tailoring the pinning landscape in GdBCO thin films
Popov, R.; Cayado, P.; Rijckaert, H.; Grünewald, L.; Gerthsen, D.; et al.
2023, September 4. 16th European Conference on Applied Superconductivity (EUCAS 2023), Bologna, Italy, September 3–7, 2023

Numerical modelling of HTS tapes under arbitrary external field and transport current via integral method: review and application to electrical machines *
Chow, C. C. T.; Grilli, F.; Chau, K. T.
2023. Superconductor Science and Technology, 36 (11), Art.-Nr.: 115027. doi:10.1088/1361-6668/ace701

Towards a muon collider
Accettura, C.; Adams, D.; Agarwal, R.; Ahdida, C.; Aimè, C.; et al.
2023. The European Physical Journal C, 83 (9), Art.-Nr.: 864. doi:10.1140/epjc/s10052-023-11889-x

Analytical electron microscopy study of the composition of BaHfO; nanoparticles in REBCO films: the influence of rare-earth ionic radii and REBCO composition
Grünewald, L.; Cayado, P.; Erbe, M.; Hänisch, J.; Holzapfel, B.; et al.
2023. Materials Advances, 4 (24), 6507–6521. doi:10.1039/D3MA00447C

Addendum to “Comparison of Constitutive Laws for Modeling High-Temperature Superconductors”
Sirois, F.; Grilli, F.; Morandi, A.
2023. IEEE Transactions on Applied Superconductivity, 33 (8), 1–1. doi:10.1109/TASC.2023.3318573

Numerical Assessment of the Inhomogeneous Temperature Field and the Quality of Heat Extraction of Nb₃Sn Impregnated Magnets for the High Luminosity Upgrade of the LHC
Borges de Sousa, P.; Puthran, K.; Sabate-Gilarte, M.; Cerutti, F.; Bermudez, S. I.; et al.
2023. IEEE transactions on applied superconductivity, 33 (5), Art.-Nr.: 4000705. doi:10.1109/TASC.2023.3240126

Vakuumtechnik und Gefahren im Umgang mit Kryogenen
Neumann, H.
2023, September 29. Haus der Technik - Seminar - Kryostatbau (2023), Karlsruhe, Germany, September 27–29, 2023

MSR - Sicherheitstechnik
Neumann, H.
2023, September 28. Haus der Technik - Seminar - Kryostatbau (2023), Karlsruhe, Germany, September 27–29, 2023

MSR - Kryoventile
Neumann, H.
2023, September 28. Haus der Technik - Seminar - Kryostatbau (2023), Karlsruhe, Germany, September 27–29, 2023

MSR - Prozessmesstechnik
Neumann, H.
2023, September 28. Haus der Technik - Seminar - Kryostatbau (2023), Karlsruhe, Germany, September 27–29, 2023

MSR - kryogene Temperaturmessung
Neumann, H.
2023, September 28. Haus der Technik - Seminar - Kryostatbau (2023), Karlsruhe, Germany, September 27–29, 2023

Thermodynamische Grundlagen
Neumann, H.
2023, September 27. Haus der Technik - Seminar - Kryostatbau (2023), Karlsruhe, Germany, September 27–29, 2023

Sicherheitstechnik - Gefahren im Umgang mit Kryogenen
Neumann, H.
2023, September 14. 51. VDI-Forum Kryotechnik - Grundlagen und Arbeitstechniken, Entwicklungsstand, -tendenzen, Anwendungen (2023), Karlsruhe, Germany, September 13–15, 2023

Tieftemperaturmess- und -regelungstechnik
Neumann, H.
2023, September 14. 51. VDI-Forum Kryotechnik - Grundlagen und Arbeitstechniken, Entwicklungsstand, -tendenzen, Anwendungen (2023), Karlsruhe, Germany, September 13–15, 2023

Thermische Isolation
Neumann, H.
2023, September 14. 51. VDI-Forum Kryotechnik - Grundlagen und Arbeitstechniken, Entwicklungsstand, -tendenzen, Anwendungen (2023), Karlsruhe, Germany, September 13–15, 2023

Wärmeübertragung an Kryogene - Kühltechniken
Neumann, H.
2023, September 13. 51. VDI-Forum Kryotechnik - Grundlagen und Arbeitstechniken, Entwicklungsstand, -tendenzen, Anwendungen (2023), Karlsruhe, Germany, September 13–15, 2023

Thermodynamische Grundlagen der Kälteerzeugung
Neumann, H.
2023, September 13. 51. VDI-Forum Kryotechnik - Grundlagen und Arbeitstechniken, Entwicklungsstand, -tendenzen, Anwendungen (2023), Karlsruhe, Germany, September 13–15, 2023

Design optimization of a stepped HTS magnet for electrodynamic suspension train
Li, S.; Liu, B.; Zhou, P.; Wang, R.; Wu, X.; et al.
2023. Superconductor Science and Technology, 36 (11), Art.Nr.: 115015. doi:10.1088/1361-6668/acf73a

Superconducting undulators: permanent magnets after all
Hänisch, J.
2023. Superconductor Science and Technology, 36 (9), Art.Nr.: 090501. doi:10.1088/1361-6668/aced71

Characterization of superconducting microwave resonators for quantum sensing applications. master’s thesis
Hauswald, L.
2023, October 27. Karlsruher Institut für Technologie (KIT)

First operation and validation of simulations for the divertor Cryo-Vacuum Pumps in W7-X
W7-X Team; Dhard, C. P.; Haak, V.; Bräuer, T.; Bykov, V.; et al.
2023, October. 29th IAEA Fusion Energy Conference (FEC 2023), London, United Kingdom, October 16–21, 2023

Characterization of flux pump-charging of high-temperature superconducting coils using coupled numerical models
Zhou, P.; Ghabeli, A.; Ainslie, M.; Grilli, F.
2023. Superconductor Science and Technology, 36 (11), Art.-Nr. 115002. doi:10.1088/1361-6668/acf739

Influence of tritium distribution in aluminum and iron for shape of the beta-ray induced X-ray spectrum
Hara, M.; Fujimoto, Y.; Akamaru, S.; Aso, T.; Röllig, M.
2023. Fusion Engineering and Design, 196, 114009. doi:10.1016/j.fusengdes.2023.114009

Time-dependent development of dynamic resistance voltage of superconducting tape considering heat accumulation
Li, C.; Xing, Y.; Xin, Y.; Li, B.; Grilli, F.
2023. Superconductivity, 8, Article no: 100066. doi:10.1016/j.supcon.2023.100066

Optimal Design for Hybrid Energy Storage Systems Considering System Aging and Costs
Maroufi, S. M.; Carne, G. De
2023. 2023 IEEE 14th International Symposium on Power Electronics for Distributed Generation Systems (PEDG), 496 – 500, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/PEDG56097.2023.10215260

Charging process simulation of a coil by a self-regulating high-T superconducting flux pump
Zhou, P.; Zhou, Y.; Ainslie, M.; Ghabeli, A.; Grilli, F.; et al.
2023. Superconductivity, 7, Article no: 100061. doi:10.1016/j.supcon.2023.100061

Search for keV-scale sterile neutrinos with the first KATRIN data
Aker, M.; Batzler, D.; Beglarian, A.; Behrens, J.; Berlev, A.; et al.
2023. The European Physical Journal C, 83 (8), Art.-Nr.: 763. doi:10.1140/epjc/s10052-023-11818-y

Magnetic bearings with double crossed loops modelled with T-A formulation and electric circuits
Santos, B. M. O.; dos Santos, G.; Martins, F. G. dos R.; Sass, F.; Sotelo, G. G.; et al.
2023. Superconductivity, 7, Art.-Nr.: 100058. doi:10.1016/j.supcon.2023.100058

Focus on recent advances in superconducting films
Cayado, P.; Hänisch, J.; Iida, K.; Senatore, C.
2023. Superconductor Science and Technology, 36 (9), Art.-Nr.: 090401. doi:10.1088/1361-6668/ace997

Technologien für moderne Elektronenbeschleuniger
Härer, B.; Niehues, G.; Steinmann, J.
2023, June 17. Tag der offenen Tür, KIT Campus Nord (2023), Karlsruher Institut für Technologie, June 17, 2023

A superconducting wireless energiser based on electromechanical energy conversion
Zhang, H.; Yang, T.; Grilli, F.; Li, W.; Tuohy, P. M.; et al.
2023. Superconductivity, 7, Art.-Nr.: 100057. doi:10.1016/j.supcon.2023.100057

Impact of Magnet Number on the DC Output of a Dynamo-Type HTS Flux Pump
Zhou, P.; Ren, G.; Ainslie, M.; Ghabeli, A.; Zhang, S.; et al.
2023. IEEE Transactions on Applied Superconductivity, 33 (8), 1–9. doi:10.1109/TASC.2023.3299601

Performance of low-loss demountable joints between CORC® cable-in-conduit-conductors at magnetic fields up to 8 T developed for fusion magnets
Weiss, J. D.; van der Laan, D. C.; Radcliff, K.; Bagrets, N.; Lange, C.; et al.
2023. Superconductor Science and Technology, 36 (8), Art.Nr.: 085002. doi:10.1088/1361-6668/acdc59

Influence of oxygen annealing on structural and transport properties of pristine and BaHfO3 nanocomposite GdBa2Cu3O7-δ films. PhD dissertation
Popov, R.
2023, August 22. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000161321

380 kV Superconducting Fault Current Limiter Feasibility Study
Noe, M.; Humpert, C.; De Sousa, W.; Fink, S.; Herzog, F.; et al.
2023. KIT Scientific Publishing. doi:10.5445/KSP/1000161057

Investigation of the Properties of 316L Stainless Steel after AM and Heat Treatment
Petroušek, P.; Kvačkaj, T.; Bidulská, J.; Bidulský, R.; Grande, M. A.; et al.
2023. Materials, 16 (11), Art.-Nr. 3935. doi:10.3390/ma16113935

Development and Test of High-Temperature Superconductor Harness for Cryogenic Instruments on Satellites
Schlachter, S. I.; Bagrets, N.; Branco, M. B. C.; Collier-Wright, M.; Dherbécourt, D.; et al.
2023. IEEE Transactions on Applied Superconductivity, 33 (5), 1–5. doi:10.1109/TASC.2023.3241570

Design of a 110-kV 2.0-kA SmartCoil Superconducting Fault Current Limiter
de Sousa, W. T. B.; Noe, M.; Huwer, S.; Reiser, W.
2023. IEEE transactions on applied superconductivity, 33 (4), Art.-Nr.: 5600709. doi:10.1109/TASC.2023.3246818

Optimization of the Crystallization Process of TFA-MOD ErBCO Films on IBAD-Substrate Under Low-Pressure Conditions via DSD Approach
Freitag, W.; Erbe, M.; Hänisch, J.; Holzapfel, B.
2023. IEEE transactions on applied superconductivity, 33 (5), Article no: 6601905. doi:10.1109/TASC.2023.3259922

Multi-rate Discrete Domain Modeling of Power Hardware-in-the-Loop Setups
Ashrafidehkordi, F.; Kottonau, D.; Carne, G.
2023. IEEE Open Journal of Power Electronics, 4, 539–548. doi:10.1109/OJPEL.2023.3283035

Search for Lorentz-invariance violation with the first KATRIN data
KATRIN Collaboration; Aker, M.; Batzler, D.; Beglarian, A.; Behrens, J.; et al.
2023. Physical Review D, 107 (8), Art.-Nr.: 082005. doi:10.1103/PhysRevD.107.082005

High-Temperature Superconductor Application to Undulators for Compact Free-Electron Lasers – Anwendung von Hochtemperatursupraleitern auf Undulatoren für kompakte Freie-Elektronen-Laser. PhD dissertation
Richter, S. C.
2023, June 23. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000159594

A layout of the tritium plant subsystems for the European demonstration fusion power plant. master’s thesis
Constantin, F. M.
2023. Karlsruher Institut für Technologie (KIT)

Tintenstrahldruck für die Metall-Halogenid-Perowskit-Photovoltaik. PhD dissertation
Schackmar, F. R.
2023, June 22. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000159198

Untersuchung zur semi-kontinuierlichen Separation von Wasserstoff-Isotopen für die Fusion = Investigation on the Semi-Continuous Separation of Hydrogen Isotopes for Fusion. PhD dissertation
Neugebauer, C. F. G.
2023, May 19. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000158827

Power-Hardware-in-the-Loop-Systeme als Evaluationsumgebung für Betriebsmittel und Netze der Niederspannung. PhD dissertation
Hubschneider, S.
2023, June 2. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000158632

Recent progress on epitaxial growth of Fe-based superconducting thin films
Iida, K.; Hänisch, J.; Hata, S.; Yamamoto, A.
2023. Superconductor Science and Technology, 36 (6), Article no: 063001. doi:10.1088/1361-6668/acccb2

Compact High-Temperature Superconducting magnets for Laser-Plasma Accelerator beam capture and transport. PhD dissertation
Fatehi, S.
2023, May 8. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000158431

Preliminary design optimization of a fully superconducting motor based on disk-up-down-assembly magnets
Wang, R.; Liu, Y.; Cao, J.; Li, L.; Liu, X.; et al.
2023. Superconductor Science and Technology, 36 (5), Artkl.Nr.: 054003. doi:10.1088/1361-6668/acc822

Raw Data to "Microstructure and mechanical properties of a precipitation-strengthened Fe-Al-Nb alloy"
Nizamoglu, S.; Gedsun, A.; Kauffmann, A.
2023, April 14. doi:10.5445/IR/1000157792

Design and test of a setup for calorimetric measurements of AC transport losses in HTS racetrack coils
Vargas-Llanos, C. R.; Krämer, J.; Noe, M.; Grilli, F.
2023. Superconductor Science and Technology, 36 (4), Artkl.Nr.: 045015. doi:10.1088/1361-6668/acbba5

Onset of Mechanical Degradation due to Transverse Compressive Stress in NbSn Rutherford-Type Cables
Puthran, K.; Barth, C.; Ballarino, A.; Devred, A.; Arndt, T.
2023. IEEE Transactions on Applied Superconductivity, 33 (5), 1–6. doi:10.1109/TASC.2023.3241568

Echtzeitsimulation und Netzintegration einer Mikrogasturbine. PhD dissertation
Kottonau, D.
2023, February 17. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000156019/v2

Transport measurements in single-grain GdBCO+Ag bulk superconductors processed by infiltration growth
Cayado, P.; Namburi, D. K.; Erbe, M.; Hänisch, J.; Cardwell, D. A.; et al.
2023. Applied Physics A, 129 (2), Article no: 137. doi:10.1007/s00339-023-06402-w

Supersaturation and crystallization behaviors of rare-earth based cuprate superconducting films grown by chemical solution deposition
Shi, J.; Zhao, Y.; Wu, Y.; Erbe, M.; Guo, C.; et al.
2023. Applied Surface Science, 612, Art.-Nr.: 155820. doi:10.1016/j.apsusc.2022.155820

Effect of carbon doping on magnetic flux pinning and superconducting performance in FeSeTe single crystals
Zhang, J.; Hänisch, J.; Yang, X. S.; Zhao, K.; Zhao, Y.
2023. Superconductor Science and Technology, 36 (2), Art.-Nr.: 025008. doi:10.1088/1361-6668/acadb5

Simultaneous Twinning and Microband-Induced Plasticity of a Compositionally Complex Alloy with Interstitial Carbon at Cryogenic Temperatures
Tirunilai, A. S.; Osmundsen, R.; Baker, I.; Chen, H.; Weiss, K.-P.; et al.
2023. High Entropy Alloys & Materials, 1, 60–71. doi:10.1007/s44210-022-00001-9

Integration of Flywheel Energy Storage Systems in Low Voltage Distribution Grids. PhD dissertation
Karrari, S.
2023. KIT Scientific Publishing. doi:10.5445/KSP/1000139457

Synchronized Micro-Controllers-based Data Acquisition System for Energy Plants using Modbus Protocol
Courcelle, M.; Kottonau, D.; Carne, G.
2022. 2022 IEEE Energy Conversion Congress and Exposition (ECCE), 1–7, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/ECCE50734.2022.9948022

Power Hardware In the Loop laboratory testing capability for energy technologies
Carne, G.; Kottonau, D.
2022. 2022 AEIT International Annual Conference (AEIT). Rom, Italien, 03-05 October 2022, Hrsg. IEEE, 1–5, Institute of Electrical and Electronics Engineers (IEEE). doi:10.23919/AEIT56783.2022.9951766

Improved Accuracy of the Power Hardware-in-the-Loop Modeling using Multirate Discrete Domain
Ashrafidehkordi, F.; Carne, G.
2022. 13th International Symposium on Power Electronics for Distributed Generation Systems (PEDG), 1–5, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/PEDG54999.2022.9923128

The Potential of Frequency-Based Power Control in Distribution Grids
Tao, Q.; Geis-Schroer, J.; Wald, F.; Courcelle, M.; Langwasser, M.; et al.
2022. 2022 IEEE 13th International Symposium on Power Electronics for Distributed Generation Systems (PEDG), 1–6, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/PEDG54999.2022.9923112

Grid Integration of DC Buildings: Standards, Requirements and Power Converter Topologies
Carvalho, E. L.; Blinov, A.; Chub, A.; Emiliani, P.; Carne, G. de; et al.
2022. IEEE Open Journal of Power Electronics, 3, 789–823. doi:10.1109/OJPEL.2022.3217741

Supercapacitor modelling for real-time simulation applications
Carne, G.; Morandi, A.; Karrari, S.
2022. IEEE Journal of Emerging and Selected Topics in Industrial Electronics, 3 (3), 509–518. doi:10.1109/JESTIE.2022.3165985

Sizing of Hybrid Energy Storage Systems using Recurring Daily Patterns
Karrari, S.; Ludwig, N.; Carne, G.; Noe, M.
2022. IEEE Transactions on Smart Grid, 13 (4), 3290–3300. doi:10.1109/TSG.2022.3156860

On Modeling Depths of Power Electronic Circuits for Real-Time Simulation – A Comparative Analysis for Power Systems
Carne, G.; Lauss, G.; Syed, M. H.; Monti, A.; Benigni, A.; et al.
2022. IEEE open access journal of power and energy, 9, 76–87. doi:10.1109/OAJPE.2022.3148777

Black Start and Fault Tolerant Operation of Isolated Matrix Converter for dc Microgrids
Emiliani, P.; Blinov, A.; Chub, A.; Carne, G.; Vinnikov, D.
2022. IECON 2022 – 48th Annual Conference of the IEEE Industrial Electronics Society, 1–5, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/IECON49645.2022.9968735

Accuracy Analysis of Dual Active Bridge Simulations under Different Integration Methods
Arena, G.; Vinnikov, D.; Chub, A.; Carne, G.
2022. 2022 AEIT International Annual Conference (AEIT), 1–6, Institute of Electrical and Electronics Engineers (IEEE). doi:10.23919/AEIT56783.2022.9951711

Status and future development of Heating and Current Drive for the EU DEMO
Tran, M. Q.; Agostinetti, P.; Aiello, G.; Avramidis, K.; Baiocchi, B.; et al.
2022. Fusion Engineering and Design, 180, Article no: 113159. doi:10.1016/j.fusengdes.2022.113159

Strategy for Developing the EU-DEMO Magnet System in the Concept Design Phase
Corato, V.; Bruzzone, P.; Bykovskiy, N.; Celentano, G.; Della Corte, A.; et al.
2022. IEEE Transactions on Applied Superconductivity, 32 (6), Art.-Nr.: 4201407. doi:10.1109/TASC.2022.3153248

Experimental confirmation of efficient island divertor operation and successful neoclassical transport optimization in Wendelstein 7-X
Sunn Pedersen, T.; Abramovic, I.; Agostinetti, P.; Agredano Torres, M.; Äkäslompolo, S.; et al.
2022. Nuclear Fusion, 62 (4), Article no: 042022. doi:10.1088/1741-4326/ac2cf5

A Magnetohydrodynamic enhanced entry system for space transportation: MEESST
Lani, A.; Sharma, V.; Giangaspero, V. F.; Poedts, S.; Viladegut, A.; et al.
2022. Journal of Space Safety Engineering, 10 (1), 27–34. doi:10.1016/j.jsse.2022.11.004

Design of a 110 kV 2.0 kA SmartCoil SFCL
Batista de Sousa, W. T.; Huwer, S.; Reiser, W.; Noe, M.
2022, October 26. Applied Superconductivity Conference (ASC 2022), Honolulu, HI, USA, October 23–28, 2022

3D modeling of HTS tape stacks in superconducting magnetic bearings with real thickness
Ghabeli, A.; Grilli, F.; Zhou, P.; Hänisch, J.; Fuchs, G.; et al.
2022, June. 8th International Workshop on Numerical Modeling of High Temperature Superconducters (2022), Nancy, France, June 14–16, 2022. doi:10.5281/zenodo.7190058

Estimation of the effective pumping speed for deuterium and tritium of the Linear Diffusion Pumps in the EU-DEMO torus exhaust vacuum pumping system
Teichmann, T.; Luo, X.; Giegerich, T.; Day, C.
2022. 13th International Conference on Tritium Science and Technology (Tritium 2022), Bucharest, Romania, October 16–21, 2022

Water Balance and Water Detritiation Requirements in the EU DEMO
Schwenzer, J. C.; Day, C.; Giegerich, T.
2022. 13th International Conference on Tritium Science and Technology (Tritium 2022), Bucharest, Romania, October 16–21, 2022

Plasma-driven permeation with noble gas admixtures
Kathage, Y.; Vazquez Cortes, A.; Hanke, S.; Day, C.; Giegerich, T.
2022. 13th International Conference on Tritium Science and Technology (Tritium 2022), Bucharest, Romania, October 16–21, 2022

Investigations of a Membrane-Coupled Temperature Swing Absorption Process for Hydrogen Isotope Separation in the EU-DEMO Fuel Cycle
Uihlein, A.; Giegerich, T.; Day, C.
2022. 13th International Conference on Tritium Science and Technology (Tritium 2022), Bucharest, Romania, October 16–21, 2022

Modeling of the HCPB He-CPS for EU-DEMO - Process simulations of molecular sieves & NEG sorbents
Schwenzer, J. C.; Santucci, A.; Day, C.
2022. Topical Meeting on the Technology of Fusion Energy (TOFE 2022), Anaheim, CA, USA, June 12–16, 2022

Testbed for the Pellet Launching System for JT-60SA
Ploeckl, B.; Lang, P. T.; Day, C.; Giegerich, T.; Phillips, G.; et al.
2022. 32nd Symposium on Fusion Technology (SOFT 2022), Dubrovnik, Croatia, September 18–23, 2022

Concept for a multi-purpose EU-DEMO pellet launching system
Lang, P. T.; Bosman, T.; Day, C.; Giegerich, T.; Kircher, M.; et al.
2022. 32nd Symposium on Fusion Technology (SOFT 2022), Dubrovnik, Croatia, September 18–23, 2022

HERMESplus Experimental Campaigns with Nb and V as Membrane Materials
Vazquez Cortes, A.; Kathage, Y.; Hanke, S.; Giegerich, T.; Day, C.
2022. 32nd Symposium on Fusion Technology (SOFT 2022), Dubrovnik, Croatia, September 18–23, 2022

Hydrogen Isotope Separation process development for the EU-DEMO Fuel Cycle
Uihlein, A.; Giegerich, T.; Day, C.
2022. 32nd Symposium on Fusion Technology (SOFT 2022), Dubrovnik, Croatia, September 18–23, 2022

Direct Simulation Monte Carlo of Mercury Driven Linear Diffusion Pumps for EUDEMO Torus Exhaust Pumping
Teichmann, T.; Giegerich, T.; Day, C.
2022. 32nd Symposium on Fusion Technology (SOFT 2022), Dubrovnik, Croatia, September 18–23, 2022

EU-DEMO fuel cycle performance metrics and tritium self-sufficiency criteria
Schwenzer, J. C.; Day, C.
2022. 32nd Symposium on Fusion Technology (SOFT 2022), Dubrovnik, Croatia, September 18–23, 2022

Hydrogen plasma simulation results and their experimental validation via optical emission spectroscopy
Kathage, Y.; Vazquez Cortes, A.; Giegerich, T.; Hanke, S.; Day, C.
2022. 32nd Symposium on Fusion Technology (SOFT 2022), Dubrovnik, Croatia, September 18–23, 2022

Experimental characterisation of a large NEG pump towards its application in DEMO neutral beam injectors
Hanke, S.; Day, C.; Giegerich, T.; Luo, X.; Siviero, F.; et al.
2022. 32nd Symposium on Fusion Technology (SOFT 2022), Dubrovnik, Croatia, September 18–23, 2022

Design of the JT-60SA divertor cryopumps
Day, C.; Ayllon-Gerola, J.; Davis, S.; Di Pietro, E.; Figini, L.; et al.
2022. 32nd Symposium on Fusion Technology (SOFT 2022), Dubrovnik, Croatia, September 18–23, 2022

Implementation of Test Particle Monte-Carlo codes in the Development of a Metal Foil Pump
Kathage, Y.; Luo, X.; Day, C.
2022. 32nd International Symposium on Rarefied Gas Dynamics (2022), Seoul, South Korea, July 4–8, 2022

Vortices formation in DEMO divertor during the particle exhaust
Igitkhanov, Y.; Day, C.; Varoutis, S.; Tantos, C.
2022. 25th International Conference on Plasma-Surface Interactions in Controlled Fusion Devices (2022), Online, June 13–17, 2022

Divertor power spreading in Divertor Tokamak Test facility for full power scenario with Ar and Ne seeding
Ivanova-Stanik, I.; Chmielewski, P.; Day, C.; Innocente, P.; Zagórski, R.
2022. 25th International Conference on Plasma-Surface Interactions in Controlled Fusion Devices (2022), Online, June 13–17, 2022

Out of Gas : A shortage of tritium fuel may leave fusion energy with an empty tank
Clery, D.; Day, C.
2022. Science, 376 (6600), 1372 – 1376

Thinking big in vacuum R&D
McEntee, J.; Day, C.
2022. CERN courier, 5–8

Commissioning Plan of the IFMIF-DONES Accelerator
Podadera, I.; Arranz, F.; Becerril-Jarque, S.; Bernardi, D.; Bolzon, B.; et al.
2022. 31st International Linear Accelerator Conference (LINAC 2022), Liverpool, United Kingdom, August 28–September 2, 2022

An overview of the conceptual design of the plasma-facing components of the DTT divertor
Dose, G.; Rocella, S.; Innocente, P.; Giorgetti, F.; Marzullo, D.; et al.
2022, November. 4th Technical Meeting on divertor concepts (IAEA 2022), Vienna, Austria, November 7–10, 2022

Self-consistent modeling of the interface between the divertor and the pumping system in DTT
Tantos, C.; Varoutis, S.; Day, C.
2022, October. Technical Meeting on Plasma Physics and Technology Aspects of the Tritium Fuel Cycle for Fusion Energy (IAEA 2022), Vienna, Austria, October 11–13, 2022

Actuators for plasma operation by the DEMO fuel cycle inner loops
Giegerich, T.; Igitkhanov, J.; Schwenzer, J. C.; Day, C.
2022, October. Technical Meeting on Plasma Physics and Technology Aspects of the Tritium Fuel Cycle for Fusion Energy (IAEA 2022), Vienna, Austria, October 11–13, 2022

Fuel purification requirements in a Fusion Power Plant
Igitkhanov, Y.; Giegerich, T.; Day, C.
2022, October. Technical Meeting on Plasma Physics and Technology Aspects of the Tritium Fuel Cycle for Fusion Energy (IAEA 2022), Vienna, Austria, October 11–13, 2022

Design considerations and latest architecture of the EU-DEMO fuel cycle inner loops
Giegerich, T.; Day, C.; Santucci, A.; Schwenzer, J.
2022, December 17. 13th International Conference on Tritium Science and Technology (Tritium 2022), Bucharest, Romania, October 16–21, 2022

Deterministic and stochastic modelling of particle exhaust in the sub-divertor region of W7-X
Tantos, C.; Varoutis, S.; Day, C.; Dhard, C. P.; Naujoks, D.
2022, December 15. 3rd Spanish Fusion HPC Workshop (2022), Online, December 15–16, 2022

Transient deterministic modeling of neutral gas flow in DEMO particle exhaust system
Tantos, C.; Varoutis, S.; Day, C.
2022, December 15. 3rd Spanish Fusion HPC Workshop (2022), Online, December 15–16, 2022

Real time monitoring of pellet delivery to facilitate burn control in EU-DEMO
Lang, P. T.; van Berkel, M.; Biel, W.; Bosman, T.; David, P.; et al.
2022. 48th Conference on Plasma Physics (EPS 2022), Online, June 27–July 1, 2022

Design and qualification activities of the First Divertor in the DTT
Roccella, S.; Innocente, P.; Dose, G.; Giorgettia, F.; Marzullo, D.; et al.
2022. 32nd Symposium on Fusion Technology (SOFT 2022), Dubrovnik, Croatia, September 18–23, 2022

Design of DTT vacuum vessel
Dalla Palma, M.; Barone, G.; Cucchiaro, A.; Fanelli, P.; Fulici, M.; et al.
2022. 32nd Symposium on Fusion Technology (SOFT 2022), Dubrovnik, Croatia, September 18–23, 2022

Impact of DEMO nuclear buildings air ventilation on the Exhaust Detritiation System
Santucci, A.; Cortese, G.; Narcisi, V.; Schwenzer, J. C.; Pinna, T.; et al.
2022. 32nd Symposium on Fusion Technology (SOFT 2022), Dubrovnik, Croatia, September 18–23, 2022

Predicting rarefied gas flow through surface functionalized channels
Kunze, S.; Perrier, P.; Groll, R.; Besser, B.; Varoutis, S.; et al.
2022. 32nd International Symposium on Rarefied Gas Dynamics (2022), Seoul, South Korea, July 4–8, 2022

Numerical cooling power predictions for a dilution refrigerator via kinetic modeling
Tantos, C.; Zilz, A.; Day, C.; Adam, V.; Wernsdorfer, W.
2022. 32nd International Symposium on Rarefied Gas Dynamics (2022), Seoul, South Korea, July 4–8, 2022

A Direct Simulation Monte Carlo Framework for the Simulation of Mercury Driven Diffusion Pumps for Fusion Reactor Exhaust Pumping
Teichmann, T.; Giegerich, T.; Day, C.
2022. 32nd International Symposium on Rarefied Gas Dynamics (2022), Seoul, South Korea, July 4–8, 2022

Topological impact of a simple self-replication geometric structure with great application potential in vacuum pumping and photovoltaic industry
Luo, X.; Day, C.
2022. 32nd International Symposium on Rarefied Gas Dynamics (2022), Seoul, South Korea, July 4–8, 2022

Pumping performance of metal foils
Hanke, S.; Giegerich, T.; Day, C.; Kathage, Y.; Luo, X.; et al.
2022, September 14. 22nd International Vacuum Congress (IVC 2022), Sapporo, Japan, November 9–16, 2022

Alternative structural materials and their outgassing behaviour
Battes, K.; Hanke, S.; Day, C.
2022, September 12. 22nd International Vacuum Congress (IVC 2022), Sapporo, Japan, November 9–16, 2022

Simulations of vacuum conditions in the beam pipe and around the cryogenic mirror of the Einstein Telescope
Hanke, S.; Luo, X.; Battes, K.; Day, C.
2022, September 12. 22nd International Vacuum Congress (IVC 2022), Sapporo, Japan, November 9–16, 2022

Validation of hydrogen plasma simulation using optical emission spectroscopy
Kathage, Y.; Day, C.
2022. 94th Workshop on reliable sensing and control of reactive plasmas (IUVSTA 2022), Kranjska Gora, Slovenia, May 29–June 2, 2022

Getter pump mock-up in view of application in modern Neutral Beam Injectors
Siviero, F.; Mura, M.; Busetto, B.; Maccallini, E.; Manini, P.; et al.
2022. 25th Conference of the Italian Vacuum Society (2022), Naples, Italy, May 10–12, 2022

Complete H fuel cycle with the island divertor in Wendelstein 7-X
Kremeyer, T.; Boeyaert, D.; Day, C.; Dhard, C. P.; Fend, Y.; et al.
2022, November 8. 4th Technical Meeting on divertor concepts (IAEA 2022), Vienna, Austria, November 7–10, 2022

Divertor concept development for the W7-X stellarator experiment
Naujoks, D.; Kharwandikar, A.; Haak, V.; Banduch, M.; Day, C.; et al.
2022, November 7. 4th Technical Meeting on divertor concepts (IAEA 2022), Vienna, Austria, November 7–10, 2022

Plasma fuelling on ITER and new requirements for DEMO
Lang, P. T.; Baylor, L. R.; Day, C.; Fable, E.; Giegerich, T.; et al.
2022. Technical Meeting on Plasma Physics and Technology Aspects of the Tritium Fuel Cycle for Fusion Energy (IAEA 2022), Vienna, Austria, October 11–13, 2022

Technical concepts and potential solutions for the vacuum challenges of the LF tower
Hanke, S.; Battes, K.; Day, C.; Luo, X.
2022, September 30. Gravitational Wave Detector Vacuum Workshop (GWDVac’22 2022), La Biodola, Elba, Italy, September 28–30, 2022

Vacuum system simulations for the Einstein Telescope LF section
Day, C.; Battes, K.; Hanke, S.; Luo, X.
2022, September 30. Gravitational Wave Detector Vacuum Workshop (GWDVac’22 2022), La Biodola, Elba, Italy, September 28–30, 2022

Self-Consistent Modelling of a Linear Microwave Plasma Source in a Magnetic Field
Merli, S.; Schulz, A.; Walker, M.; Kathage, Y.; Hanke, S.; et al.
2022. DPG Spring Meeting (2022), Mainz, Germany, March 28–April 1, 2022

Overview of tritium designs and developments for European DEMO
Day, C.
2022, October 16. 13th International Conference on Tritium Science and Technology (Tritium 2022), Bucharest, Romania, October 16–21, 2022

Outgassing rate studies and Monte Carlo simulations for the design of the cryogenic vacuum system of the Einstein Telescope
Battes, K.; Hanke, S.; Luo, X.; Day, C.
2022, September 5. Verhandlungen der deutschen Physikalischen Gesellschaft (DPG): Fachverband Vakuumphysik und Vakuumtechnik (2022), Regensburg, Germany, September 4–9, 2022

Experimental characterisation of a NEG pump of novel size - a major step to its application in neutral beam injectors of future fusion devices
Hanke, S.; Day, C.; Giegerich, T.; Luo, X.; Siviero, F.; et al.
2022, September 5. Verhandlungen der deutschen Physikalischen Gesellschaft (DPG): Fachverband Vakuumphysik und Vakuumtechnik (2022), Regensburg, Germany, September 4–9, 2022

Direct Simulation Monte Carlo of diffusion pumps for the application in fusion reactors
Teichmann, T.; Giegerich, T.; Day, C.
2022, September 5. Verhandlungen der deutschen Physikalischen Gesellschaft (DPG): Fachverband Vakuumphysik und Vakuumtechnik (2022), Regensburg, Germany, September 4–9, 2022

Transient modeling of the gas flows in the gas injection systems of fusion reactors
Tantos, C.; Varoutis, S.; Day, C.
2022, September 5. Verhandlungen der deutschen Physikalischen Gesellschaft (DPG): Fachverband Vakuumphysik und Vakuumtechnik (2022), Regensburg, Germany, September 4–9, 2022

EU-DEMO fuel cycle operation modelling and design
Schwenzer, J. C.
2022, October 13. Technical Meeting on Plasma Physics and Technology Aspects of the Tritium Fuel Cycle for Fusion Energy (IAEA 2022), Vienna, Austria, October 11–13, 2022

Particle exhaust and vacuum pumping on ITER and other devices
Varoutis, S.
2022, October 12. Technical Meeting on Plasma Physics and Technology Aspects of the Tritium Fuel Cycle for Fusion Energy (IAEA 2022), Vienna, Austria, October 11–13, 2022

Deuterium-Tritium fuel cycle: Overview and DEMO objectives
Day, C.
2022, October 12. Technical Meeting on Plasma Physics and Technology Aspects of the Tritium Fuel Cycle for Fusion Energy (IAEA 2022), Vienna, Austria, October 11–13, 2022

Real time monitoring of pellet delivery to facilitate burn control in EU-DEMO
Lang, P. T.; Berkel, M. van; Biel, W.; Bosman, T. O. S. J.; David, P.; et al.
2022. 48th EPS Conference on Plasma Physics, EPS 2022, Virtual, Online, 27 June 2022 - 1 July 2022, Code 185044, European Physical Society (EPS)

Monte Carlo Simulation Studies to Support an Integrated Design for the Cryogenic Vacuum Systems of the Einstein Telescope
Hanke, S.; Luo, X.; Battes, K.; Day, C.
2022. 68th AVS International Symposium and Exhibition (2022), Pittsburgh, PA, USA, November 6–11, 2022

Simulation of Mercury-Driven Diffusion Pumps for Torus Exhaust Pumping
Teichmann, T.; Giegerich, T.; Day, C.
2022. IEEE Transactions on Plasma Science, 50 (11), 4459–4464. doi:10.1109/TPS.2022.3202083

Improving CSD-Grown REBCO Thin Films by ACAC Addition to the Precursor Solution
Bühler, C.; Erbe, M.; Cayado, P.; Hänisch, J.; Holzapfel, B.
2022. The Journal of Physical Chemistry C, 126 (36), 15456–15464. doi:10.1021/acs.jpcc.2c03942

Cryogenic high voltage testing of a 25 kV RIS bushing
Fink, S.; Muller, R.; Zwecker, V.
2022. 2022 IEEE International Conference on High Voltage Engineering and Applications (ICHVE), Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/ICHVE53725.2022.9961329

Comparison of Four-Switch Buck-Boost and Dual Active Bridge Converter for DC Microgrid Applications
Ekin, Ö.; Arena, G.; Waczowicz, S.; Hagenmeyer, V.; Carne, G.
2022. 2022 IEEE 13th International Symposium on Power Electronics for Distributed Generation Systems (PEDG), 1–6, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/PEDG54999.2022.9923074

DC Grid Interface Converter based on Three-Phase Isolated Matrix Topology with Phase-Shift Modulation
Emiliani, P.; Blinov, A.; Chub, A.; Carne, G.; Vinnikov, D.
2022. 2022 IEEE 13th International Symposium on Power Electronics for Distributed Generation Systems (PEDG), 1–6, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/PEDG54999.2022.9923256

Magnetic Characterization Studies of a Superconducting Transverse Gradient Undulator for a Compact LWFA-based Free-Electron Laser. PhD dissertation
Damminsek, K.
2022, December 15. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000153441

Cryogenic testing of a 25 kV RIS bushing
Fink, S.; Fuhrmann, U.; Zwecker, V.
2022. IOP Conference Series: Materials Science and Engineering, 1240, Article no: 012148. doi:10.1088/1757-899X/1240/1/012148

Concept for a multi-purpose EU-DEMO pellet launching system
Lang, P. T.; Bosman, T.; Day, C.; Giegerich, T.; Kircher, M.; et al.
2022. Fusion Engineering and Design, 185, Art.Nr. 113333. doi:10.1016/j.fusengdes.2022.113333

Test of a DC-HTS Busbar Demonstrator for Power Distribution in Hybrid-Electric Propulsion Systems for Aircraft
Schlachter, S.; Brand, J.; Elschner, S.; Fink, S.; Holzapfel, B.; et al.
2022. IOP Conference Series: Materials Science and Engineering, 1241, Article no: 012037. doi:10.1088/1757-899X/1241/1/012037

Modelling and validation of neutral particle flow by means of stochastic algorithms using the example of a fusion divertor. PhD dissertation
Gleason González, C.
2022, November 8. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000152187

A Multi-port Smart Transformer for Green Airport Electrification
Buticchi, G.; Carne, G.; Pereira, T.; Wang, K.; Gao, X.; et al.
2022. 2022 24th European Conference on Power Electronics and Applications (EPE’22 ECCE Europe), 1–8, Institute of Electrical and Electronics Engineers (IEEE)

Cryogenic material properties of additive manufactured 316L stainless steel
Weiss, K.-P.; Hetzler, S.; Kvackaj, T.; Bidulsky, R.; Actis Grande, M.; et al.
2022. IOP Conference Series: Materials Science and Engineering, 1241 (1), Art.-Nr.: 012047. doi:10.1088/1757-899X/1241/1/012047

Verification of Puck’s criterion for CFRP laminates under multiaxial loads at ambient and cryogenic temperatures
Hohe, J.; Schober, M.; Weiss, K.-P.; Appel, S.
2022. Composites Science and Technology, 228, Article no: 109631. doi:10.1016/j.compscitech.2022.109631

Coupling electromagnetic numerical models of HTS coils to electrical circuits: multi-scale and homogeneous methodologies using the T-A formulation
Zhou, P.; Dos Santos, G.; Ghabeli, A.; Grilli, F.; Ma, G.
2022. Superconductor Science and Technology, 35 (11), Art.-Nr.: 115005. doi:10.1088/1361-6668/ac93bd

3D homogenization of the T-A formulation for the analysis of coils with complex geometries
Vargas-Llanos, C. R.; Huber, F.; Riva, N.; Zhang, M.; Grilli, F.
2022. Superconductor Science and Technology, 35 (12), 124001. doi:10.1088/1361-6668/ac9932

Operational Tritium Inventories in the EU-DEMO Fuel Cycle
Schwenzer, J. C.; Day, C.; Giegerich, T.; Santucci, A.
2022. Fusion Science and Technology, 78 (8), 664–675. doi:10.1080/15361055.2022.2101834

Development and test of a technology wind generator demonstrator with no insulation field coils applying high temperature superconductors. PhD dissertation
Schreiner, F.
2022, October 21. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000151403

New strategy for high critical current density: heavily electron doping NdFeAsO
Iida, K.; Hänisch, J.; Chen, M.; Kondo, K.; Hatano, T.; et al.
2022, December 5. International Conference on Materials Science and Engineering (Materials Oceania 2022), Gold Coast, Australia, December 5–8, 2022

Critical current density improvement in CSD-grown high-entropy REBaCuO- films
Cayado, P.; Grünewald, L.; Erbe, M.; Hänisch, J.; Gerthsen, D.; et al.
2022. RSC Advances, 12 (44), 28831–28842. doi:10.1039/d2ra03807b

Smart transformer control of the electrical grid
Carne, G.; Liserre, M.; Wald, F.
2022. Advances in Power System Modelling, Control and Stability Analysis. Ed.: F. Milano, 451–471, Institution of Engineering and Technology (IET). doi:10.1049/PBPO217E_ch13

KATRIN: status and prospects for the neutrino mass and beyond
Aker, M.; Balzer, M.; Batzler, D.; Beglarian, A.; Behrens, J.; et al.
2022. Journal of Physics G: Nuclear and Particle Physics, 49 (10), Art.Nr. 100501. doi:10.1088/1361-6471/ac834e

A statistical model for the design of rotary HTS flux pumps based on deep-learning neuron network
Wen, Z.; Zhang, H.; Tian, M.; Grilli, F.; Mueller, M.
2022. Superconductivity, 3, Artkl.Nr.: 100017. doi:10.1016/j.supcon.2022.100017

Modeling and characteristics investigation of self-regulating HTS flux pump
Zhai, Y.; Ma, G.; Deng, Y.; Sun, C.; Li, Y.; et al.
2022. Cryogenics, 124, Art.Nr. 103486. doi:10.1016/j.cryogenics.2022.103486

High temperature superconducting cables and their performance against short circuit faults: current development, challenges, solutions, and future trends
Yazdani-Asrami, M.; Seyyedbarzegar, S.; Sadeghi, A.; de Sousa, W. T. B.; Kottonau, D.
2022. Superconductor Science and Technology, 35 (8), Art.-Nr.: 083002. doi:10.1088/1361-6668/ac7ae2

Supraleitung und Kryotechnik
Kläser, M.
2022, March 11. VDI-Forum Kryotechnik - Grundlagen und Arbeitstechniken, Entwicklungsstand, -tendenzen, Anwendungen (2022), Karlsruhe, Germany, September 28–30, 2022

Status of the Engineering Design of the IFMIF-DONES High Energy Beam Transport Line and Beam Dump System
Sánchez-Herranz, D.; Arranz, F.; Cara, P.; Hauer, V.; Nomen, O.; et al.
2022. 13th International Particle Accelerator Conference (IPAC 2022), Bangkok, Thailand, June 12–17, 2022

New Constraint on the Local Relic Neutrino Background Overdensity with the First KATRIN Data Runs
KATRIN Collaboration; Aker, M.; Batzler, D.; Beglarian, A.; Behrens, J.; et al.
2022. Physical Review Letters, 129, Art.-Nr.: 011806. doi:10.1103/PhysRevLett.129.011806

Microstructure, pinning properties, and aging of CSD-grown SmBaCuO films with and without BaHfO nanoparticles
Hänisch, J.; Iida, K.; Cayado, P.; Erbe, M.; Grünewald, L.; et al.
2022. Superconductor Science and Technology, 35 (8), Art.-Nr.: 084009. doi:10.1088/1361-6668/ac7b4d

A disorder-sensitive emergent vortex phase identified in high-T superconductor (Li,Fe)OHFeSe
Li, D.; Shen, P.; Tian, J.; He, G.; Ni, S.; et al.
2022. Superconductor Science and Technology, 35 (6), Art.Nr. 064007. doi:10.1088/1361-6668/ac68a9

Electron Microscopic Investigation of Superconducting Fe- and Cu-based Thin Films. PhD dissertation
Grünewald, L.
2022, August 5. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000149357

Adaptive droop control strategy for Flywheel Energy Storage Systems: A Power Hardware-in-the-Loop validation
Karrari, S.; Carne, G.; Noe, M.
2022. Electric Power Systems Research, 212, Art.-Nr.: 108300. doi:10.1016/j.epsr.2022.108300

Improved work hardening capability and ductility of an additively manufactured and deformed Al-Mn-Mg-Sc-Zr alloy
Schliephake, D.; Lopes, C.; Eggeler, Y. M.; Chen, H.; Freudenberger, J.; et al.
2022. Journal of Alloys and Compounds, 924, Artkl.Nr.: 166499. doi:10.1016/j.jallcom.2022.166499

Experimental and theoretical study of field-dependent spin splitting at ferromagnetic insulator–superconductor interfaces
Machon, P.; Wolf, M. J.; Beckmann, D.; Belzig, W.
2022. Beilstein Journal of Nanotechnology, 13, 682–688. doi:10.3762/bjnano.13.60

Holistic fuel cycle modelling of a future fusion reactor = Holistische Modellierung des Brennstoffkreislaufs eines zukünftigen Fusionsreaktors. PhD dissertation
Hörstensmeyer, Y. N.
2022, July 21. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000148749

DEMO200 – Concept and Design of a Superconducting 200 kA DC Busbar Demonstrator for Application in an Aluminum Smelter
Elschner, S.; Brand, J.; Fietz, W. H.; Hanebeck, C.; Huwer, S.; et al.
2022. IEEE transactions on applied superconductivity, 32 (4), Art.-Nr.: 4801205. doi:10.1109/TASC.2022.3152987

Inter- to intra-layer resistivity anisotropy of NdFeAs(O,H) with various hydrogen concentrations
Chen, M. Y.; Iida, K.; Kondo, K.; Hänisch, J.; Hatano, T.; et al.
2022. doi:10.5445/IR/1000148693

Inter- to intra-layer resistivity anisotropy of NdFeAs(O,H) with various hydrogen concentrations
Chen, M. Y.; Iida, K.; Kondo, K.; Hänisch, J.; Hatano, T.; et al.
2022. Physical Review Materials, 6 (5), Art.-Nr.: 054802. doi:10.1103/PhysRevMaterials.6.054802

DSMC simulations of neutral gas flow in the DTT particle exhaust system
Tantos, C.; Varoutis, S.; Day, C.; Balbinot, L.; Innocente, P.; et al.
2022. Nuclear Fusion, 62 (2), Art.-Nr.: 026038. doi:10.1088/1741-4326/ac42f5

Test Modbus Setups
Maeva, C.
2022. doi:10.5445/IR/1000147939

Comparison of Four-Switch Buck-Boost and Dual Active Bridge Converter for DC Microgrid Applications
Ekin, Ö.; Arena, G.; Waczowicz, S.; Hagenmeyer, V.; Carne, G.
2022, June 26. 13th International Symposium on Power Electronics for Distributed Generation Systems (PEDG 2022), Kiel, Germany, June 26–29, 2022

ASSiST - A Superconducting Fault Current Limiter in a Public Electric Power Grid
Kraemer, H.; Bauer, A.; Frank, M.; van Hasselt, P.; Kummeth, P.; et al.
2022. IEEE Transactions on Power Delivery, 37 (1), 612–618. doi:10.1109/TPWRD.2021.3066845

The pre-concept design of the DEMO tritium, matter injection and vacuum systems
Day, C.; Battes, K.; Butler, B.; Davies, S.; Farina, L.; et al.
2022. Fusion Engineering and Design, 179, Art.-Nr.: 113139. doi:10.1016/j.fusengdes.2022.113139

Comparative Life Cycle Assessment of Different Cooling Systems for High-Temperature Superconducting Power Cables
Jacob, T.; Buchholz, A.; Noe, M.; Weil, M.
2022. IEEE transactions on applied superconductivity, 32 (4), Art.Nr. 4802805. doi:10.1109/TASC.2022.3168239

Improved eV-scale sterile-neutrino constraints from the second KATRIN measurement campaign
KATRIN Collaboration; Aker, M.; Batzler, D.; Beglarian, A.; Behrens, J.; et al.
2022. Physical Review D, 105 (7), Art.-Nr.: 072004. doi:10.1103/PhysRevD.105.072004

Mechanical Characterization of Low-Carbon Steels for High-Field Accelerator Magnets: Application to NbSn Low- Quadrupole MQXF
Santillana, I. A.; Vallone, G.; Anderssen, E.; Bermudez, S. I.; Bonnin, S.; et al.
2022. IEEE Transactions on Applied Superconductivity, 32 (6), Art.-Nr.: 4100507. doi:10.1109/TASC.2022.3149853

Prospective Life Cycle Assessment of High-Temperature Superconductors for Future Grid Applications. PhD dissertation
Buchholz, A.
2022. KIT Scientific Publishing. doi:10.5445/KSP/1000145972

Completion of JT-60SA construction and contribution to ITER
Kamada, Y.; Di Pietro, E.; Hanada, M.; Barabaschi, P.; Ide, S.; et al.
2022. Nuclear Fusion, 62 (4), Art.-Nr.: 042002. doi:10.1088/1741-4326/ac10e7

Plasma physics and control studies planned in JT-60SA for ITER and DEMO operations and risk mitigation
Yoshida, M.; Giruzzi, G.; Aiba, N.; Artaud, J. F.; Ayllon-Guerola, J.; et al.
2022. Plasma Physics and Controlled Fusion, 64 (5), Artkl.Nr.: 054004. doi:10.1088/1361-6587/ac57a0

Progress from ASDEX Upgrade experiments in preparing the physics basis of ITER operation and DEMO scenario development
Stroth, U.; Aguiam, D.; Alessi, E.; Angioni, C.; Arden, N.; et al.
2022. Nuclear Fusion, 62 (4), Artk.Nr.: 042006. doi:10.1088/1741-4326/ac207f

Comparing Armature Windings for a 10 MW Fully Superconducting Synchronous Wind Turbine Generator
Lengsfeld, S.; Grundmann, J.; Oomen, M.; Vargas-Llanos, C.; Ponick, B.; et al.
2022. Proceedings of 2022 12th International Conference on Power, Energy and Electrical Engineering (CPEEE): February 25-27, 2022 ; Shiga, Japan, 49–53, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/CPEEE54404.2022.9738712

2D Modeling of HTS Coils with T-A Formulation: How to Handle Different Coupling Scenarios
Santos, B. M. de O.; Santos, G. dos; Sirois, F.; Brambilla, R.; De Andrade Junior, R.; et al.
2022. doi:10.48550/arXiv.2202.02014

2D Modeling of HTS Coils with T-A Formulation: How to Handle Different Coupling Scenarios
Santos, B. M. de O.; Santos, G. dos; Sirois, F.; Brambilla, R.; De Andrade Junior, R.; et al.
2022. IEEE Transactions on Applied Superconductivity, 32 (5), Art.Nr. 5900804. doi:10.1109/TASC.2022.3160512

Thermal Resistance Between Metallic Surfaces of Copper and Stainless Steel at Different Temperatures and Applied Forces for High Current HTS Cable-in-Conduit Conductors
Bagrets, N.; Heller, R.; Weis, J. R.; Weiss, K.-P.
2022. IEEE Transactions on Applied Superconductivity, 32 (6), Art.-Nr.: 8800205. doi:10.1109/TASC.2022.3154327

Development of a CMRC cooled 10 kA current lead for HTS applications. PhD dissertation
Shabagin, E.
2022, April 8. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000144514

Electromagneto-mechanical model of high temperature superconductor insert magnets in ultra high magnetic fields
Trillaud, F.; Berrospe-Juarez, E.; Zermeño, V. M. R.; Grilli, F.
2022. Superconductor Science and Technology, 35 (5), 054002. doi:10.1088/1361-6668/ac4b9f

The T-A formulation: an efficient approach to model the macroscopic electromagnetic behaviour of HTS coated conductor applications
Huber, F.; Song, W.; Zhang, M.; Grilli, F.
2022. Superconductor Science and Technology, 35 (4), Artk.Nr.: 043003. doi:10.1088/1361-6668/ac5163

Prospective Life Cycle Assessment of High-Temperature Superconductors for Future Grid Applications. PhD dissertation
Buchholz, A.
2022, March 28. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000144205

Revealing the Role of Cross Slip for Serrated Plastic Deformation in Concentrated Solid Solutions at Cryogenic Temperatures
Tirunilai, A. S.; Weiss, K.-P.; Freudenberger, J.; Heilmaier, M.; Kauffmann, A.
2022. Metals, 12 (3), 514. doi:10.3390/met12030514

Direct neutrino-mass measurement with sub-electronvolt sensitivity
The KATRIN Collaboration; Aker, M.; Beglarian, A.; Behrens, J.; Berlev, A.; et al.
2022. Nature Physics, 18 (2), 160–166. doi:10.1038/s41567-021-01463-1

Subscale HTS Fusion Conductor Fabrication and Testing in High Magnetic Background Field
Nickel, D. S.; Bagrets, N.; Fietz, W. H.; Lange, C.; Weiss, K.-P.; et al.
2022. IEEE transactions on applied superconductivity, 32 (4). doi:10.1109/TASC.2022.3151581

Reel-to-reel fabrication of HTS CroCo Strands and Test of HTS CroCo Demonstrator Coils
Heiduk, M.; Wolf, M. J.; Fietz, W. H.
2022. IEEE Transactions on Applied Superconductivity, 32 (4), Art.-Nr.: 4800805. doi:10.1109/TASC.2022.3152985

200 kA DC Busbar Demonstrator DEMO 200 – Conceptual Design of Superconducting 20 kA Busbar Modules Made of HTS CroCo Strands
Wolf, M. J.; Fietz, W. H.; Heiduk, M.; Huwer, S.; Kienzler, A.; et al.
2022. IEEE transactions on applied superconductivity, 32 (4), 1–5. doi:10.1109/TASC.2022.3152130

Some results of the EC project FASTGRID
Tixador, P. J.; Akbar, A.; Bauer, M.; Bocchi, M.; Calleja, A.; et al.
2022. IEEE Transactions on Applied Superconductivity, 32 (4), Art.Nr. 5601006. doi:10.1109/TASC.2022.3151318

A 3D Finite Element Method Approach for Analyzing Different Short Circuit Types in a Saturated Iron Core Fault Current Limiter
Santos, G. D.; Martins, F. G.; Sass, F.; Sotelo, G. G.; Morandi, A.; et al.
2022. IEEE Transactions on Applied Superconductivity, 32 (3), Art.Nr. 5600713. doi:10.1109/TASC.2022.3142047

The DEMO magnet system – Status and future challenges
Corato, V.; Vorpahl, C.; Sedlak, K.; Anvar, V. A.; Bennet, J.; et al.
2022. Fusion Engineering and Design, 174, Art.-Nr.: 112971. doi:10.1016/j.fusengdes.2021.112971

Design and feasibility of a pumping concept based on tritium direct recycling
Haertl, T.; Day, C.; Giegerich, T.; Hanke, S.; Hauer, V.; et al.
2022. Fusion Engineering and Design, 174, Art.-Nr.: 112969. doi:10.1016/j.fusengdes.2021.112969

AC Losses in High-Temperature Superconductor Tapes and Cables for Power Applications. PhD dissertation
Godfrin, A.
2022. KIT Scientific Publishing. doi:10.5445/KSP/1000131627

Fluorescent thermal imaging method for investigating transient effects in high-temperature superconductor tapes and coils. PhD dissertation
Gyuráki, R.
2022. KIT Scientific Publishing. doi:10.5445/KSP/1000125489

Entwicklung von Modellen zur speichergestützten Versorgung mit regenerativen Energien in Inselnetzen. PhD dissertation
Itschner, H.
2022. KIT Scientific Publishing. doi:10.5445/KSP/1000122913

A SOC-feedback Control Scheme for Fast Frequency Support with Hybrid Battery/Supercapacitor Storage System
Bruno, S.; Carne, G.; Iurlaro, C.; Rodio, C.; Specchio, M.
2021. 2021 6th IEEE Workshop on the Electronic Grid (eGRID), 1–8, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/eGRID52793.2021.9662149

Validating Inertia Emulation Controllers using Rapid Control Prototyping and PHIL Testing
Karrari, S.
2021, September 17. 13th OPAL-RT’s real-time simulation conference (RT 2021), Online, September 16–17, 2021

Enhanced Current-Type P-HIL Interface Algorithm for Smart Transformers Testing
Pugliese, S.; Liserre, M.; Carne, G. D.
2021. IEEE Energy Conversion Congress and Exposition (ECCE), 10-14 Oct. 2021, Vancouver, BC, Canada, 1171–1178, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/ECCE47101.2021.9595273

Unified Cost Function Model Predictive Control for a three-stage Smart Transformer
Tarisciotti, L.; Buticchi, G.; Carne, G. D.; Yang, J.; Gu, C.; et al.
2021. IEEE Energy Conversion Congress and Exposition (ECCE), Vancouver, BC, Canada, 10-14 Oct. 2021, 3468–3475, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/ECCE47101.2021.9595809

15 min DC breakdown tests with pressurized liquid nitrogen
Fink, S.; Zwecker, V.
2021. doi:10.5445/IR/1000129780

Integration of Flywheel Energy Storage Systems in Low Voltage Distribution Grids. PhD dissertation
Karrari, S.
2021, July 13. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000135181

Magnetohydrodynamic Enhanced Entry System for Space Transportation (MEESST) as a Key Building Block for Future Exploration Missions
La Rosa Betancourt, M.; Collier-Wright, M.; Bögel, E.; Martin Lozano, J.; Lani, A.; et al.
2021. Journal of the British Interplanetary Society, 74 (12), 448–453

Ohne Widerstand in die Anwendung – Supraleitende Hochstromkabel und Leitungen
Noe, M.; Bauer, M.
2021. Physik in unserer Zeit, 52 (6), 290–297. doi:10.1002/piuz.202101615

Magnetic Confinement Fusion—Reactor Blanket Technologies
Boccaccini, L. V.; Day, C.
2021. Encyclopedia of Nuclear Enerspangy. Ed.: E. Greenspan, 620–634, Elsevier. doi:10.1016/B978-0-12-819725-7.00205-1

Analysis of Superconducting Thin Films in a Modern FIB/SEM Dual-Beam Instrument
Grünewald, L.; Nerz, D.; Langer, M.; Meyer, S.; Beisig, N.; et al.
2021, August 25. Microscopy Conference (MC 2021), Online, August 22–26, 2021

Untersuchung von Instrumenten und Maßnahmen zur Erschließung des aus Klimaschutzsicht zusätzlich erforderlichen Erneuerbaren-Energien-Ausbaus : Klimagerechter EE-Ausbau. Abschlussbericht
Bauknecht, D.; Ritter, D.; Palacios, S.; Heinemann, C.; Vogel, M.; et al.
2021. Umweltbundesamt (UBA)

Förderprogramm für Bürgerenergiegesellschaften in der Vorentwicklungsphase
Palacios, S.; Bauknecht, D.; Kahles, M.
2021. Umweltbundesamt (UBA)

Structural and chemical properties of superconducting rare-earth barium copper oxide/BaHfO3 nanocomposites with rare-earth mixtures
Grünewald, L.; Cayado, P.; Hänisch, J.; Holzapfel, B.; Gerthsen, D.
2021. Microscopy and Microanalysis, 27 (S1), 2876–2879. doi:10.1017/S1431927621010023

Electron Microscopic Investigation of Post-Annealed Superconducting GdBaCuO Thin Films on MgO
Grünewald, L.; Popov, R.; Hänisch, J.; Holzapfel, B.; Gerthsen, D.
2021, August 23. Microscopy Conference (MC 2021), Online, August 22–26, 2021

The beamline for the ITER heating neutral beam injectors: A case study for development and procurement of high heat flux components
Dalla Palma, M.; Pasqualotto, R.; Sartori, E.; Tinti, P.; Zaccaria, P.; et al.
2021. Fusion engineering and design, 171, Art. Nr.: 112559. doi:10.1016/j.fusengdes.2021.112559

Technological exploitation of the JET neutron environment: progress in ITER materials irradiation and nuclear analysis
JET Contributors; Packer, L. W.; Batistoni, P.; Bekris, N.; Bradnam, S. C.; et al.
2021. Nuclear fusion, 61 (11), Art.-Nr. 116057. doi:10.1088/1741-4326/ac2a6b

Superconducting imprint of magnetic textures in ferromagnets with perpendicular magnetic anisotropy
Sander, A.; Orfila, G.; Sanchez-Manzano, D.; Reyren, N.; Mawass, M. A.; et al.
2021. Scientific reports, 11 (1), Article no: 20788. doi:10.1038/s41598-021-99963-w

Analysis of superconducting thin films in a modern FIB/SEM dual-beam instrument
Grünewald, L.; Nerz, D.; Langer, M.; Meyer, S.; Beisig, N.; et al.
2021. Microscopy and microanalysis, 27 (S1), 1056–1058. doi:10.1017/S1431927621003986

Recent developments of the HTS CroCo for future energy applications
Wolf, M. J.; Arndt, T.; Bagrets, N.; Fietz, W. H.; Heiduk, M.; et al.
2021, December. 34th International Symposium on Superconductivity (ISS 2021), Online, November 30–December 2, 2021

200 kA DC Busbar Demonstrator DEMO200 – Development of Superconducting 20 kA Busbar Modules made of HTS CroCo Strands
Wolf, M. J.; Fietz, W. H.; Heiduk, M.; Huwer, S.; Kienzler, A.; et al.
2021, September. 15th European Conference on Applied Superconductivity (EUCAS 2021), Online, September 5–9, 2021

Test of a demonstrator coil made from HTS CroCo strand
EUROfusion Consortium; Heiduk, M.; Wolf, M. J.; Fietz, W. H.
2021, September. 15th European Conference on Applied Superconductivity (EUCAS 2021), Online, September 5–9, 2021

High Temperature Superconductors for Fusion Applications
EUROfusion Consortium; Fietz, W. H.; Heller, R.; Nickel, D.; Bagrets, N.; et al.
2021, December 1. 29th European Fusion Programme Workshop (EFPW 2021), Online, November 30–December 2, 2021

Friction factor of a forced-flow cooled HTS subsize-conductor for fusion magnets
Dembkowska, A.; Lewandowska, M.; Ortwein, R.; Herbin, P.; Wolf, M.
2021, September 20. CHATS on Applied Superconductivity (2021), Online, September 20–24, 2021

High temperature superconductors for fusion applications and new developments for the HTS CroCo conductor design
EUROfusion Consortium; Wolf, M. J.; Ebner, C.; Fietz, W. H.; Heller, R.; et al.
2021. Fusion engineering and design, 172, Art.-Nr.: 112739. doi:10.1016/j.fusengdes.2021.112739

All-chemical YBaCuO coated conductors with preformed BaHfO and BaZrO nanocrystals on Ni5W technical substrate at the industrial scale
Díez-Sierra, J.; Rijckaert, H.; Rikel, M.; Hänisch, J.; Sadewasser, M.; et al.
2021. Superconductor science and technology, 34 (11), 114001. doi:10.1088/1361-6668/ac2495

Determination of the Oxygen Chain Ordering in REBaCuOby Electrical Conductivity Relaxation Measurements
Cayado, P.; Hauck, D.; Barthlott, D.; Erbe, M.; Hänisch, J.; et al.
2021. ACS Applied Electronic Materials, 8 (12), 5374–5382. doi:10.1021/acsaelm.1c00861

An electromagnetic design of a fully superconducting generator for wind application
Liu, Y.; Grilli, F.; Cao, J.; Li, L.; Zhang, C.; et al.
2021. Energies, 14 (22), 7811. doi:10.3390/en14227811

Design and manufacturing of a KIT sample for a Quench Experiment on HTS Cable in Conduit Conductors
EUROfusion Consortium; Nickel, D. S.; Wolf, M. J.; Weiss, K.-P.; Vogel, T.; et al.
2021, November 16. 27th International Conference on Magnet Technology (MT 2021), Fukuoka, Japan, November 15–19, 2021

Subscale HTS fusion conductor fabrication and testing in high magnetic background field
EUROfusion Consortium; Nickel, D. S.; Bagrets, N.; Fietz, W. H.; Lange, C.; et al.
2021, September 5. 15th European Conference on Applied Superconductivity (EUCAS 2021), Online, September 5–9, 2021

AURORA: A public applications server to introduce students to superconductivity
Riva, N.; Grilli, F.; Dutoit, B.
2021. 7th edition of the International Workshop on Numerical Modelling of High Temperature Superconductors, 22-23 June 2021, Virtual (Nancy, France). Ed.: K. Berger, 012005. doi:10.1088/1742-6596/2043/1/012005

GPU acceleration of DEMO particle exhaust simulations
Varoutis, S.; Tantos, C.; Day, C.
2021. Plasma physics and controlled fusion, 63 (10), Art.-Nr. 104001. doi:10.1088/1361-6587/ac172b

A wide range E − J constitutive law for simulating REBCO tapes above their critical current
Riva, N.; Sirois, F.; Lacroix, C.; Pellerin, F.; Giguere, J.; et al.
2021. Superconductor science and technology, 34 (11), 115014. doi:10.1088/1361-6668/ac2883

Overview and first operation of the high temperature superconductor current leads during integrated commissioning of JT-60SA
EUROfusion Consortium; Heller, R.; Fietz, W. H.; Hamada, K.; Murakami, H.; et al.
2021. Fusion Engineering and Design, 172, Art.-Nr.: 112910. doi:10.1016/j.fusengdes.2021.112910

Techno-economic assessment of LIQuid HYdrogen & Super conducting Magnetic Energy Storage LIQHYSMES
Hajek, M.; Baumann, M.; Neumann, H.; Weil, M.
2021. CA19108 - High-Temperature SuperConductivity for AcceLerating the Energy Transition Hybrid meeting WG 4: Economic and sustainability assessment (2021), Universität Bologna, Italien, September 15, 2021

Optimized Shape of Short-Circuited HTS Coils by Cutting Process for Superconducting Fault Current Limiters
Oliveira, R. A. H. de; Murta Pina, J.; Batista de Sousa, W. T.; Nast, R.; Pronto, A. G.; et al.
2021. IEEE Transactions on Applied Superconductivity, 31 (9), Art.Nr. 5605009. doi:10.1109/TASC.2021.3118920

Cryogenic vacuum considerations for future gravitational wave detectors
Spallino, L.; Angelucci, M.; Pasqualetti, A.; Battes. Katharina; Day, C.; et al.
2021. Physical review / D, 104 (6), Art.-Nr.: 062001. doi:10.1103/PhysRevD.104.062001

Impact of plasma-wall interaction and exhaust on the EU-DEMO design
Maviglia, F.; Siccinio, M.; Bachmann, C.; Biel, W.; Cavedon, M.; et al.
2021. Nuclear materials and energy, 26, Art.-Nr. 100897. doi:10.1016/j.nme.2020.100897

Model validation of a high-speed flywheel energy storage system using power hardware-in-the-loop testing
Karrari, S.; Carne, G.; Noe, M.
2021. Journal of energy storage, 43, Art.-Nr.: 103177. doi:10.1016/j.est.2021.103177

Corrigendum: A new benchmark problem for electromagnetic modelling of superconductors: the high-T superconducting dynamo (2020 Supercond. Sci. Technol. 33 105009)
Ainslie, M.; Grilli, F.; Quéval, L.; Pardo, E.; Perez-Mendez, F.; et al.
2021. Superconductor science and technology, 34 (2), Art.: 029502. doi:10.1088/1361-6668/abd522

New coil configurations with 2G-HTS and benefits for applications
Arndt, T.; Holzapfel, B.; Noe, M.; Nast, R.; Hornung, F.; et al.
2021. Superconductor Science and Technology, 34 (9), Art.-Nr.: 095006. doi:10.1088/1361-6668/ac19f4

Nanoscale Texture and Microstructure in a NdFeAs(O,F)/IBAD-MgO Superconducting Thin Film with Superior Critical Current Properties
Guo, Z.; Gao, H.; Kondo, K.; Hatano, T.; Iida, K.; et al.
2021. ACS applied electronic materials, 3 (7), 3158–3166. doi:10.1021/acsaelm.1c00364

Topological impact of a simple self-replication geometric structure with great application potential in vacuum pumping and photovoltaic industry
Luo, X.; Day, C.
2021. Journal of vacuum science & technology / B, 39 (5), Art.-Nr.: 054203. doi:10.1116/6.0001222

Influence of Coil Position on AC Losses of Stator Superconducting Windings of a Synchronous Machine for a 10 MW Wind Turbine
Vargas-Llanos, C. R.; Lengsfeld, S.; Noe, M.; Arndt, T.; Grilli, F.
2021. IEEE Transactions on Applied Superconductivity, 31 (7), Art. Nr.: 5206509. doi:10.1109/TASC.2021.3104983

Screening current rotation effects: SCIF and strain in REBCO magnets
Kolb-Bond, D.; Bird, M.; Dixon, I. R.; Painter, T.; Lu, J.; et al.
2021. Superconductor Science and Technology, 34 (9), 095004. doi:10.1088/1361-6668/ac1525

Current transfer length and interfacial resistance between superconductors and metals in commercial REBCO tapes and cables
Bagrets, N.; Nast, R.; Fournier-Lupien, J.-H.; Sirois, F.; Celentano, G.; et al.
2021. IEEE Transactions on Applied Superconductivity, 31 (6), Art.Nr. 9447404. doi:10.1109/TASC.2021.3085359

The design, construction, and commissioning of the KATRIN experiment
KATRIN Collaboration; Aker, M.; Altenmüller, K.; Amsbaugh, J. F.; Arenz, M.; et al.
2021. (Minter (née Bodine), L.I. & Schaller (née Pollithy), A., Eds.) Journal of Instrumentation, 16 (08), Art.-Nr.: T08015. doi:10.1088/1748-0221/16/08/T08015

AC loss calculation in high-temperature superconductor wires and windings with analytical and numerical models: Influence of J(B) dependence
Grilli, F.; Abraham, S.; Brambilla, R.
2021. 33rd International Symposium on Superconductivity (ISS2020), 1-3 December 2020, Tsukuba, Japan, Art.-Nr.: 012038, Institute of Physics Publishing Ltd (IOP Publishing Ltd). doi:10.1088/1742-6596/1975/1/012038

Supraleitung und Kryotechnik
Marion Kläser
2021, September 24. 50. VDI-Forum Kryotechnik - Grundlagen und Arbeitstechniken, Entwicklungsstand, -tendenzen, Anwendungen (2021), Karlsruhe, Germany, September 22–24, 2021

Concepts of static vs. dynamic current transfer length in 2G HTS coated conductors with a current flow diverter architecture
Fournier-Lupien, J.-H.; Sirois, F.; Lacroix, C.
2021

Concepts of static vs. dynamic current transfer length in 2G HTS coated conductors with a current flow diverter architecture
Fournier-Lupien, J.-H.; Sirois, F.; Lacroix, C.
2021. Superconductor science and technology, 34 (8), Art.-Nr.: 085001. doi:10.1088/1361-6668/abf985

Wirtschaftlichkeit und Systemintegration von supraleitenden 380 kV Höchstspannungskabeln [Economic efficiency and system integration of superconducting 380 kV extra high voltage cables]
Noe, M.; Kottonau, D.
2021. Automatisierungstechnik, 69 (5), 401–408. doi:10.1515/auto-2021-0017

Nanoscale crystal orientation analysis of highly textured NdFeAs(O,F) films for high-field magnet application
Guo, Z.; Gao, H.; Kondo, K.; Hatano, T.; Iida, K.; et al.
2021, December 13. 31 Annual Meeting of MRS-J - Enhancing Materials Innovation in the Coronavirus Era : Material DX and Process Innovation (2021), Yokohama, Japan, December 13–15, 2021

Microstructural Characterization of NdFeAs(O,F) Epitaxial Thin Films on IBAD-MgO with Superior Critical Current Properties
Guo, Z.; Gao, H.; Kondo, K.; Hatano, T.; Iida, K.; et al.
2021, September 6. 15th European Conference on Applied Superconductivity (EUCAS 2021), Online, September 5–9, 2021

Unravelling the crystallization process in CSD-grown REBa2Cu3O7-δ films via definitive screening design approach
Cayado, P.; Rijckaert, H.; Hayasaka, R.; Erbe, M.; Itol, S.; et al.
2021, September 6. 15th European Conference on Applied Superconductivity (EUCAS 2021), Online, September 5–9, 2021

Growth, microstructure and pinning properties of CSD REBCO films and nanocomposites
Hänisch, J.
2021, July 19. 23rd Joint Cryogenic Engineering Conference and International Cryogenic Materials Conference (CEC/ICMC 2021), Online, July 19–23, 2021

High-Temperature Superconductors
Hänisch, J.; Wimbush, S.
2021. CRC Handbook of Chemistry and Physics. Ed.: J. Rumble, section 12–16, CRC Press

Particle Simulation of Linear Diffusion Pumps for DEMO Torus Exhaust Pumping
Teichmann, T.; Day, C.
2021. Fusion Engineering and Design, 169, Art.-Nr.: 112694. doi:10.1016/j.fusengdes.2021.112694

Heat transfer in binary polyatomic gas mixtures over the whole range of the gas rarefaction based on kinetic deterministic modeling
Tantos, C.; Varoutis, S.; Day, C.
2021. Physics of fluids, 33 (2), Art.-Nr.: 022004. doi:10.1063/5.0033938

Design and Analysis of 10 MW HTS Double-Stator Flux-Modulation Generator for Wind Turbine
Cheng, Y.; Zhang, Y.; Qu, R.; Li, D.; Liu, Y.; et al.
2021. IEEE transactions on applied superconductivity, 31 (5), Art. Nr.: 9362333. doi:10.1109/TASC.2021.3061928

Superconductors for power applications: An executable and web application to learn about resistive fault current limiters
Riva, N.; Grilli, F.; Dutoit, B.
2021. European Journal of Physics, 42 (4), Art.-Nr.: 045802. doi:10.1088/1361-6404/abf0da

Matter Injection in EU-DEMO: The Preconceptual Design
Ploeckl, B.; Lang, P. T.; Frattolillo, A.; Igitkhanov, Y.; Pégourié, B.; et al.
2021. Fusion Science and Technology, 77 (4), 266–278. doi:10.1080/15361055.2021.1903784

Achievement of 26.5 T at 1.8 K and 24.0 T at 4.4 K in a Free Bore of 68 mm Diameter: Successful Commissioning of the HOMER II LTS/HTS High Field Facility Upgrade
Hornung, F.; Decker, M.; Eisele, M.; Gretschmann, F.; Heinrich, P.; et al.
2021. IEEE Transactions on Applied Superconductivity, 31 (6), Art.-Nr.: 4300405. doi:10.1109/TASC.2021.3080077

Effect of cryogenic environments on failure of carbon fiber reinforced composites
Hohe, J.; Schober, M.; Fliegener, S.; Weiss, K.-P.; Appel, S.
2021. Composites Science and Technology, 212, Art.-Nr.: 108850. doi:10.1016/j.compscitech.2021.108850

Analytical approach to predict the particle exhausts for arbitrary DEMO divertor configurations
Igitkhanov, Y.; Day, C.; Varoutis, S.; Tantos, C.
2021. Fusion Engineering and Design, 168, Art.-Nr.: 112657. doi:10.1016/j.fusengdes.2021.112657

Impact of bending on critical current of HTS CrossConductors
EUROfusion Consortium; Nickel, D. S.; Fietz, W. H.; Weiss, K.-P.; Wolf, M. J.
2021. IEEE transactions on applied superconductivity, 31 (5), Art. Nr.: 9419716. doi:10.1109/TASC.2021.3076491

Investigation of AC loss of superconducting field coils in a double-stator superconducting flux modulation generator by using T-A formulation based finite element method
Liu, Y.; Ou, J.; Cheng, Y.; Schreiner, F.; Zhang, Y.; et al.
2021. Superconductor Science and Technology, 34 (5), Art.-Nr.: 055009. doi:10.1088/1361-6668/abef7e

Dynamic modelling of incidents for the protection of helium cryostats against excessive pressure. PhD dissertation
Weber, C.
2021, May 10. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000132285

Efficient modeling of high temperature superconductors surrounded by magnetic components using a reduced H-phi formulation
Arsenault, A.; Sirois, F.; Grilli, F.
2021. IEEE Transactions on Applied Superconductivity, 31 (4), Art.Nr. 6800609. doi:10.1109/TASC.2021.3073274

Systematic study of the outgassing behavior of different ceramic materials
Battes, K.; Day, C.; Hauer, V.
2021. Journal of Vacuum Science and Technology B: Nanotechnology and Microelectronics, 39 (3), Art.-Nr.: 034202. doi:10.1116/6.0000954

Alternating Current Loss of Superconductors Applied to Superconducting Electrical Machines
Zhang, H.; Wen, Z.; Grilli, F.; Gyftakis, K.; Mueller, M.
2021. Energies, 14 (8), Article no: 2234. doi:10.3390/en14082234

Correction to: Effect of the internal degrees of freedom of the gas molecules on the heat and mass transfer in long circular capillaries
Tantos, C.; Varoutis, S.; Day, C.
2021. Microfluidics and nanofluidics, 25 (4), Art. Nr.: 38. doi:10.1007/s10404-021-02438-7

Environmental Life Cycle Assessment of a 10 kV High-Temperature Superconductor Cable System for Energy Distribution
Buchholz, A.; Noe, M.; Kottonau, D.; Shabagin, E.; Weil, M.
2021. IEEE Transactions on Applied Superconductivity, 31 (5), Art.Nr. 4802405. doi:10.1109/TASC.2021.3070703

Numerical Modeling of AC Loss in HTS Coated Conductors and Roebel Cable Using T-A Formulation and Comparison with H Formulation
Yan, Y.; Qu, T.; Grilli, F.
2021. IEEE Access, 9, 49649–49659. doi:10.1109/ACCESS.2021.3067037

Optimization Method for Extracting Stabilizer Geometry and Properties of REBCO Tapes
Riva, N.; Grilli, F.; Sirois, F.; Lacroix, C.; Akbar, A.; et al.
2021. IEEE Transactions on Applied Superconductivity, 31 (5), Art.Nr. 9366897. doi:10.1109/TASC.2021.3063079

Investigation of a six pole stator system using no-insulation 2nd generation high temperature superconductor for a 10 kW generator demonstrator
Schreiner, F.; Liu, Y.; Noe, M.
2021. IEEE Transactions on Applied Superconductivity, 31 (5), Art.Nr. 5202405. doi:10.1109/TASC.2021.3064513

Unravelling the Crystallization Process in Solution-Derived YBaCuO Nanocomposite Films with Preformed ZrO Nanocrystals via Definitive Screening Design
Rijckaert, H.; Cayado, P.; Hänisch, J.; Billet, J.; Erbe, M.; et al.
2021. The journal of physical chemistry letters, 12 (8), 2118–2125. doi:10.1021/acs.jpclett.1c00135

High J and low anisotropy of hydrogen doped NdFeAsO superconducting thin film
Iida, K.; Hänisch, J.; Kondo, K.; Chen, M.; Hatano, T.; et al.
2021. Scientific Reports, 11 (1), Art.-Nr.: 5636. doi:10.1038/s41598-021-85216-3

AC Losses in High-Temperature Superconductor Tapes and Cables for Power Applications. PhD dissertation
Godfrin, A.
2021, March 23. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000130584

Advanced electromagnetic modeling of large-scale high-temperature superconductor systems based on H and T-A formulations
Berrospe-Juarez, E.; Trillaud, F.; Zermeño, V. M. R.; Grilli, F.
2021. Superconductor science and technology, 34 (4), Art. Nr.: 044002. doi:10.1088/1361-6668/abde87

Robustness of ZAO based NEG pump solutions for fusion applications
Siviero, F.; Caruso, L.; Mura, M.; Maccallini, E.; Manini, P.; et al.
2021. Fusion Engineering and Design, 166, Art.-Nr.: 112306. doi:10.1016/j.fusengdes.2021.112306

Current Redistribution in a Superconducting Multi-Strand 35 kA DC Cable Demonstrator
Wolf, M. J.; Fietz, W. H.; Heiduk, M.; Lange, C.; Weiss, K.-P.
2021. IEEE transactions on applied superconductivity, 31 (5), Art. Nr.: 9366794. doi:10.1109/TASC.2021.3063071

Voltage-Dependent Load Levelling Approach by means of Electric Vehicle Fast Charging Stations
Gao, X.; Carne, G.; Andresen, M.; Bruske, S.; Pugliese, S.; et al.
2021. IEEE transactions on transportation electrification, 7 (3), 1099–1111. doi:10.1109/TTE.2021.3059790

Study of contact resistivity of a no-insulation superconducting coil
Liu, Y.; Ou, J.; Gyuraki, R.; Schreiner, F.; Sousa, W. T. B. de; et al.
2021. Superconductor science and technology, 34 (3), 035009. doi:10.1088/1361-6668/abd14d

Preliminary analysis of alternative divertors for DEMO
Militello, F.; Aho-Mantila, L.; Ambrosino, R.; Body, T.; Bufferand, H.; et al.
2021. Nuclear materials and energy, 26, Art.-Nr.: 100908. doi:10.1016/j.nme.2021.100908

An overview of grid-edge control with the digital transformation
Mai, T. T.; Nguyen, P. H.; Tran, Q.-T.; Cagnano, A.; Carne, G.; et al.
2021. Electrical engineering, 103, 1989–2007. doi:10.1007/s00202-020-01209-x

Synchronization of Low Voltage Grids Fed by Smart and Conventional Transformers
Giacomuzzi, S.; Carne, G.; Pugliese, S.; Buja, G.; Liserre, M.; et al.
2021. IEEE transactions on smart grid, 12 (4), 2941–2951. doi:10.1109/TSG.2021.3054478

Design of superconducting AC machines for hybrid-electric aircraft. PhD dissertation
Corduan, M.
2021, February 8. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000129218

Injection of high-speed solid D2 pellets using a “Direct-Line-of-Sight” (DLS) guide tube
Frattolillo, A.; Baylor, L. R.; Day, C.; Gebhart, T. E.; Lang, P. T.; et al.
2021. Fusion engineering and design, 162, Art.-Nr.: 112138. doi:10.1016/j.fusengdes.2020.112138

Influence of Temperature and Plastic Strain on Deformation Mechanisms and Kink Band Formation in Homogenized HfNbTaTiZr
Chen, H.; Hanemann, T.; Seils, S.; Schliephake, D.; Tirunilai, A. S.; et al.
2021. Crystals, 11 (2), 81. doi:10.3390/cryst11020081

Performance of fiber reinforced materials under cryogenic conditions—A review
Hohe, J.; Neubrand, A.; Fliegener, S.; Beckmann, C.; Schober, M.; et al.
2021. Composites / A, 141, Art.-Nr.: 106226. doi:10.1016/j.compositesa.2020.106226

Calculating the full-range dynamic loss of HTS wires in an instant
Grilli, F.
2021. Superconductor science and technology, 34 (2), Art.-Nr.: 020501. doi:10.1088/1361-6668/abc7f6

Physics and technology considerations for the deuterium-tritium fuel cycle and conditions for tritium fuel self sufficiency
Abdou, M.; Riva, M.; Ying, A.; Day, C.; Loarte, A.; et al.
2021. Nuclear fusion, 61 (1), Art. Nr.: 013001. doi:10.1088/1741-4326/abbf35

LaMnO buffer layers on inclined substrate deposited MgO templates for coated conductors
Troshyn, O.; Hoffmann, C.; Große, V.; Hänisch, J.; Becker, L.; et al.
2021. Superconductor science and technology, 34 (3), Art.-Nr.: 035006. doi:10.1088/1361-6668/abd5f2

Introduction of quasi-multilayer pulsed laser deposition for enhanced superconducting properties of Ba(FeCo)As thin films. PhD dissertation
Meyer, S.
2021, January 19. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000127915

Neutral tritium gas reduction in the KATRIN differential pumping sections
KATRIN Collaboration; Marsteller, A.; Bornschein, B.; Bornschein, L.; Drexlin, G.; et al.
2021. Vacuum, 184, Art.-Nr.: 109979. doi:10.1016/j.vacuum.2020.109979

Pinning analyses of a BaHfO3-containing GdBa2Cu3O7-d thin film grown by chemical solution deposition
Iida, K.; Cayado, P.; Rijckaert, H.; Erbe, M.; Hänisch, J.; et al.
2021. Superconductor science and technology, 34 (1), 015009. doi:10.1088/1361-6668/abb205

An open-source 2D finite difference based transient electro-thermal simulation model for three-phase concentric superconducting power cables
Batista de Sousa, W. T.; Shabagin, E.; Kottonau, D.; Noe, M.
2021. Superconductor science and technology, 34 (1), Art.Nr. 015014. doi:10.1088/1361-6668/abc2b0

Structural and chemical properties of superconducting Co-doped BaFeAs thin films grown on CaF
Grünewald, L.; Langer, M.; Meyer, S.; Nerz, D.; Hänisch, J.; et al.
2021. Superconductor science and technology, 34 (3), Art.Nr. 035005. doi:10.1088/1361-6668/abcecf

Analysis of AC loss contributions from different layers of HTS tapes using the A − V formulation model
Musso, A.; Breschi, M.; Ribani, P. L.; Grilli, F.
2021. IEEE transactions on applied superconductivity, 31 (2), Art.Nr. 9239899. doi:10.1109/TASC.2020.3033587

Implementation of the H- Formulation in COMSOL Multiphysics for Simulating the Magnetization of Bulk Superconductors and Comparison With the H-Formulation
Arsenault, A.; Sirois, F.; Grilli, F.
2021. IEEE transactions on applied superconductivity, 31 (2), 1–11. doi:10.1109/TASC.2020.3033998

Deployment of a Resistive Superconducting Fault Current Limiter for Improvement of Voltage Quality and Transient Recovery Voltage
De Sousa, W. T. B.; Kottonau, D.; Karrari, S.; Geisbusch, J.; Noe, M.
2021. IEEE transactions on applied superconductivity, 31 (1). doi:10.1109/TASC.2020.3016460

Tensile properties and deformation behavior of ferrite and austenite duplex stainless steel at cryogenic temperatures
Koga, N.; Nameki, T.; Umezawa, O.; Tschan, V.; Weiss, K.-P.
2021. Materials science and engineering / A, 801, Art.-Nr.: 140442. doi:10.1016/j.msea.2020.140442

Microstructural and Chemical Constitution of the Oxide Scale formed on a Pesting-Resistant Mo-Si-Ti Alloy
Obert, S.; Kauffmann, A.; Seils, S.; Boll, T.; Kauffmann-Weiss, S.; et al.
2021. Corrosion science, 178, Art.-Nr. 109081. doi:10.1016/j.corsci.2020.109081

Validation of Puck’s failure criterion for CFRP composites in the cryogenic regime
Hohe, J.; Schober, M.; Weiss, K.-P.; Appel, S.
2021. CEAS space journal, 13, 145–153. doi:10.1007/s12567-020-00335-3

Extended Operation Range of Photovoltaic Inverters by Current Waveform Shaping
Bruske, S.; Carne, G.; Buticchi, G.; Liserre, M.; Zhang, H.
2021. IEEE transactions on power electronics, 36 (2), 1693–1707. doi:10.1109/TPEL.2020.3006334

Impact of smart transformer voltage and frequency support in a high renewable penetration system
Chen, J.; Liu, M.; Carne, G.; Zhu, R.; Liserre, M.; et al.
2021. Electric power systems research, 190, 106836. doi:10.1016/j.epsr.2020.106836

Development of high-temperature superconductor cables for high direct current applications. PhD dissertation
Preuß, A.
2021, December 14. KIT Scientific Publishing. doi:10.5445/KSP/1000122861

Primary Frequency Regulation Using HVDC Terminals Controlling Voltage Dependent Loads
Langwasser, M.; Carne, G.; Liserre, M.; Biskoping, M.
2021. IEEE transactions on power delivery, 36 (2), 710–720. doi:10.1109/TPWRD.2020.2990565

High Temperature Superconductors for Fusion Applications
Wolf, M. J.; Fietz, W. H.; Heller, R.; Nickel, D.; Weiss, K.-P.
2020, September 25. 31st Symposium on Fusion Technology (SOFT 2020), Online, September 20–25, 2020

Development of a Hydrogen-Selective Vacuum Pump on the Basis of Superpermeation = Entwicklung einer auf Superpermeation basierenden, wasserstoffselektiven Vakuumpumpe. PhD dissertation
Peters, B. J.
2020, August 5. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000122305

A Data-driven Approach for Estimating Relative Voltage Sensitivity
Karrari, S.; Vollmer, M.; Carne, G.; Noe, M.; Böhm, K.; et al.
2020. IEEE Power & Energy Society General Meeting (PESGM 2020), 1–5, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/PESGM41954.2020.9281859

Adaptive inertia emulation control for high-speed flywheel energy storage systems
Karrari, S.; Baghaee, H. R.; Carne, G.; Noe, M.; Geisbuesch, J.
2020. IET generation, transmission and distribution, 14 (22), 5047–5059. doi:10.1049/iet-gtd.2020.0066

Privacy Measures and Storage Technologies for Battery-Based Load Hiding - an Overview and Experimental Study
Arzamasov, V.; Schwerdt, R.; Karrari, S.; Böhm, K.; Nguyen, T. B.
2020. e-Energy ’20: Proceedings of the Eleventh ACM International Conference on Future Energy Systems, Melbourne, Australia, 22 - 26 June 2020, 178–195, Association for Computing Machinery (ACM). doi:10.1145/3396851.3398320

A holistic system approach for short range passenger aircraft with cryogenic propulsion system
Boll, M.; Corduan, M.; Biser, S.; Filipenko, M.; Pham, Q. H.; et al.
2020. Superconductor science and technology, 33 (4), Article: 044014. doi:10.1088/1361-6668/ab7779

Photovoltaik-Pflicht mit Verpachtungskataster: Optionen zur Gestaltung einer bundesweiten Pflicht zur Installation und zum Betrieb neuer Photovoltaikanlagen
Palacios, S.; Bauknecht, D.; Ritter, D.; Kahles, M.; Wegner, N.; et al.
2020. Umweltbundesamt (UBA)

Betrachtungen zum Klimaschutz und zur Versorgungssicherheit der Bayerischen Stromversorgung im Jahr 2035 : Gutachten im Auftrag der Fraktion Bündnis 90/Die Grünen im bayerischen Landtag
Koch, M.; Palacios, S.; Timpe, C.
2020. Öko-Institut e.V

Betrachtungen zum Klimaschutz und zur Versorgungssicherheit der Bayerischen Stromversorgung im Jahr 2035 : Grünes Online-Seminar: Eine sichere und saubere Zukunft für Bayerns Stromversorgung
Koch, M.; Palacios, S.; Timpe, C.
2020, December 1. Grünes Online-Seminar "Eine sichere und saubere Zukunft für Bayerns Stromversorgung" : Vortrag am Öko-Institut e.V. (2020), Freiburg, Germany, December 1, 2020

Electromechanical Assessment of a Sub Size Fusion Conductor based on High Temperature Superconductors
Nickel, D. S.; Wolf, M. J.; Weiss, K.-P.; Fietz, W. H.
2020, September 22. 31st Symposium on Fusion Technology (SOFT 2020), Online, September 20–25, 2020

Enhanced grid frequency support by means of HVDC-based load control
Langwasser, M.; Carne, G.; Liserre, M.; Biskoping, M.
2020. Electric power systems research, 189, Art.-Nr.: 106552. doi:10.1016/j.epsr.2020.106552

Power Hardware In the Loop infrastructure at KIT
Hubschneider, S.; Waczowicz, S.; Wiegel, F.; Karrari, S.; Sousa, W. T. B. de; et al.
2020, June 18. RT20: Opal-RT’s 12th Conference on Real-Time Simulation (2020), Online, June 18, 2020

DC breakdown tests with pressurized liquid nitrogen
Fink, S.; Zwecker, V.
2020. 2020 IEEE 3rd International Conference on Dielectrics (ICD), 6-31 July, online, 93–96, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/ICD46958.2020.9342003

Cryo-mechanical properties of high-strength-materials for fusion magnets after thermal deformation processing. master’s thesis
Kraskowski, A.
2020

Assessment of alternative divertor configurations as an exhaust solution for DEMO
Reimerdes, H.; Ambrosino, R.; Innocente, P.; Castaldo, A.; Chmielewski, P.; et al.
2020. Nuclear fusion, 60 (6), Art.-Nr.: 066030. doi:10.1088/1741-4326/ab8a6a

Smart transformer-based medium voltage grid support by means of active power control
Giacomuzzi, S.; Langwasser, M.; Carne, G.; Buja, G.; Liserre, M.
2020. CES Transactions on Electrical Machines and Systems, 4 (4), 285–294. doi:10.30941/CESTEMS.2020.00035

Utilization of a Cold Plasma Source for the Metal Foil Pump of a Fusion Reactor
Kathage, Y.; Hanke, S.; Vazquez Cortes, A.; Day, C.; Merli, S.; et al.
2020, September. 17th International Conference on Plasma Surface Engineering (Special PSE 2020), Erfurt, Germany, September 7–10, 2020

Self-consistent modelling of a linear microwave plasma source
Merli, S.; Kathage, Y.; Hanke, S.; Schulz, A.; Walker, M.
2020, September. 17th International Conference on Plasma Surface Engineering (Special PSE 2020), Erfurt, Germany, September 7–10, 2020

Design of the JT-60SA divertor cryopumps
Day, C.; Davis, S.; Hajnal, N.; Hamada, K.; Hauer, V.; et al.
2020, September. 31st Symposium on Fusion Technology (SOFT 2020), Online, September 20–25, 2020

Cold plasma source feasibility for a metal foil pump in DEMO
Kathage, Y.; Vazquez Cortes, A.; Day, C.; Hanke, S.; Gigerich, T.; et al.
2020, September. 31st Symposium on Fusion Technology (SOFT 2020), Online, September 20–25, 2020

Overview of the mercury diffusion pump developments for DEMO
Teichmann, T.; Day, C.; Giegerich, T.
2020, September. 31st Symposium on Fusion Technology (SOFT 2020), Online, September 20–25, 2020

Start-up and operational tritium inventories in the EU DEMO fuel cycle
Schwenzer, J.; Ciattaglia, S.; Day, C.; Hörstensmeyer, Y.
2020, September. 31st Symposium on Fusion Technology (SOFT 2020), Online, September 20–25, 2020

Material characterisation experiments for isotope rebalancing and protium removal in the EU-DEMO fuel cycle
Neugebauer, C.; Day, C.
2020, September. 31st Symposium on Fusion Technology (SOFT 2020), Online, September 20–25, 2020

Molecular Dynamics Simulation of Hydrogen Interactions with Group 5 Metals to characterize superpermeation process
Vazquez Cortes, A.; Kathage, Y.; Hanke, S.
2020, September. 31st Symposium on Fusion Technology (SOFT 2020), Online, September 20–25, 2020

Analytical prediction of particle exhaust in DEMO divertor configurations
Igitkhanov, Y.; Day, C.; Varoutis, S.; Tantos, C.
2020, September. 31st Symposium on Fusion Technology (SOFT 2020), Online, September 20–25, 2020

Robustness of the performances of NEG pumping solutions for fusion applications
Siviero, F.; Caruso, L.; Mura, M.; Maccallini, E.; Manini, P.; et al.
2020, September. 31st Symposium on Fusion Technology (SOFT 2020), Online, September 20–25, 2020

GPU acceleration of DEMO particle exhaust simulations
Varoutis, S.; Tantos, C.; Day, C.
2020, November. 1st Spanish Fusion HPC Workshop (2020), Online, November 27, 2020

The challenges of fuelling and pumping of fusion reactor plasmas
Day, C.; Igitkhanov, J.; Lang, P. T.; Varoutis, S.; Tantos, C.
2020, December. European Fusion Programme Workshop (EFPW 2020), Online, December 2–4, 2020

Progress of the R&D programme to develop a metal foil pump for DEMO
Hanke, S.; Day, C.; Giegerich, T.; Igitkhanov, J.; Kathage, Y.; et al.
2020. Fusion engineering and design, 161, Art.-Nr.: 111890. doi:10.1016/j.fusengdes.2020.111890

Required, achievable and target TBR for the European DEMO
Fischer, U.; Boccaccini, L. V.; Cismondi, F.; Coleman, M.; Day, C.; et al.
2020. Fusion engineering and design, 155, Art.-Nr.: 111553. doi:10.1016/j.fusengdes.2020.111553

Deterministic and stochastic modeling of rarefied gas flows in fusion particle exhaust systems
Tantos, C.; Varoutis, S.; Day, C.
2020. Journal of vacuum science & technology / B, 38 (6), Art.-Nr.: 064201. doi:10.1116/6.0000491

Modelling and performance evaluation of smart transformer in distribution grids
Longo, L.; Bruno, S.; Carne, G. D.; Liserre, M.
2020. 2020 IEEE Power & Energy Society General Meeting (PESGM), 2-6 August 2020, online, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/PESGM41954.2020.9281646

Impact of bending on critical current of HTS CrossConductors
Nickel, D. S.; Fietz, W. H.; Preuß, A.; Wolf, M. J.; Weiss, K.-P.; et al.
2020, November 4

High Temperature Superconductors for High Direct Current Applications
Wolf, M. J.
2020, November 5. Young Scientists Plenary / Applied Superconductivity Conference (ASC 2020), Online, October 24–November 7, 2020

Heat load budgeting of a superconducting induction heater‘s commercial cryocooler-based cryostat
Busch, L.; Lietzow, R.; Neumann, H.
2020. Deutsche Kälte- und Klimatagung

Heat load budgeting of a superconducting induction heater’s commercial cryocooler-based cryostat
Busch, L.
2020, November 20. Deutsche Kälte- und Klimatagung (DKV 2020), Online, November 19–20, 2020

Structure and properties of MgB2bulks: Ab-initio simulations compared to experiment
Romaka, V. V.; Prikhna, T. A.; Eisterer, M.; Shapovalov, A. P.; Goldacker, W.; et al.
2020. IOP conference series / Materials science and engineering, 756 (1), Art. Nr.: 012020. doi:10.1088/1757-899X/756/1/012020

Development of HTS Current Leads for the ITER Project
Bauer, P.; Ballarino, A.; Devred, A.; Ding, K.; Dong, Y.; et al.
2020. IOP conference series / Materials science and engineering, 756 (1), Art. Nr.: 012032. doi:10.1088/1757-899X/756/1/012032

Solar neutrino detection sensitivity in DARWIN via electron scattering
DARWIN Collaboration; Aalbers, J.; Agostini, F.; Maouloud, S. E. M. A.; Alfonsi, M.; et al.
2020. The European physical journal / C, 80 (12), Art.-Nr. 1133. doi:10.1140/epjc/s10052-020-08602-7

Numerical optimisation of mechanical ring reinforcement for bulk high-temperature superconductors
Barthlott, D.; Huang, K. Y.; Durrell, J. H.; Cardwell, D. A.; Holzapfel, B.; et al.
2020. Journal of Physics: Conference Series, 1559, 012031. doi:10.1088/1742-6596/1559/1/012031

Feasibility of ultra-compact HTS CrossConductor based Power Transmission Cables
Kottonau, D.; Wolf, M.; Fietz, W.; Stammen, J.; Hirsch, H.
2020. Journal of Physics: Conference Series, 1559, Art.Nr. 012084. doi:10.1088/1742-6596/1559/1/012084

Pulsed Laser Deposition of quasi-multilayer superconducting Ba(FeCo)2As-BaHfO nanocomposite films
Meyer, S.; Langer, M.; Grünewald, L.; Hänisch, J.; Gerthsen, D.; et al.
2020. Journal of Physics: Conference Series, 1559, Art.Nr. 012052. doi:10.1088/1742-6596/1559/1/012052

Design Space Exploration Study and Optimization of a Distributed Turbo-Electric Propulsion System for a Regional Passenger Aircraft
Biser, S.; Atanasov, G.; Hepperle, M.; Filipenko, M.; Keller, D.; et al.
2020. 2020 AIAA/IEEE Electric Aircraft Technologies Symposium, EATS 2020, New Orleans, United States, 26 - 28 August 2020, Art.Nr. 9235136, Institute of Electrical and Electronics Engineers (IEEE)

Design Space Exploration Study and Optimization of a Distributed Turbo-Electric Propulsion System for a Regional Passenger Aircraft
Biser, S.; Atanasov, G.; Hepperle, M.; Filipenko, M.; Keller, D.; et al.
2020. AIAA Propulsion and Energy 2020 Forum, 9–11 August 2021, Sheraton Denver Downtown, Denver, CO, Art. Nr.: 9235136, American Institute of Aeronautics and Astronautics. doi:10.2514/6.2020-3592

Effects of Zn doping on the pinning potential and the glass-liquid transition temperature of YBa₂Cu₃O₆+δ films
Ackermann, K.; Mai, V.; Hänisch, J.; Holzapfel, B.
2020. Journal of Physics: Conference Series, 1559, Article no: 012044. doi:10.1088/1742-6596/1559/1/012044

Parameter boundaries for the heteroepitaxial growth of REBCO films by e-beam quantitative evaporation on inclined substrate deposited MgO buffered Hastelloy tapes
Troshyn, O.; Hoffmann, C.; Große, V.; Hänisch, J.; Holzapfel, B.
2020. Journal of Physics: Conference Series, 1559, 012035. doi:10.1088/1742-6596/1559/1/012035

Effect of oxygenation process on flux pinning in pristine and BaHfO3 nanocomposite GdBa2Cu3O7 superconducting thin films
Popov, R.; Ackermann, K.; Rijckaert, H.; Hänisch, J.; Van Driessche, I.; et al.
2020. Journal of Physics: Conference Series, 1559, 012038. doi:10.1088/1742-6596/1559/1/012038

Simulation of the Thermal Performance of HTS Coated Conductors for HVDC SFCL
Sousa, W. T. B. de; Kudymow, A.; Strauss, S.; Palasz, S.; Elschner, S.; et al.
2020. Journal of physics / Conference series, 1559, Art.Nr. 012097. doi:10.1088/1742-6596/1559/1/012097

Basic considerations and recent results in HTS device developments for electric aircrafts
Arndt, T.
2020, January 30. Scientific Day, Safran (2020), Paris, France, January 29–30, 2020

T-A Formulation for the Design and AC Loss Calculation of a Superconducting Generator for a 10 MW Wind Turbine
Vargas-Llanos, C. R.; Lengsfeld, S.; Grilli, F.
2020. IEEE access, 8, 208767–208778. doi:10.1109/ACCESS.2020.3038058

Investigation of the crystallization process of CSD-ErBCO on IBAD-substrate via DSD approach
Hayasaka, R.; Cayado, P.; Erbe, M.; Freitag, W.; Hänisch, J.; et al.
2020. Scientific reports, 10 (1), Article no: 19934. doi:10.1038/s41598-020-76848-y

REBCO mixtures with large difference in rare-earth ion size: superconducting properties of chemical solution deposition-grown Yb₁₋ₓSmxBa₂Cu₃O₇₋ films
Cayado, P.; Li, M.; Erbe, M.; Liu, Z.; Cai, C.; et al.
2020. Royal Society Open Science, 7 (11), Article no: 201257. doi:10.1098/rsos.201257

Importance of the pyrolysis for microstructure and superconducting properties of CSD-grown GdBaCuO-HfO nanocomposite films by the ex-situ approach
Cayado, P.; Rijckaert, H.; Bruneel, E.; Erbe, M.; Hänisch, J.; et al.
2020. Scientific reports, 10, Art. Nr.: 19469. doi:10.1038/s41598-020-75587-4

Effect of the internal degrees of freedom of the gas molecules on the heat and mass transfer in long circular capillaries
Tantos, C.; Varoutis, S.; Day, C.
2020. Microfluidics and nanofluidics, 24 (12), Art.-Nr.: 95. doi:10.1007/s10404-020-02400-z

Influence of Processing Conditions on Properties of AISI 316LN Steel Grade
Kvackaj, T.; Rozsypalova, A.; Kocisko, R.; Bidulska, J.; Petrousek, P.; et al.
2020. Journal of materials engineering and performance, 29 (3), 1509–1514. doi:10.1007/s11665-020-04561-y

Topology Comparison of Superconducting AC Machines for Hybrid Electric Aircraft
Corduan, M.; Boll, M.; Bause, R.; Oomen, M. P.; Filipenko, M.; et al.
2020. IEEE transactions on applied superconductivity, 30 (2), Art. Nr.: 8947911. doi:10.1109/TASC.2019.2963396

Anisotropy of flux pinning properties in superconducting (Li,Fe)OHFeSe thin films
Hanisch, J.; Huang, Y.; Li, D.; Yuan, J.; Jin, K.; et al.
2020. Superconductor science and technology, 33, Art.-Nr.: 114009. doi:10.1088/1361-6668/abb118

Resistivity of REBCO tapes in overcritical current regime: Impact on superconducting fault current limiter modeling
Riva, N.; Sirois, F.; Lacroix, C.; De Sousa, W. T. B.; Dutoit, B.; et al.
2020. Superconductor science and technology, 33 (11), Art.-Nr.: 114008. doi:10.1088/1361-6668/aba34e

Sicherheitstechnik - Gefahren im Umgang mit Kryogenen
Neumann, H.
2020, October 8. 47. VDI-Forum Kryotechnik - Grundlagen und Arbeitstechniken, Entwicklungsstand, -tendenzen, Anwendungen (2020), Karlsruhe, Germany, October 7–9, 2020

Tieftemperaturmess- und -regelungstechnik
Neumann, H.
2020, October 8. 47. VDI-Forum Kryotechnik - Grundlagen und Arbeitstechniken, Entwicklungsstand, -tendenzen, Anwendungen (2020), Karlsruhe, Germany, October 7–9, 2020

Thermische Isolation
Neumann, H.
2020, October 8. 47. VDI-Forum Kryotechnik - Grundlagen und Arbeitstechniken, Entwicklungsstand, -tendenzen, Anwendungen (2020), Karlsruhe, Germany, October 7–9, 2020

Wärmeübertragung an Kryogene - Kühltechniken
Neumann, H.
2020, October 7. 47. VDI-Forum Kryotechnik - Grundlagen und Arbeitstechniken, Entwicklungsstand, -tendenzen, Anwendungen (2020), Karlsruhe, Germany, October 7–9, 2020

Industrielle Kryoanlagen
Neumann, H.; Blum, L.
2020, October 7. 47. VDI-Forum Kryotechnik - Grundlagen und Arbeitstechniken, Entwicklungsstand, -tendenzen, Anwendungen (2020), Karlsruhe, Germany, October 7–9, 2020

Thermodynamische Grundlagen der Kälteerzeugung
Neumann, H.; Alekseev, A.
2020, October 7. 47. VDI-Forum Kryotechnik - Grundlagen und Arbeitstechniken, Entwicklungsstand, -tendenzen, Anwendungen (2020), Karlsruhe, Germany, October 7–9, 2020

Einführung in die Kryotechnik
Holger Neumann
2020, October 7. 47. VDI-Forum Kryotechnik - Grundlagen und Arbeitstechniken, Entwicklungsstand, -tendenzen, Anwendungen (2020), Karlsruhe, Germany, October 7–9, 2020

Tritium Depth Profiling by Marker Layer
Röllig, M.; Aker, M.; Hara, M.; Aso, T.
2020, November. 3rd Asia Pacific Symposium on Tritium Science (APSOT-3 2020), Online, November 3–6, 2020

Cryogenic Hydrogen, Deuterium and Tritium at The Tritium Laboratory Karlsruhe
Größle, R.; Cristescu, I.; Krasch, B.; Kraus, A.; Priester, F.; et al.
2020, November. 3rd Asia Pacific Symposium on Tritium Science (APSOT-3 2020), Online, November 3–6, 2020

Cross-field demagnetization of stacks of tapes: 3D modelling and measurements
Kapolka, M.; Pardo, E.; Grilli, F.; Baskys, A.; Climente-Alarcon, V.; et al.
2020. Superconductor science and technology, 33 (4), Art. Nr.: 044019. doi:10.1088/1361-6668/ab5aca

Comparative study of CSD-grown BCO films with different rare earth elements: processing windows and
Erbe, M.; Cayado, P.; Freitag, W.; Ackermann, K.; Langer, M.; et al.
2020. Superconductor science and technology, 33 (9), Art.-Nr. 094002. doi:10.1088/1361-6668/ab9aa0

Mechanical and Electro-Mechanical Investigations of Assembled HTS CroCo Triplets
Nickel, D. S.; Wolf, M. J.; Weiss, K.-P.; Fietz, W. H.
2020. IEEE transactions on applied superconductivity, 30 (4), 1–5. doi:10.1109/TASC.2020.2972226

Supraleitung: Hochfeldmagnete und weitere Anwendungen
Kläser, M.
2020, October 9. 47. VDI-Forum Kryotechnik - Grundlagen und Arbeitstechniken, Entwicklungsstand, -tendenzen, Anwendungen (2020), Karlsruhe, Germany, October 7–9, 2020

Preface to the special issue ‘Focus on 10 Years of Iron-Based Superconductors’
Pallecchi, I.; Tarantini, C.; Hänisch, J.; Yamamoto, A.
2020. Superconductor science and technology, 33 (9), Art.Nr. 090301. doi:10.1088/1361-6668/ab9ad2

Superconducting motors for aircraft propulsion: the Advanced Superconducting Motor Experimental Demonstrator project
Grilli, F.; Benkel, T.; H¨anisch, J.; Lao, M.; Reis, T.; et al.
2020. Journal of physics / Conference series, 1590, Art.Nr. 012051. doi:10.1088/1742-6596/1590/1/012051

HTS CroCo - A Strand for High Direct Current Applications
Wolf, M. J.; Fietz, W. H.; Heiduk, M.; Heller, R.; Lange, C.; et al.
2020. 32nd International Symposium on Superconductivity, ISS 2019; Kyoto International Exhibition HallKyoto; Japan; 3 December 2019 through 5 December 2019, Art. Nr.: 012020, Institute of Physics Publishing Ltd (IOP Publishing Ltd). doi:10.1088/1742-6596/1590/1/012020

Dislocation-based Serrated Plastic Flow of High Entropy Alloys at Cryogenic Temperatures
Tirunilai, A. S.; Hanemann, T.; Weiss, K.-P.; Freudenberger, J.; Heilmaier, M.; et al.
2020. Acta materialia, 200, 980–991. doi:10.1016/j.actamat.2020.09.052

Comparative analysis and optimization of technical and weight parameters of turbo-electric propulsion systems
Filipenko, M.; Biser, S.; Boll, M.; Corduan, M.; Noe, M.; et al.
2020. Aerospace, 7 (8), Art.-Nr.: 107. doi:10.3390/AEROSPACE7080107

Suppression of Penning discharges between the KATRIN spectrometers
Aker, M.; Altenmüller, K.; Beglarian, A.; Behrens, J.; Berlev, A.; et al.
2020. The European physical journal / C, 80 (9), Article: 821. doi:10.1140/epjc/s10052-020-8278-y

Electromagnetic Modeling of Superconductors With Commercial Software: Possibilities With Two Vector Potential-Based Formulations
Grilli, F.; Pardo, E.; Morandi, A.; Gömöry, F.; Solovyov, M.; et al.
2020. IEEE transactions on applied superconductivity, 31 (1), 1–9. doi:10.1109/TASC.2020.3013028

A new benchmark problem for electromagnetic modelling of superconductors: the high-T superconducting dynamo
Ainslie, M.; Grilli, F.; Quéval, L.; Pardo, E.; Perez-Mendez, F.; et al.
2020. Superconductor science and technology, 33 (10), Article: 105009. doi:10.1088/1361-6668/abae04

Development and test of a 35 kA - HTS CroCo cable demonstrator
Weiss, K.-P.; Fietz, W. H.; Heiduk, M.; Lange, C.; Preuß, A.; et al.
2020. Journal of physics / Conference series, 1559, 012082. doi:10.1088/1742-6596/1559/1/012082

Case Study of the Tensile Fracture Investigation of Additive Manufactured Austenitic Stainless Steels Treated at Cryogenic Conditions
Bidulský, R.; Bidulská, J.; Gobber, F. S.; Kvačkaj, T.; Petroušek, P.; et al.
2020. Materials, 13 (15), Art.Nr. 3328. doi:10.3390/ma13153328

Recent advances in tritium modeling and its implications on tritium management for outer fuel cycle
Ying, A.; Riva, M.; Ahn, M.-Y.; Moreno, C.; Cristescu, I.
2020. Fusion engineering and design, 161, Art.Nr. 111895. doi:10.1016/j.fusengdes.2020.111895

High Critical Current Density and Enhanced Pinning in Superconducting Films of YBaCuO Nanocomposites with Embedded BaZrO, BaHfO, BaTiO, and SrZrO Nanocrystals
Díez-Sierra, J.; López-Domínguez, P.; Rijckaert, H.; Rikel, M.; Hänisch, J.; et al.
2020. ACS applied nano materials, 3 (6), 5542–5553. doi:10.1021/acsanm.0c00814

Anisotropic monoblock model for computing AC loss in partially coupled Roebel cables
Otten, S.; Kario, A.; Demenčik, E.; Nast, R.; Grilli, F.
2020. Superconductor science and technology, 33 (9), Article no: 094013. doi:10.1088/1361-6668/ab9939

A numerical model to introduce students to AC loss calculation in superconductors
Grilli, F.; Rizzo, E.
2020. European journal of physics, 41 (4), Art.Nr. 045203. doi:10.1088/1361-6404/ab90dc

Non-twisted stacks of coated conductors for magnets: Analysis of inductance and AC losses
Uglietti, D.; Kang, R.; Wesche, R.; Grilli, F.
2020. Cryogenics, 110, 103118. doi:10.1016/j.cryogenics.2020.103118

Commissioning of the Cryogenic Phase Equilibria Test Stand CryoPHAEQTS
Tamson, J.; Blanck, P.; Grohmann, S.
2020. IOP conference series / Materials science and engineering, 755, 012150. doi:10.1088/1757-899x/755/1/012150

Measurement of heat flux in multi-layer insulated helium cryostats after loss of insulating vacuum
Weber, C.; Henriques, A.; Schirle, S.; Grohmann, S.
2020. IOP conference series / Materials science and engineering, 755, 012155. doi:10.1088/1757-899x/755/1/012155

Investigation of cryogenic mixed-refrigerant cooled current leads in combination with peltier elements
Shabagin, E.; Raczka, K.; Grohmann, S.
2020. IOP conference series / Materials science and engineering, 755, 012138. doi:10.1088/1757-899x/755/1/012138

Optimizing the EU-DEMO pellet fuelling scheme
Lang, P. T.; Cismondi, F.; Day, C.; Fable, E.; Frattolillo, A.; et al.
2020. Fusion engineering and design, 156, Art.Nr. 111591. doi:10.1016/j.fusengdes.2020.111591

A new model for the analysis of quench in HTS cable-in-conduit conductors based on the twisted-stacked-tape cable concept for fusion applications
Zappatore, A.; Heller, R.; Savoldi, L.; Wolf, M. J.; Zanino, R.
2020. Superconductor science and technology, 33 (6), Art. Nr.: 065004. doi:10.1088/1361-6668/ab895b

The issue of Tritium in DEMO coolant and mitigation strategies
Santucci, A.; Incelli, M.; Noschese, L.; Moreno, C.; Di Fonzo, F.; et al.
2020. Fusion engineering and design, 158, Art. Nr.: 111759. doi:10.1016/j.fusengdes.2020.111759

High-resolution spectroscopy of gaseous Kr conversion electrons with the KATRIN experiment
Altenmüller, K.; Arenz, M.; Baek, W.-J.; Beck, M.; Beglarian, A.; et al.
2020. Journal of physics / G, 47 (6), Art. Nr.: 065002. doi:10.1088/1361-6471/ab8480

Screening Current-Induced Field and Field Drift Study in HTS coils using T-A homogenous model
Berrospe-Juarez, E.; Trillaud, F.; Zermeño, V. M. R.; Grilli, F.
2020. Journal of physics / Conference series, 1559, 012128. doi:10.1088/1742-6596/1559/1/012128

Overview of H-Formulation: A Versatile Tool for Modeling Electromagnetics in High-Temperature Superconductor Applications
Shen, B.; Grilli, F.; Coombs, T.
2020. IEEE access, 8, 100403–100414. doi:10.1109/ACCESS.2020.2996177

Distributed FACTS for Power System Transient Stability Control
Bruno, S.; Carne, G.; La Scala, M.
2020. Energies, 13 (11), Article no: 2901. doi:10.3390/en13112901

Permeator Simulations for the EU-DEMO Fuel Cycle
Hörstensmeyer, Y. N.; Tosti, S.; Santucci, A.; Bruni, G.
2020. Fusion science and technology, 76 (3), 232–237. doi:10.1080/15361055.2019.1705690

Technology Development for Isotope Rebalancing and Protium Removal in the EU-DEMO Fuel Cycle
Neugebauer, C.; Hörstensmeyer, Y.; Day, C.
2020. Fusion science and technology, 76 (3), 215–220. doi:10.1080/15361055.2019.1704139

Cooperative Fault-Tolerant Control of Microgrids under Switching Communication Topology
Afshari, A.; Karrari, M.; Baghaee, H. R.; Gharehpetian, G. B.; Karrari, S.
2020. IEEE transactions on smart grid, 11 (3), 1866–1879. doi:10.1109/TSG.2019.2944768

Entwicklung von Modellen zur speichergestützten Versorgung mit regenerativen Energien in Inselnetzen. PhD dissertation
Itschner, H.
2020, May 22. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000119425

T-A-Formulation to Model Electrical Machines With HTS Coated Conductor Coils
Benkel, T.; Lao, M.; Liu, Y.; Pardo, E.; Wolfstadter, S.; et al.
2020. IEEE transactions on applied superconductivity, 30 (6), 1–7. doi:10.1109/TASC.2020.2968950

Review of the AC loss computation for HTS using H formulation
Shen, B.; Grilli, F.; Coombs, T.
2020. Superconductor science and technology, 33 (3), 033002. doi:10.1088/1361-6668/ab66e8

Computing Strains Due to Screening Currents in REBCO Magnets
Kolb-Bond, D. J.; Berrospe-Juarez, E.; Bird, M.; Dixon, I. R.; Weijers, H. W.; et al.
2020. IEEE transactions on applied superconductivity, 30 (4), 1–5. doi:10.1109/TASC.2020.2979396

Fluorescent thermal imaging of a quench in insulated and non-insulated REBCO-wound pancake coils following a heater pulse at 77 K
Gyuráki, R.; Schreiner, F.; Benkel, T.; Sirois, F.; Grilli, F.
2020. Superconductor science and technology, 33 (3), Art. Nr.: 035006. doi:10.1088/1361-6668/ab6dc0

Screening Currents and Hysteresis Losses in the REBCO Insert of the 32 T All-Superconducting Magnet Using T-A Homogenous Model
Berrospe-Juarez, E.; Trillaud, F.; Zermeño, V. M. R.; Grilli, F.; Weijers, H. W.; et al.
2020. IEEE transactions on applied superconductivity, 30 (4), 1–5. doi:10.1109/TASC.2020.2969865

Observation of the Λb 0→J/ψΛϕ decay in proton-proton collisions at √s=13TeV
CMS Collaboration; Akbiyik, M.; Barth, C.; Baselga, M.; Baur, S.; et al.
2020. Physics letters / B, 802, Art. Nr.: 135203. doi:10.1016/j.physletb.2020.135203

Measurement of the top quark pair production cross section in dilepton final states containing one τ lepton in pp collisions at √s = 13 TeV
CMS Collaboration; Sirunyan, A. M.; Tumasyan, A.; Adam, W.; Ambrogi, F.; et al.
2020. Journal of high energy physics, 2020 (2), Art. Nr.: 191. doi:10.1007/JHEP02(2020)191

Progress of the conceptual design of the European DEMO breeding blanket, tritium extraction and coolant purification systems
Cismondi, F.; Spagnuolo, G. A.; Boccaccini, L. V.; Chiovaro, P.; Ciattaglia, S.; et al.
2020. Fusion engineering and design, 157, 111640. doi:10.1016/j.fusengdes.2020.111640

Grain boundary characteristics of Fe-based superconductors
Iida, K.; Hänisch, J.; Yamamoto, A.
2020. Superconductor science and technology, 33 (4), 043001. doi:10.1088/1361-6668/ab73ef

Load-Dependent Active Thermal Control of Grid-Forming Converters
Andresen, M.; Carne, G. de; Liserre, M.
2020. IEEE transactions on industry applications, 56 (2), 2078–2086. doi:10.1109/TIA.2020.2966573

Comparison of electromagnetic performance of 10-MW HTS double-stator flux modulation wind generators with different topologies
Cheng, Y.; Qu, R.; Gao, Y.; Wang, S.; Liu, Y.; et al.
2020. IEEE transactions on applied superconductivity, 30 (4), 5202307. doi:10.1109/TASC.2020.2975153

First operation of the KATRIN experiment with tritium
Aker, M.; Altenmüller, K.; Arenz, M.; Baek, W.-J.; Barrett, J.; et al.
2020. The European physical journal / C, 80 (3), Article: 264. doi:10.1140/epjc/s10052-020-7718-z

Evaluation of the Use of Superconducting 380 kV Cable
Kottonau, D.; Shabagin, E.; De Sousa, W.; Geisbüsch, J.; Noe, M.; et al.
2020. KIT Scientific Publishing. doi:10.5445/KSP/1000117918

Comparison of cryogenic deformation of the concentrated solid solutions CoCrFeMnNi, CoCrNi and CoNi
Tirunilai, A. S.; Hanemann, T.; Reinhart, C.; Tschan, V.; Weiss, K.-P.; et al.
2020. Materials science and engineering / A, 783, Art. Nr.: 139290. doi:10.1016/j.msea.2020.139290

Experimental Study of the Amorphous Magnetic Material for High-Speed Sleeve-Free PM Rotor Application
Ou, J.; Liu, Y.; Breining, P.; Schiefer, M.; Doppelbauer, M.
2020. IEEE transactions on industrial electronics, 67 (6), 4422–4432. doi:10.1109/TIE.2019.2931282

Challenges and Perspectives of the Phase Formation of Internally Oxidized PIT-Type Conductors
Buehler, C.; Holzapfel, B.; Sailer, B.; Wanior, M.; Abaecherli, V.; et al.
2020. IEEE transactions on applied superconductivity, 30 (4), Article: 6000805. doi:10.1109/TASC.2020.2969906

Advances in the physics studies for the JT-60SA tokamak exploitation and research plan
Giruzzi, G.; Yoshida, M.; Aiba, N.; Artaud, J. F.; Ayllon-Guerola, J.; et al.
2020. Plasma physics and controlled fusion, 62 (1), Art. Nr.: 014009. doi:10.1088/1361-6587/ab4771

The neutrino mass experiment KATRIN
KATRIN Collaboration; Fraenkle, F. M.
2020. Journal of physics / Conference series, 1342, Article No.012024. doi:10.1088/1742-6596/1342/1/012024

Improved Performance of CSD-Grown Y₁₋ₓGdₓBa₂Cu₃O₇-BaHfO₃ Nanocomposite Films on Ni5W Substrates
Cayado, P.; Rijckaert, H.; Thersleff, T.; Erbe, M.; Hanisch, J.; et al.
2020. IEEE transactions on applied superconductivity, 30 (4), Article no: 6600204. doi:10.1109/TASC.2020.2966429

Hydraulic characterization of conductor prototypes for fusion magnets
Lewandowska, M.; Dembkowska, A.; Heller, R.; Świerblewski, J.; Wolf, M.
2020. Cryogenics, 105, Article: 103013. doi:10.1016/j.cryogenics.2019.103013

Development of no-insulation racetrack coils wound with second generation high temperature superconductor tapes for a stator system for wind generators
Schreiner, F.; Liu, Y.; Zhang, Y.; Gyuraki, R.; Noe, M.; et al.
2020. IEEE transactions on applied superconductivity, 30 (4), Art. Nr.: 8968627. doi:10.1109/TASC.2020.2969112

Pressure-driven dynamic process simulation using a new generic stream object
Thomas, I.; Wunderlich, B.; Grohmann, S.
2020. Chemical engineering science, 215, 115171. doi:10.1016/j.ces.2019.115171

Flow-induced noise generation at the outlet of a capillary tube = Génération de bruit provoquée par l’écoulement à la sortie d’un tube capillaire
Ruebeling, J.; Grohmann, S.
2020. International journal of refrigeration, 111, 188–196. doi:10.1016/j.ijrefrig.2019.11.021

Fluorescent thermal imaging method for investigating transient effects in high-temperature superconductor tapes and coils. PhD dissertation
Gyuráki, R.
2020. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000104677

Rapid Pyrolysis of SmBa2Cu3O7-δ Films in CSD-MOD Using Extremely-Low-Fluorine Solutions
Li, M.; Cayado, P.; Erbe, M.; Jung, A.; Hänisch, J.; et al.
2020. Coatings, 10 (1), 31. doi:10.3390/coatings10010031

Superconducting HfO₂-YBa₂Cu₃O₇₋δ Nanocomposite Films Deposited Using Ink-Jet Printing of Colloidal Solutions
Rijckaert, H.; Cayado, P.; Nast, R.; Diez Sierra, J.; Erbe, M.; et al.
2020. Coatings, 10 (1), 17. doi:10.3390/coatings10010017

CSD-Grown Yv₁₋ₓGdₓBa₂Cu₃O₇₋δ-BaHfO₃ Nanocomposite Films on Ni5W and IBAD Technical Substrates
Cayado, P.; Rijckaert, H.; Erbe, M.; Langer, M.; Jung, A.; et al.
2020. Nanomaterials, 10 (1), 21. doi:10.3390/nano10010021

Current redistribution in a superconducting multi-strand 35kA DC cable demonstrator
Wolf, M. J.; Fietz, W., H.; Heiduk, M.; Lange, C.; Preuss, A.; et al.
2020. Applied Superconductivity Conference (ASC 2020), Tampa, FL, USA, June 28–July 3, 2020

Current redistribution in a superconducting multi-strand 35kA DC cable demonstrator
Wolf, M. J.; Fietz, W., H.; Heiduk, M.; Lange, C.; Preuss, A.; et al.
2020. Applied Superconductivity Conference (ASC 2020), Tampa, FL, USA, June 28–July 3, 2020

Grain Boundaries in Fe-Based Superconductors
Hänisch, J.; Iida, K.
2020. Superconductivity – From Materials Science to Practical Applications. Ed.: P. Mele, 269–302, Springer International Publishing. doi:10.1007/978-3-030-23303-7_10

Design of a superconducting DC wind generator. PhD dissertation
Liu, Y.
2020. KIT Scientific Publishing. doi:10.5445/KSP/1000083023

Energy Time-Series Features for Emerging Applications on the Basis of Human-Readable Machine Descriptions
Vollmer, M.; Englhardt, A.; Trittenbach, H.; Bielski, P.; Karrari, S.; et al.
2019. Tenth ACM International Conference on Future Energy Systems (ACM e-Energy) and its co-located workshops, Phoenix, AZ, United States, 25th - 28th of June 2019, 474–481, Association for Computing Machinery (ACM). doi:10.1145/3307772.3331022

Simulation of the Thermal Performance of HTS Coated Conductors for HVDC SFCL
Batista de Sousa, W. T.; Kudymow, A.; Strauss, S.; Palasz, S.; Noe, M.
2019, September. 14th European Conference on Applied Superconductivity (EUCAS 2019), Glasgow, United Kingdom, September 1–5, 2019

Predesign Considerations for the DC Link Voltage Level of the CENTRELINE Fuselage Fan Drive Unit
Biser, S.; Wortmann, G.; Ruppert, S.; Filipenko, M.; Noe, M.; et al.
2019. Aerospace, 6 (12), Art. Nr.: 126. doi:10.3390/aerospace6120126

Structural properties of superconducting Ba(Fe,Co)2As2thin films
Grünewald, L.; Langer, M.; Meyer, S.; Hänisch, J.; Holzapfel, B.; et al.
2019, September 3. Microscopy Conference (MC 2019), Berlin, Germany, September 1–5, 2019

First measurements with the CMS DAQ and timing hub prototype-1
Blažek, R.; Behrens, U.; Branson, J.; Brummer, P.; Cittolin, S.; et al.
2019. Proceedings of Topical Workshop on Electronics for Particle Physics, TWEPP 2019, Santiago de Compostela, Spain, 2 - 6 September 2019, Code 160323

Beryllium global erosion and deposition at JET-ILW simulated with ERO2.0
JET Contributors; Romazanov, J.; Brezinsek, S.; Borodin, D.; Groth, M.; et al.
2019. Nuclear materials and energy, 18, 331–338. doi:10.1016/j.nme.2019.01.015

Modelling of tungsten erosion and deposition in the divertor of JET-ILW in comparison to experimental findings
JET Contributors; Kirschner, A.; Brezinsek, S.; Huber, A.; Meigs, A.; et al.
2019. Nuclear materials and energy, 18, 239–244. doi:10.1016/j.nme.2019.01.004

An assessment of nitrogen concentrations from spectroscopic measurements in the JET and ASDEX upgrade divertor
JET Contributors; Henderson, S. S.; Bernert, M.; Brezinsek, S.; Carr, M.; et al.
2019. (Team, EUROfusion MST1 & Team, ASDEX Upgrade, Eds.) Nuclear materials and energy, 18, 147–152. doi:10.1016/j.nme.2018.12.012

Impact of ICRF on the scrape-off layer and on plasma wall interactions: From present experiments to fusion reactor
JET Contributors; Bobkov, V.; Aguiam, D.; Bilato, R.; Brezinsek, S.; et al.
2019. (Team, ASDEX Upgrade, Team, Alcator C.-Mod & Team, EUROfusion MST1, Eds.) Nuclear materials and energy, 18, 131–140. doi:10.1016/j.nme.2018.11.017

Determination of tungsten sources in the JET-ILW divertor by spectroscopic imaging in the presence of a strong plasma continuum
JET Contributors; Huber, A.; Brezinsek, S.; Kirschner, A.; Strom, P.; et al.
2019. Nuclear materials and energy, 18, 118–124. doi:10.1016/j.nme.2018.12.009

Recurrence Plots for Dynamic Analysis of Type-I ELMs at JET With a Carbon Wall
JET Contributors; Cannas, B.; Fanni, A.; Murari, A.; Pisano, F.; et al.
2019. IEEE transactions on plasma science, 47 (4), 1871–1877. doi:10.1109/TPS.2019.2901313

COREDIV numerical simulation of high neutron rate JET-ILW DD pulses in view of extension to JET-ILW DT experiments
JET Contributors; Telesca, G.; Ivanova-Stanik, I.; Zagorski, R.; Brezinsek, S.; et al.
2019. Nuclear fusion, 59 (5), Art. Nr.: 056026. doi:10.1088/1741-4326/ab0c47

Diagnostic of fast-ion energy spectra and densities in magnetized plasmas
Hegra Collaboration; JET Contributors; Salewski, M.; Nocente, M.; Madsen, B.; et al.
2019. (Team, ASDEX Upgrade & Team, EUROfusion MST1, Eds.) Journal of Instrumentation, 14, Art. Nr.: C05019. doi:10.1088/1748-0221/14/05/C05019

Dynamic modelling of local fuel inventory and desorption in the whole tokamak vacuum vessel for auto-consistent plasma-wall interaction simulations
JET Contributors; Denis, J.; Bucalossi, J.; Ciraolo, G.; Hodille, E. A.; et al.
2019. Nuclear materials and energy, 19, 550–557. doi:10.1016/j.nme.2019.03.019

Improved ERO modelling of beryllium erosion at ITER upper first wall panel using JET-ILW and PISCES-B experience
JET Contributors; Borodin, D.; Romazanov, J.; Pitts, R. A.; Lisgo, S. W.; et al.
2019. Nuclear materials and energy, 19, 510–515. doi:10.1016/j.nme.2019.03.016

Modelling of the effect of ELMs on fuel retention at the bulk W divertor of JET
JET Contributors; Heinola, K.; Ahlgren, T.; Brezinsek, S.; Vuoriheimo, T.; et al.
2019. Nuclear materials and energy, 19, 397–402. doi:10.1016/j.nme.2019.03.013

The effect of beryllium oxide on retention in JET ITER-like wall tiles
JET Contributors; Makepeace, C.; Pardanaud, C.; Roubin, P.; Borodkina, I.; et al.
2019. Nuclear materials and energy, 19, 346–351. doi:10.1016/j.nme.2019.02.022

RF sheath modeling of experimentally observed plasma surface interactions with the JET ITER-Like Antenna
JET Contributors; Krivska, A.; Bobkov, V.; Colas, L.; Dumortier, P.; et al.
2019. Nuclear materials and energy, 19, 324–329. doi:10.1016/j.nme.2019.03.009

Investigation of deuterium trapping and release in the JET divertor during the third ILW campaign using TDS
JET Contributors; Likonen, J.; Heinola, K.; De Backer, A.; Baron-Wiechec, A.; et al.
2019. Nuclear materials and energy, 19, 300–306. doi:10.1016/j.nme.2019.03.012

Deposition of impurity metals during campaigns with the JET ITER-like Wall
EUROfusion Consortium; JET Contributors; Widdowson, A.; Goad, J. P.; Alves, E.; et al.
2019. (Consortium, EUROfusion, Ed.) Nuclear materials and energy, 19, 218–224. doi:10.1016/j.nme.2018.12.024

Investigation of deuterium trapping and release in the JET ITER-like wall divertor using TDS and TMAP
JET Contributors; Likonen, J.; Heinola, K.; De Backer, A.; Baron-Wiechec, A.; et al.
2019. Nuclear materials and energy, 19, 166–178. doi:10.1016/j.nme.2019.02.031

Comparison of the structure of the plasma-facing surface and tritium accumulation in beryllium tiles from JET ILW campaigns 2011-2012 and 2013-2014
JET Contributors; Pajuste, E.; Kizane, G.; Igaune, I.; Avotina, L.; et al.
2019. Nuclear materials and energy, 19, 131–136. doi:10.1016/j.nme.2019.02.011

First mirror test in JET for ITER: Complete overview after three ILW campaigns
JET Contributors; Moon, S.; Petersson, P.; Rubel, M.; Fortuna-Zalesna, E.; et al.
2019. Nuclear materials and energy, 19, 59–66. doi:10.1016/j.nme.2019.02.009

Geodesic acoustic mode evolution in L-mode approaching the L-H transition on JET
JET Contributors; Silva, C.; Hillesheim, J. C.; Gil, L.; Hidalgo, C.; et al.
2019. Plasma physics and controlled fusion, 61 (7), Art. Nr.: 075007. doi:10.1088/1361-6587/ab1e73

Impact of fast ions on density peaking in JET: fluid and gyrokinetic modeling
JET Contributors; Eriksson, F.; Oberparleiter, M.; Skyman, A.; Nordman, H.; et al.
2019. Plasma physics and controlled fusion, 61 (7), Art. Nr.: 075008. doi:10.1088/1361-6587/ab1e65

EDGE2D-EIRENE simulations of the influence of isotope effects and anomalous transport coefficients on near scrape-off layer radial electric field
JET Contributors; Chankin, A., V; Corrigan, G.; Maggi, C. F.; Abduallev, S.; et al.
2019. Plasma physics and controlled fusion, 61 (7), Art. Nr.: 075010. doi:10.1088/1361-6587/ab1629

The software and hardware architecture of the real-time protection of in-vessel components in JET-ILW
JET Contributors; Huber, V.; Hubert, A.; Kinna, D.; Matthews, G. F.; et al.
2019. Nuclear fusion, 59 (7), Art. Nr.: 076016. doi:10.1088/1741-4326/ab1a79

Isotope identity experiments in JET-ILW with H and D L-mode plasmas
JET Contributors; Maggi, C. F.; Weisen, H.; Casson, F. J.; Auriemma, F.; et al.
2019. Nuclear fusion, 59 (7), Art. Nr: 076028. doi:10.1088/1741-4326/ab1ccd

Role of the pedestal position on the pedestal performance in AUG, JET-ILW and TCV and implications for ITER
JET Contributors; Frassinetti, L.; Dunne, M. G.; Sheikh, U.; Saarelma, S.; et al.
2019. (Team, ASDEX Upgrade, Team, TCV & Team, EUROfusion MST1, Eds.) Nuclear fusion, 59 (7), Art. Nr.: 076038. doi:10.1088/1741-4326/ab1eb9

Micro ion beam analysis for the erosion of beryllium marker tiles in a tokamak limiter
JET Contributors; Zhou, Y.; Bergsaker, H.; Bykov, I.; Petersson, P.; et al.
2019. Nuclear instruments & methods in physics research / B, 450, 200–204. doi:10.1016/j.nimb.2018.08.028

Self-consistent pedestal prediction for JET-ILW in preparation of the DT campaign
JET Contributors; Saarelma, S.; Frassinetti, L.; Bilkova, P.; Challis, C. D.; et al.
2019. Physics of plasmas, 26 (7), Art.: 072501. doi:10.1063/1.5096870

Scenario development for D-T operation at JET
JET Contributors; Garzotti, L.; Challis, C.; Dumont, R.; Frigione, D.; et al.
2019. Nuclear fusion, 59 (7), Art. Nr.: 076037. doi:10.1088/1741-4326/ab1cca

Energetic ion losses ‘channeling’ mechanism and strategy for mitigation
JET Contributors; Nabais, F.; Bizarro, J. P. S.; Borba, D.; Coelho, R.; et al.
2019. Plasma physics and controlled fusion, 61 (8), Art. Nr.: 084008. doi:10.1088/1361-6587/ab27fd

Simulation of neutron emission in neutral beam injection heated plasmas with the real-time code RABBIT
JET Contributors; Weiland, M.; Bilato, R.; Collins, C. S.; Heidbrink, W. W.; et al.
2019. Nuclear fusion, 59 (8), Art. Nr.: 086002. doi:10.1088/1741-4326/ab1edd

Beryllium melting and erosion on the upper dump plates in JET during three ITER-like wall campaigns
JET Contributors; Jepu, I.; Matthews, G. F.; Widdowson, A.; Rubel, M.; et al.
2019. Nuclear fusion, 59 (8), Art. Nr.: 086009. doi:10.1088/1741-4326/ab2076

Adaptive learning for disruption prediction in non-stationary conditions
JET Contributors; Murari, A.; Lungaroni, M.; Gelfusa, M.; Peluso, E.; et al.
2019. Nuclear fusion, 59 (8), Art. Nr.: 086037. doi:10.1088/1741-4326/ab1ecc

Direct gyrokinetic comparison of pedestal transport in JET with carbon and ITER-like walls
JET Contributors; Hatch, D. R.; Kotschenreuther, M.; Mahajan, S. M.; Merlo, G.; et al.
2019. Nuclear fusion, 59 (8), Art. Nr.: 086056. doi:10.1088/1741-4326/ab25bd

First principles and integrated modelling achievements towards trustful fusion power predictions for JET and ITER
JET Contributors; Garcia, J.; Dumont, R. J.; Joly, J.; Morales, J.; et al.
2019. Nuclear fusion, 59 (8), Art. Nr.: 086047. doi:10.1088/1741-4326/ab25b1

Current Research into Applications of Tomography for Fusion Diagnostics
JET Contributors; Mlynar, J.; Craciunescu, T.; Ferreira, D. R.; Carvalho, P.; et al.
2019. Journal of fusion energy, 38 (3-4), 458–466. doi:10.1007/s10894-018-0178-x

Gyrokinetic analysis and simulation of pedestals to identify the culprits for energy losses using ‘fingerprints’
JET Contributors; Kotschenreuther, M.; Liu, X.; Hatch, D. R.; Mahajan, S.; et al.
2019. Nuclear fusion, 59 (9), Art. Nr.: 096001. doi:10.1088/1741-4326/ab1fa2

Multiphysics approach to plasma neutron source modelling at the JET tokamak
JET Contributors; Stancar, Z.; Gorelenkova, M.; Conroy, S.; Sauvan, P.; et al.
2019. Nuclear fusion, 59 (9), Art. Nr.: 096020. doi:10.1088/1741-4326/ab2c8b

Erosion, screening, and migration of tungsten in the JET divertor
JET Contributors; Brezinsek, S.; Kirschner, A.; Mayer, M.; Baron-Wiechec, A.; et al.
2019. Nuclear fusion, 59 (9), Art. Nr.: 096035. doi:10.1088/1741-4326/ab2aef

Role of fast ion pressure in the isotope effect in JET L-mode plasmas
JET Contributors; Bonanomi, N.; Casiraghi, I.; Mantica, P.; Challis, C.; et al.
2019. Nuclear fusion, 59 (9), Art. Nr.: 096030. doi:10.1088/1741-4326/ab2d4f

Synthetic diagnostic for the JET scintillator probe lost alpha measurements
JET Contributors; Varje, J.; Kiptily, V.; Siren, P.; Weisen, H.; et al.
2019. Journal of Instrumentation, 14, Art. Nr.: C09018. doi:10.1088/1748-0221/14/09/C09018

Deep neural networks for plasma tomography with applications to JET and COMPASS
JET Contributors; Carvalho, D. D.; Ferreira, D. R.; Carvalho, P. J.; Imrisek, M.; et al.
2019. Journal of Instrumentation, 14, Art. Nr.: C09011. doi:10.1088/1748-0221/14/09/C09011

Preliminary configuration of the torus vacuum pumping system installed in the DEMO lower port
Giegerich, T.; Day, C.; Gliss, C.; Luo, X.; Strobel, H.; et al.
2019. Fusion engineering and design, 146 (Part B), 2180–2183. doi:10.1016/j.fusengdes.2019.03.147

Effect of neutral screening on pumping efficiency in the DEMO divertor
Varoutis, S.; Igitkhanov, Y.; Day, C.
2019. Fusion engineering and design, 146 (Part B), 1741–1746. doi:10.1016/j.fusengdes.2019.03.029

Implementation and exploitation of JET enhancements at different fuel mixtures in preparation for DT operation and next step devices
JET Contributors; Murari, A.; Bekris, N.; Figueiredo, J.; Kim, H.-T.; et al.
2019. Fusion engineering and design, 146 (Part A), 741–744. doi:10.1016/j.fusengdes.2019.01.068

Monitoring and control of the magnet system of JT-60SA
Fukui, K.; Kamiy, K.; Natsume, K.; Kawano, K.; Isono, T.; et al.
2019. Fusion engineering and design, 146, 411–416. doi:10.1016/j.fusengdes.2018.12.080

A wall-aligned grid generator for non-linear simulations of MHD instabilities in tokamak plasmas
JET Contributors; Pamela, S.; Huijsmans, G.; Thornton, A. J.; Kirk, A.; et al.
2019. (Team, MAST & Team, JOREK, Eds.) Computer physics communications, 243, 41–50. doi:10.1016/j.cpc.2019.05.007

Novel method for determination of tritium depth profiles in metallic samples
JET Contributors; Pajuste, E.; Kizane, G.; Avotina, L.; Teimane, A. S.; et al.
2019. Nuclear fusion, 59 (10), Art. Nr.: 106006. doi:10.1088/1741-4326/ab3056

A machine learning approach based on generative topographic mapping for disruption prevention and avoidance at JET
JET Contributors; Pau, A.; Fanni, A.; Carcangiu, S.; Cannas, B.; et al.
2019. Nuclear fusion, 59 (10), Art. Nr.: 106017. doi:10.1088/1741-4326/ab2ea9

A new mechanism for increasing density peaking in tokamaks: improvement of the inward particle pinch with edge E x B shearing
JET Contributors; Garcia, J.; Doerk, H.; Goerler, T.; Abduallev, S.; et al.
2019. Plasma physics and controlled fusion, 61 (10), Art. Nr.: 104002. doi:10.1088/1361-6587/ab31a4

Modification of the Alfven wave spectrum by pellet injection
JET Contributors; Oliver, H. J. C.; Sharapov, S. E.; Breizman, B. N.; Fontanilla, A. K.; et al.
2019. Nuclear fusion, 59 (10), Art. Nr.: 106031. doi:10.1088/1741-4326/ab382b

Ion cyclotron resonance heating scenarios for DEMO
JET Contributors; Van Eester, D.; Lerche, E.; Ragona, R.; Messiaen, A.; et al.
2019. Nuclear fusion, 59 (10), Art. Nr.: 106051. doi:10.1088/1741-4326/ab318b

Control of the hydrogen:deuterium isotope mixture using pellets in JET
JET Contributors; Valovič, M.; Baranov, Y.; Boboc, A.; Buchanan, J.; et al.
2019. Nuclear fusion, 59 (10), Art. Nr.: 106047. doi:10.1088/1741-4326/ab3812

Interpretative and predictive modelling of Joint European Torus collisionality scans
JET Contributors; Eriksson, F.; Fransson, E.; Oberparleiter, M.; Nordman, H.; et al.
2019. Plasma physics and controlled fusion, 61 (11), Art. Nr.: 115004. doi:10.1088/1361-6587/ab2f45

Environmental life-cycle assessment of high-temperature superconductor tape production
Buchholz, A.; Große, V.; Weil, M.; Noe, M.
2019. 14th European Conference on Applied Superconductivity (EUCAS 2019), Glasgow, United Kingdom, September 1–5, 2019

A power-balance model of the density limit in fusion plasmas: application to the L-mode tokamak
JET Contributors; Zanca, P.; Sattin, F.; Escande, D. F.; Abduallev, S.; et al.
2019. (Meigs, AG, Ed.) Nuclear fusion, 59 (12), Art. Nr.: 126011. doi:10.1088/1741-4326/ab3b31

Energieeffiziente Supraleiter für Zukunftstechnologien
Heidelberger, M.; Wiebe, S.; Fietz, W.
2019. (Strategische Entwicklung und Kommunikation (SEK), Ed.). doi:10.5445/DIVA/2019-171

Study of the Electromagnetic and Mechanical Properties of a High-silicon Steel for a High-speed Interior PM Rotor
Ou, J.; Liu, Y.; Breining, P.; Gietzelt, T.; Wunsch, T.; et al.
2019. 2019 22nd International Conference on Electrical Machines and Systems (ICEMS), Article No.8921800, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/ICEMS.2019.8921800

Commissioning of the cryogenic phase equilibria test stand CryoPHAEQTS
Tamson, J.; Blanck, P.; Grohmann, S.
2019, July 24. 22nd Cryogenic Engineering Conference and International Cryogenic Materials Conference (CEC / ICMC 2019), Hartford, CT, USA, July 21–25, 2019

Einsatz eines kompakten, mikrostrukturierten Wärmeübertragers im kryogenen Gemischkältekreislauf
Shabagin, E.; Grohmann, S.
2019, November 21. Jahrestagung des Deutschen Kälte- und Klimatechnischen Vereins (DKV 2019), Ulm, Germany, November 20–22, 2019

Influence of mixture composition on the performance of cryogenic mixed refrigerant cooled current leads
Shabagin, E.; Grohmann, S.
2019, April 8. 15th Cryogenics - IIR International Conference (2019), Prague, Czechia, April 7–11, 2019

Measurement of heat flux in multi-layer insulated helium cryostats after loss of insulating vacuum
Weber, C.; Henriques, A.; Schirle, S.; Grohmann, S.
2019, July 22. 22nd Cryogenic Engineering Conference and International Cryogenic Materials Conference (CEC / ICMC 2019), Hartford, CT, USA, July 21–25, 2019

Investigation of cryogenic mixed-refrigerant cooled current leads in combination with Peltier elements
Shabagin, E.; Raczka, K.; Grohmann, S.
2019, July 22. 22nd Cryogenic Engineering Conference and International Cryogenic Materials Conference (CEC / ICMC 2019), Hartford, CT, USA, July 21–25, 2019

A new European Standard for the protection of helium cryostats against excessive pressure
Grohmann, S.
2019, July 22. 22nd Cryogenic Engineering Conference and International Cryogenic Materials Conference (CEC / ICMC 2019), Hartford, CT, USA, July 21–25, 2019

Status of a european standard for the protection of helium cryostats against excessive pressure
Weber, C.
2019, September 17. Rembe Process Safety Days – Process Pressure Safety and Relief (2019), Brilon, Germany, September 17–18, 2019

Standardization and material databases: a successful example¶
Grohmann, S.
2019, September 17. 2nd AMICI-Industry Forum (2019), Brussels, Belgium, September 17–18, 2019

Development potential of mid-scale cooling systems for HTS applications
Grohmann, S.
2019, October 16. 3rd International Workshop on Cooling Systems for High-temperature Superconductor Applications (IWC-HTS 2019), Niskayuna, NY, USA, October 15–17, 2019

Inbetriebnahme des Cryogenic Phase Equilibria Test Stand CryoPHAEQTS
Tamson, J.; Grohmann, S.; Blanck, P.
2019, November 22. Jahrestagung des Deutschen Kälte- und Klimatechnischen Vereins (DKV 2019), Ulm, Germany, November 20–22, 2019

A new European Standard for the protection of helium cryostats against excessive pressure
Grohmann, S.
2019, November 22. Jahrestagung des Deutschen Kälte- und Klimatechnischen Vereins (DKV 2019), Ulm, Germany, November 20–22, 2019

Validation of the ICRF antenna coupling code RAPLICASOL against TOPICA and experiments
Tierens, W.; Milanesio, D.; Urbanczyk, G.; Helou, W.; Bobkov, V.; et al.
2019. (Team, ASDEX Upgrade & Team, EUROfusion MST1, Eds.) Nuclear fusion, 59 (4), Art. Nr.: 046001. doi:10.1088/1741-4326/aaf455

Determination of isotope ratio in the divertor of JET-ILW by high-resolution H alpha spectroscopy: H-D experiment and implications for D-T experiment
JET Contributors; Neverov, V. S.; Kukushkin, A. B.; Kruezi, U.; Stamp, M. F.; et al.
2019. Nuclear fusion, 59 (4), Art. Nr.: 046011. doi:10.1088/1741-4326/ab0000

ELM-induced cold pulse propagation in ASDEX Upgrade
Trier, E.; Wolfrum, E.; Willensdorfer, M.; Yu, Q.; Hoelzl, M.; et al.
2019. (Team, ASDEX Upgrade & Team, EUROfusion MST1, Eds.) Plasma physics and controlled fusion, 61 (4), Art. Nr.: 045003. doi:10.1088/1361-6587/aaf9c3

Full-orbit and drift calculations of fusion product losses due to explosive fishbones on JET
JET Contributors; Fitzgerald, M.; Buchanan, J.; Sharapov, S. E.; Kiptily, V. G.; et al.
2019. Nuclear fusion, 59 (1), Art. Nr.: 016004. doi:10.1088/1741-4326/aaea1e

Measuring fast ions in fusion plasmas with neutron diagnostics at JET
JET Contributors; Eriksson, J.; Hellesen, C.; Binda, F.; Cecconello, M.; et al.
2019. Plasma physics and controlled fusion, 61 (1), Art. Nr.: 014027. doi:10.1088/1361-6587/aad8a6

Runaway electron beam control
JET Contributors; Carnevale, D.; Ariola, M.; Artaserse, G.; Bagnato, F.; et al.
2019. Plasma physics and controlled fusion, 61 (1), Art. Nr.: 014036. doi:10.1088/1361-6587/aaef53

Electrical and thermal behaviours of insulated and non insulated HTS wound pancake coils at 77 K
Gyuráki, R.; Schreiner, F.; Benkel, T.; Sirois, F.; Grilli, F.
2019. 14th European Conference on Applied Superconductivity (EUCAS 2019), Glasgow, United Kingdom, September 1–5, 2019

AC loss calculation in electrical machines with HTS coils using T-A formulation
Benkel, T.; Lao, M.; Liu, Y.; Pardo, E.; Wolfstädter, S.; et al.
2019. 14th European Conference on Applied Superconductivity (EUCAS 2019), Glasgow, United Kingdom, September 1–5, 2019

A locked mode indicator for disruption prediction on JET and ASDEX upgrade
JET Contributors; Sias, G.; Cannas, B.; Fanni, A.; Murari, A.; et al.
2019. (ASDEX Upgrade Team, the & EUROfusion MST1 Team, the, Eds.) Fusion engineering and design, 138, 254–266. doi:10.1016/j.fusengdes.2018.11.021

Tritium distributions on W-coated divertor tiles used in the third JET ITER-like wall campaign
Hatano, Y.; Lee, S. E.; Likonen, J.; Koivuranta, S.; Hara, M.; et al.
2019. Nuclear materials and energy, 18, 258–261. doi:10.1016/j.nme.2019.01.001

Towards real-time simulation of large-scale HTS systems using T-A formulation
Berrospe-Juarez, E.; Zermeño, V.; Trillaud, F.; Grilli, F.
2019. 14th European Conference on Applied Superconductivity (EUCAS 2019), Glasgow, United Kingdom, September 1–5, 2019

Magnetic vector potential-based formulations for modeling superconducting applications: a valid alternative to the H-formulation
Grilli, F.; Zermeño, V.; Brambilla, R.; Benkel, T.; Morandi, A.; et al.
2019. 26th International Conference on Magnet Technology (MT26 2019), Vancouver, Canada, September 22–27, 2019

Performance analysis of a NbTi level sensor while filling LHe into a cryostat
Kunniyoor, K. R.; Richter, T.; Ghosh, P.; Lietzow, R.; Schlachter, S.; et al.
2019. Indian Journal of Cryogenics, 44 (1), 161. doi:10.5958/2349-2120.2019.00028.1

TFA-MOD-grown BaHfO3-REBa2Cu3O7-δ nanocomposite films on buffered Ni-5at%W tapes
Freitag, W.; Erbe, M.; Cayado, P.; Falter, M.; Hänisch, J.; et al.
2019, September 2. 14th European Conference on Applied Superconductivity (EUCAS 2019), Glasgow, United Kingdom, September 1–5, 2019

IEEE WG P2004 First Consolidated Draft and Progress of Chapter 4
Geisbuesch, J.; Etinge, E.
2019, September 4. 21st European Conference on Power Electronics and Applications (EPE`23 ECCE Europe 2019), Genova, Italy, September 2–6, 2019

IEEE WG P2004 Status of Chapter 4
Geisbuesch, J.; Etinge, E.
2019, May 23. 13rd International conference of the IMACS TC1 Committee (ELECTRIMACS 2019), Salerno, Italy, May 21–23, 2019

Real-Time Simulation and System Integration
Geisbuesch, J.; Karrari, S.; Kottonau, D.; Batista de Sousa, W. T.; Kreideweis, P.; et al.
2019, June 5. 9th International Conference on Smart Grids, Green Communications and IT Energy-aware Technologies (ENERGY 2019), Athens, Greece, June 2–6, 2019

DERlab (European Distributed Energy Resources Laboratories) activities
Geisbuesch, J.
2019, November 14. ES2050 Arbeitstreffen FT1 (2019), Dresden, Germany, November 13–14, 2019

Status of Energy Lab 2.0 and projects from the power grid side
Geisbuesch, J.
2019, June 19. 3rd Workshop: Applications and challenges in Power-to-X-Systems - Energy Lab 2.0 meets Neo-Carbon Energy (2019), Lappeenranta, Finland, June 17–19, 2019

High-field electrical transport properties of THEVA GdBa2Cu3O7 coated conductors
Lao, M.; Liu, Y.; Benkel, T.; Hänisch, J.; Chaud, X.; et al.
2019. 26th International Conference on Magnet Technology (MT26 2019), Vancouver, Canada, September 22–27, 2019

Electrical transport properties of NdFeAs(O,F) thin films on vicinal substrates
Lida, K.; Tarantini, C.; Matsumoto, T.; Kondo, K.; Hatano, T.; et al.
2019. Materials Research Meeting (2019), Yokohama, Japan, December 10–14, 2019

Jc in Fe-based superconducting films – dimensionality, anisotropy, microstructure
Hänisch, J.
2019. 14th European Conference on Applied Superconductivity (EUCAS 2019), Glasgow, United Kingdom, September 1–5, 2019

Gyrokinetic simulations of toroidal Alfven eigenmodes excited by energetic ions and external antennas on the Joint European Torus
JET Contributors; Aslanyan, V.; Taimourzadeh, S.; Shi, L.; Lin, Z.; et al.
2019. Nuclear fusion, 59 (2), Art. Nr.: 026008. doi:10.1088/1741-4326/aaf430

Real-time plasma state monitoring and supervisory control on TCV
Blanken, T. C.; Felici, F.; Galperti, C.; Kong, M.; Sauter, O.; et al.
2019. (Team, EUROfusion MST1 & Team, TCV, Eds.) Nuclear fusion, 59 (2), Art. Nr.: 026017. doi:10.1088/1741-4326/aaf451

Superconducting motors for aircraft propulsion: the Advanced Superconducting Motor Experimental Demonstrator project
Grilli, F.; Benkel, T.; Hänisch, J.; Lao, M.; Reis, T.; et al.
2019, December 3. 32 International Symposium on Superconductivity (ISS 2019), Kyoto, Japan, December 3–5, 2019

Project FASTGRID - Tests on 2G HTS for its Application in DC Resistive SC FCL
Kudymow, A.; Sousa, W. T. B. de; Elschner, S.; Palasz, S.; Noe, M.
2019, September 3. 14th European Conference on Applied Superconductivity (EUCAS 2019), Glasgow, United Kingdom, September 1–5, 2019

Status of the European Union Project FASTGRID
Tixador, P.; Bauer, M.; Bruzek, C.-E.; Calleja, A.; Deutscher, G.; et al.
2019. IEEE transactions on applied superconductivity, 29 (5), Article: 5603305. doi:10.1109/TASC.2019.2908586

Chemical Solution Deposition (CSD)
Bäcker, M.; Baumann, A.; Brunkahl, O.; Erbe, M.; Schneller, T.
2019. digital Encyclopedia of Applied Physics. Ed.: G. L. Trigg, 1–34, John Wiley and Sons. doi:10.1002/3527600434.eap807

Pinning enhancement in CSD-grown REBCO nanocomposites towards high-field applications
Erbe, M.; Cayado, P.; Freitag, W.; Meledin, A.; Falter, M.; et al.
2019. 14th European Conference on Applied Superconductivity (EUCAS 2019), Glasgow, United Kingdom, September 1–5, 2019

Advanced CSD-grown REBCO nano-composites for high-field applications
Erbe, M.; Cayado, P.; Freitag, W.; Meledin, A.; Hänisch, J.; et al.
2019. Joint Cryogenic Engineering Conference and International Cryogenic Materials Conference (CEC/ICMC 2019), Hartford, CT, USA, July 21–25, 2019

Analysis of the outer divertor hot spot activity in the protection video camera recordings at JET
Drenik, A.; Brezinsek, S.; Carvalho, P.; Huber, V.; Osterman, N.; et al.
2019. Fusion engineering and design, 139, 115–123. doi:10.1016/j.fusengdes.2018.12.079

Improved neutron activation dosimetry for fusion
Vasilopoulou, T.; Stamatelatos, I. E.; Batistoni, P.; Colangeli, A.; Flammini, D.; et al.
2019. Fusion engineering and design, 139, 109–114. doi:10.1016/j.fusengdes.2019.01.002

Improved performance of CSD-grown YxGd1-xBa2Cu3O7-BaHfO3 nanocomposite films on Ni5W substrate
Cayado, P.; Erbe, M.; Haenisch, J.; Holzapfel, B.; Thersleff, T.; et al.
2019. 26th International Conference on Magnet Technology (MT26 2019), Vancouver, Canada, September 22–27, 2019

Optimization of the oxygenation process in CSD-grown REBa2Cu3O7-x films
Cayado, P.; Hauck, D.; Erbe, M.; Hänisch, J.; Holzapfel, B.
2019. 14th European Conference on Applied Superconductivity (EUCAS 2019), Glasgow, United Kingdom, September 1–5, 2019

Pulsed Laser Deposition of quasi-multilayer superconducting Ba(Fe0.92Co0.08)2As2-BaHfO3 nanocomposite films
Meyer, S.; Langer, M.; Grünewald, L.; Hänisch, J.; Gerthsen, D.; et al.
2019. 14th European Conference on Applied Superconductivity (EUCAS 2019), Glasgow, United Kingdom, September 1–5, 2019

HTS Systems and Value Propositions
Arndt, T.
2019, December 5. 32nd International Symposium on Superconductivity (ISS 2019), Kyoto, Japan, December 3–5, 2019

Pulsed Laser Deposition of quasi-multilayer superconducting Ba(Fe0.92Co0.08)2As2-BaHfO3 nanocomposite films
Meyer, S.; Langer, M.; Grünewald, L.; Hänisch, J.; Gerthsen, D.; et al.
2019. 14th European Conference on Applied Superconductivity (EUCAS 2019)

HTS for Accelerators - Connections to Industry and Applications
Arndt, T.
2019, November 14. 105th Plenary ECFA Meeting (2019), Geneva, Switzerland, November 14–15, 2019

Cooling Methods for HTS Applications - Challenges and Approaches
Arndt, T.
2019, October 17. 3 International Workshop on Cooling Systems for High-Temperature Superconductor Applications (2019), Niskayuna, NY, USA, October 15–17, 2019

Reel-to-reel laser striated (RE)BCO strands for long length Roebel cables
Nast, r.; Kling, A.; Ringsdorf, B.; Jung, A.; Grilli, F.
2019, September 4. 14th European Conference on Applied Superconductivity (EUCAS 2019), Glasgow, United Kingdom, September 1–5, 2019

Inter-strand resistance and AC loss in resin-filler impregnated ReBCO Roebel cables
Gao, P.; Dhallé, M.; Nugteren, B. van; Norder, H.; Kario, A.; et al.
2019. Superconductor science and technology, 32 (12), Article no: 125002. doi:10.1088/1361-6668/ab4665

HTS Roebel cables, status and potential
Goldacker, W.; Kario, A.; Otten, S.
2019, July. Joint Cryogenic Engineering Conference and International Cryogenic Materials Conference (CEC/ICMC 2019), Hartford, CT, USA, July 21–25, 2019

Role of strains in superconducting Nb3Sn
Goldacker, W.; Fluekiger, R.
2019, July. Joint Cryogenic Engineering Conference and International Cryogenic Materials Conference (CEC/ICMC 2019), Hartford, CT, USA, July 21–25, 2019

Overwiew on HTS projects and applications worldwide
Goldacker, W.; Noe, M.
2019, October. European Cryogenics Days (2019), Lund, Sweden, October 7–8, 2019

Population modelling of the He II energy levels in tokamak plasmas: I. Collisional excitation model
Lawson, K. D.; Aggarwal, K. M.; Coffey, I. H.; Keenan, F. P.; O’Mullane, M. G.; et al.
2019. Journal of physics / B, 52 (4), Art. Nr.: 045001. doi:10.1088/1361-6455/aaf703

Influences of the Resistive SFCL on the Incremental Power Frequency Relay of Transmission Lines
Dong, Q.; Sousa, W. T. B. de; Geng, J.; Zhang, X.; Zhang, H.; et al.
2019. IEEE transactions on applied superconductivity, 29 (2), Art. Nr.: 8629324. doi:10.1109/TASC.2019.2895926

Improved Upper Limit on the Neutrino Mass from a Direct Kinematic Method by KATRIN
KATRIN Collaboration; Aker, M.; Altenmüller, K.; Arenz, M.; Babutzka, M.; et al.
2019. Physical review letters, 123 (22), Art.-Nr. 221802. doi:10.1103/PhysRevLett.123.221802

Analysis of deposited layers with deuterium and impurity elements on samples from the divertor of JET with ITER-like wall
Ström, P.; Petersson, P.; Rubel, M.; Fortuna-Zaleśna, E.; Widdowson, A.; et al.
2019. Journal of nuclear materials, 516, 202–213. doi:10.1016/j.jnucmat.2018.11.027

Long-lived coupled peeling ballooning modes preceding ELMs on JET
JET Contributors; Perez von Thun, C.; Frassinetti, L.; Horvath, L.; Saarelma, S.; et al.
2019. Nuclear fusion, 59 (5), Art. Nr.: 056004. doi:10.1088/1741-4326/ab0031

Fast ion synergistic effects in JET high performance pulses
JET Contributors; Kirov, K. K.; Baranov, Y.; Carvalho, I. S.; Challis, C. D.; et al.
2019. Nuclear fusion, 59 (5), Art. Nr.: 056005. doi:10.1088/1741-4326/ab02ae

Application of Gaussian process regression to plasma turbulent transport model validation via integrated modelling
JET Contributors; Ho, A.; Citrin, J.; Auriemma, F.; Bourdelle, C.; et al.
2019. Nuclear fusion, 59 (5), Art. Nr.: 056007. doi:10.1088/1741-4326/ab065a

Holistic system approach for electric aircraft using superconducting components
Boll, M.; Corduan, M.; Biser, S.; Weber, P.; Kuehn, L.; et al.
2019. 14th European Conference on Applied Superconductivity (EUCAS 2019), Glasgow, United Kingdom, September 1–5, 2019

Efficient HTS DC- Cable for Power Distribution in Hybrid-Electric Aircraft
Elschner, S.; Schlachter, S. I.; Brand, J.; Fink, S.; Holzapfel, B.; et al.
2019, September 2. 14th European Conference on Applied Superconductivity (EUCAS 2019), Glasgow, United Kingdom, September 1–5, 2019

HTS Cable for Power Distribution in Hybrid-Electric Propulsion System for Aircraft
Schlachter, S. I.; Brand, J.; Elschner, S.; Fink, S.; Holzapfel, B.; et al.
2019, July 24. Joint Cryogenic Engineering Conference and International Cryogenic Materials Conference (CEC/ICMC 2019), Hartford, CT, USA, July 21–25, 2019

The neutrino mass experiment KATRIN
KATRIN Collaboration; Fraenkle, F. M.
2019. Ukrainian journal of physics, 64 (7), 573–576. doi:10.15407/ujpe64.7.573

Approximate analytic expressions using Stokes model for tokamak polarimetry and their range of validity
JET Contributors; Orsitto, F. P.; Segre, S. E.
2019. Plasma physics and controlled fusion, 61 (5), Art. Nr.: 055008. doi:10.1088/1361-6587/ab09c2

Vakuumtechnik und Gefahren im Umgang mit Kryogenen
Neumann, H.
2019, September 27. Haus der Technik - Seminar - Kryostatbau (2019), Karlsruhe, Germany, September 25–27, 2019

MSR - Sicherheitstechnik
Neumann, H.
2019, September 26. Haus der Technik - Seminar - Kryostatbau (2019), Karlsruhe, Germany, September 25–27, 2019

MSR - Prozessmesstechnik
Neumann, H.
2019, September 26. Haus der Technik - Seminar - Kryostatbau (2019), Karlsruhe, Germany, September 25–27, 2019

MSR - Kryoventile
Neumann, H.
2019, September 26. Haus der Technik - Seminar - Kryostatbau (2019), Karlsruhe, Germany, September 25–27, 2019

MSR - kryogene Temperaturmessung
Neumann, H.
2019, September 26. Haus der Technik - Seminar - Kryostatbau (2019), Karlsruhe, Germany, September 25–27, 2019

Thermodynamische Grundlagen
Neumann, H.
2019, September 25. Haus der Technik - Seminar - Kryostatbau (2019), Karlsruhe, Germany, September 25–27, 2019

Sicherheitstechnik - Gefahren im Umgang mit Kryogenen
Neumann, H.
2019, March 28. 48. VDI-Forum Kryotechnik - Grundlagen und Arbeitstechniken, Entwicklungsstand, -tendenzen, Anwendungen (2019), Karlsruhe, Germany, March 27–29, 2019

Tieftemperaturmess- und Regeltechnik
Neumann, H.
2019, March 28. 48. VDI-Forum Kryotechnik - Grundlagen und Arbeitstechniken, Entwicklungsstand, -tendenzen, Anwendungen (2019), Karlsruhe, Germany, March 27–29, 2019

Thermische Isolation
Neumann, H.
2019, March 28. 48. VDI-Forum Kryotechnik - Grundlagen und Arbeitstechniken, Entwicklungsstand, -tendenzen, Anwendungen (2019), Karlsruhe, Germany, March 27–29, 2019

Wärmeübertragung an Kryogene - Kühltechniken
Neumann, H.
2019, March 27. 48. VDI-Forum Kryotechnik - Grundlagen und Arbeitstechniken, Entwicklungsstand, -tendenzen, Anwendungen (2019), Karlsruhe, Germany, March 27–29, 2019

Kryotechnik - Einführung
Neumann, H.
2019, March 27. 48. VDI-Forum Kryotechnik - Grundlagen und Arbeitstechniken, Entwicklungsstand, -tendenzen, Anwendungen (2019), Karlsruhe, Germany, March 27–29, 2019

On a fusion born triton effect in JET deuterium discharges with H-minority ion cyclotron range of frequencies heating
JET Contributors; Kiptily, V. G.; Belli, F.; Eriksson, J.; Hellesen, C.; et al.
2019. Nuclear fusion, 59 (6), Art. Nr.: 064001. doi:10.1088/1741-4326/ab19f5

On the growth of Co-doped BaFeAs thin films on CaF
Langer, M.; Meyer, S.; Ackermann, K.; Grünewald, L.; Kauffmann-Weiss, S.; et al.
2019. Journal of physics / Conference Series, 1293 (1), 012014. doi:10.1088/1742-6596/1293/1/012014

Magnetically induced anisotropy of flux penetration into strong-pinning superconductor/ferromagnet bilayers
Simmendinger, J.; Hänisch, J.; Bihler, M.; Ionescu, A. M.; Weigand, M.; et al.
2019. New journal of physics, 21 (11), 113019. doi:10.1088/1367-2630/ab4f56

Simple and fast method for computing induced currents in superconductors using freely available solvers for ordinary differential equations
Otten, S.; Grilli, F.
2019. IEEE transactions on applied superconductivity, 29 (8), Article No.8202008. doi:10.1109/TASC.2019.2949240

Development of a viable route for lithium-6 supply of DEMO and future fusion power plants
Giegerich, T.; Battes, K.; Schwenzer, J. C.; Day, C.
2019. Fusion engineering and design, 149, Article: 111339. doi:10.1016/j.fusengdes.2019.111339

Overview of physics studies on ASDEX Upgrade
Meyer, H.; Angioni, C.; Albert, C. G.; Arden, N.; Arredondo Parra, R.; et al.
2019. Nuclear fusion, 59 (11), Article: 112014. doi:10.1088/1741-4326/ab18b8

Design Comparisons of Concentric Three-Phase HTS Cables
Kottonau, D.; Sousa, W. T. B. de; Bock, J.; Noe, M.
2019. IEEE transactions on applied superconductivity, 29 (6), Art. Nr.: 5401508. doi:10.1109/TASC.2019.2897893

A method for sizing centralised energy storage systems using standard patterns
Karrari, S.; Ludwig, N.; Hagenmeyer, V.; Noe, M.
2019. 2019 IEEE Milan PowerTech, 23-27 June 2019, Milan, Italy, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/PTC.2019.8810658

Design and analysis of HTS subsize-conductors for quench investigations towards future HTS fusion magnets
Wolf, M. J.; Heller, R.; Fietz, W. H.; Weiss, K.-P.
2019. Cryogenics, 104, Art.Nr. 102980. doi:10.1016/j.cryogenics.2019.102980

Fe-based superconducting thin films—preparation and tuning of superconducting properties
Hänisch, J.; Lida, K.; Hühne, R.; Tarantini, C.
2019. Superconductor science and technology, 32 (9), 093001. doi:10.1088/1361-6668/ab1c00

15 Min Dc breakdown tests with liquid nitrogen
Fink, S.; Zwecker, V.
2019. 2019 IEEE 20th International Conference on Dielectric Liquids (ICDL), Roma, Italy, June 23-27, 2019, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/ICDL.2019.8796723

An unconditionally stable laguerre based finite difference method for transient diffusion and convection-diffusion problems
De Sousa, W. T. B.; Matt, C. F. T.
2019. Numerical mathematics, 12 (3), 681–708. doi:10.4208/nmtma.OA-2018-0026

Investigation of PM eddy current losses in surface-mounted PM motors caused by PWM
Ou, J.; Liu, Y.; Liang, D.; Doppelbauer, M.
2019. IEEE transactions on power electronics, 34 (11), 11253–11263. doi:10.1109/TPEL.2019.2895679

Overview of the JET preparation for deuterium–tritium operation with the ITER like-wall
Joffrin, E.; Abduallev, S.; Abhangi, M.; Abreu, P.; Afanasev, V.; et al.
2019. Nuclear fusion, 59 (11), Art. Nr.: 112021. doi:10.1088/1741-4326/ab2276

Experimental study of second sound quench detection for superconducting cavities
Plouin, J.; Baudouy, B.; Four, A.; Charrier, J. P.; Maurice, L.; et al.
2019. Physical review accelerators and beams, 22 (8), 083202. doi:10.1103/PhysRevAccelBeams.22.083202

Fluorescent thermal imaging of a non-insulated pancake coil wound from high temperature superconductor tape
Gyuráki, R.; Benkel, T.; Schreiner, F.; Sirois, F.; Grilli, F.
2019. Superconductor science and technology, 32 (10), 105006. doi:10.1088/1361-6668/ab38f2

Measurement of exclusive ρ(770)⁰ photoproduction in ultraperipheral pPb collisions at √sNN=5.02Te
CMS Collaboration; Sirunyan, A. M.; Tumasyan, A.; Adam, W.; Ambrogi, F.; et al.
2019. The European physical journal / C, 79 (8), Article no: 702. doi:10.1140/epjc/s10052-019-7202-9

Conceptual Design of High Temperature Superconducting Toroidal Field Coils for Future Fusion Power Plants. PhD dissertation
Gade, P. V.
2019. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000098163

Dependence on plasma shape and plasma fueling for small edge-localized mode regimes in TCV and ASDEX Upgrade
Labit, B.; Eich, T.; Harrer, G. F.; Wolfrum, E.; Bernert, M.; et al.
2019. Nuclear fusion, 59 (8), 086020. doi:10.1088/1741-4326/ab2211

A critical assessment of thermal-hydraulic modeling of HTS twisted-stacked-tape cable conductors for fusion applications
Zappatore, A.; Fietz, W. H.; Heller, R.; Savoldi, L.; Wolf, M. J.; et al.
2019. Superconductor science and technology, 32 (8), Article: 084004. doi:10.1088/1361-6668/ab20a9

Monte Carlo simulation of a dynamic sieve system
Luo, X.; Day, C.
2019. 31st International Symposium on Rarefied Gas Dynamics, Glasgow, UK, July 23-27, 2018, 090004–1–090004, American Institute of Physics (AIP). doi:10.1063/1.5119589

The metal foil pump - How cold plasma helps to meet hot plasma
Day, C.
2019. 7th 7th International Conference on Advanced Plasma Technologies (ICAPT-7 2019), Hue, Vietnam, February 24–March 1, 2019

Innovative fuel cycle concepts for the EU-DEMO
Giegerich, T.; Butler, B.; Day, C.; Hanke, S.; Härtl, T.; et al.
2019. 28th IEEE Symposium on Fusion Engineering (SOFE 2019), Ponte Vedra Beach, FL, USA, June 2–6, 2019

In-field performance and flux pinning mechanism of pulsed laser deposition grown BaSnO3/GdBa2Cu3O7–δ nanocomposite coated conductors by SuperOx
Lao, M.; Willa, R.; Meledin, A.; Rijckaert, H.; Chepikov, V.; et al.
2019. Superconductor science and technology, 32 (9), 094003. doi:10.1088/1361-6668/ab2a95

Microscopic origin of highly enhanced current carrying capabilities of thin NdFeAs(O,F) films
Kauffmann-Weiss, S.; Iida, K.; Tarantini, C.; Boll, T.; Schneider, R.; et al.
2019. Nanoscale Advances, 1–13. doi:10.1039/C9NA00147F

Real-time simulation of large-scale HTS systems: Multi-scale and homogeneous models using the T-A formulation
Berrospe-Juarez, E.; Zermeño, V. M. R.; Trillaud, F.; Grilli, F.
2019. Superconductor science and technology, 32 (6), 065003/1–14. doi:10.1088/1361-6668/ab0d66

Production and Characterization of Strands for a 35 kA HTS DC Cable Demonstrator
Preuss, A.; Wolf, M. J.; Heiduk, M.; Lange, C.; Fietz, W. H.
2019. IEEE transactions on applied superconductivity, 29 (5), 1–5. doi:10.1109/TASC.2019.2909208

Investigation of AC Loss in HTS Cross-Conductor Cables for Electrical Power Transmission
Shen, B.; Coombs, T.; Grilli, F.
2019. IEEE transactions on applied superconductivity, 29 (2), Art. Nr.: 8536400. doi:10.1109/TASC.2018.2881491

Quench Analysis of the HTS CrossConductor for a Toroidal Field Coil
Heller, R.; Blanchier, P.; Fietz, W. H.; Wolf, M. J.
2019. IEEE transactions on applied superconductivity, 29 (7), 1–11. doi:10.1109/TASC.2019.2917154

Smartcoil - Design, assembly and test of a 10 MVA superconducting air coil fault current limiter
Kudymow, A.; Bauer, A.; Elschner, S.; Goldacker, W.; Kraemer, H.-P.; et al.
2019. Superconductor science and technology, 32 (6), Art.-Nr.: 065002. doi:10.1088/1361-6668/ab099a

Overview of the DEMO staged design approach in Europe
Federici, G.; Bachmann, C.; Barucca, L.; Baylard, C.; Biel, W.; et al.
2019. Nuclear fusion, 59 (6), Art.-Nr.: 066013. doi:10.1088/1741-4326/ab1178

Crystallographic ordering in a series of Al-containing refractory high entropy alloys Ta-Nb-Mo-Cr-Ti-Al
Chen, H.; Kauffmann, A.; Seils, S.; Boll, T.; Liebscher, C. H.; et al.
2019. Acta materialia, 176, 123–133. doi:10.1016/j.actamat.2019.07.001

Transient Simulation and Recovery Time of a Three-Phase Concentric HTS Cable
De Sousa, W. T. B.; Kottonau, D.; Noe, M.
2019. IEEE transactions on applied superconductivity, 29 (5), 8649604. doi:10.1109/TASC.2019.2900937

A smart three-loop fuel cycle architecture for DEMO
Day, C.; Butler, B.; Giegerich, T.; Ploeckl, B.; Varoutis, S.
2019. Fusion engineering and design, 146 (Part B), 2462–2468. doi:10.1016/j.fusengdes.2019.04.019

Manifestation of granularity in the transport current of coated conductors
Lao, M.; Pahlke, P.; Sieger, M.; Falter, M.; Bäcker, M.; et al.
2019. Superconductor science and technology, 32 (5), Art.-Nr.: 055004. doi:10.1088/1361-6668/ab0677

Effect of resin impregnation on the transverse pressure dependence of the critical current in ReBCO Roebel cables
Gao, P.; Wessel, W. A. J.; Dhallé, M.; Otten, S.; Kario, A. U.; et al.
2019. Superconductor science and technology, 32 (5), Art.-Nr.: 055006. doi:10.1088/1361-6668/ab08bd

Initial integration concept of the DEMO lower horizontal port
Gliss, C.; Ambrosino, R.; Bachmann, C.; Ciattaglia, S.; Flammini, D.; et al.
2019. Fusion engineering and design, 146B, 2667–2670. doi:10.1016/j.fusengdes.2019.04.078

Current Limitation Experiments on a 1 MVA-Class Superconducting Current Limiting Transformer
Hellmann, S.; Abplanalp, M.; Elschner, S.; Kudymow, A.; Noe, M.
2019. IEEE transactions on applied superconductivity, 29 (5), Article: 8675321. doi:10.1109/TASC.2019.2906804

Addressing the feasibility of inboard direct-line injection of high-speed pellets, for core fueling of DEMO
Frattolillo, A.; Baylor, L. R.; Bombarda, F.; Cismondi, F.; Colangeli, A.; et al.
2019. Fusion engineering and design, 146 (Pt. B), 2426–2429. doi:10.1016/j.fusengdes.2019.04.009

AC Loss Modeling in Superconducting Coils and Motors with Parallel Tapes as Conductor
Pardo, E.; Grilli, F.; Liu, Y.; Wolftadler, S.; Reis, T.
2019. IEEE transactions on applied superconductivity, 29 (5), Art.-Nr.: 5202505. doi:10.1109/TASC.2019.2899148

First high-resolution spectrum and line-by-line analysis of the 2ν band of HTO around 3.8 microns
Reinking, J.; Schlösser, M.; Hase, F.; Orphal, J.
2019. Journal of quantitative spectroscopy & radiative transfer, 230, 61–64. doi:10.1016/j.jqsrt.2019.03.017

Overcritical Current Resistivity of YBCO-Coated Conductors Through Combination of PCM and Finite-Element Analysis
Riva, N.; Richard, S.; Sirois, F.; Lacroix, C.; Dutoit, B.; et al.
2019. IEEE transactions on applied superconductivity, 29 (5), Art.-Nr.: 6601705. doi:10.1109/TASC.2019.2902038

Recent achievements of the Pd-Ag membrane technologies in tritium extraction system applications
Santucci, A.; Antunes, R.; Bruni, G.; Mallozzi, F.; Incelli, M.; et al.
2019. Fusion engineering and design, 146 B, 2242–2246. doi:10.1016/j.fusengdes.2019.03.162

Galet – Benchmark of a Geant4 based application for the simulation and design of Beta Induced X-ray Spectrometry systems
Röllig, M.; Aso, T.; Hara, M.; Priester, F.
2019. Fusion engineering and design, 143, 91–98. doi:10.1016/j.fusengdes.2019.03.086

Tritium supply and processing for the first KATRIN tritium operation
Welte, S.; Hillesheimer, D.; Le, L. T.; Schäfer, S.; Fanghänel, E.; et al.
2019, April. 12th International Conference on Tritium Science and Technology (Tritium 2019), Busan, South Korea, April 22–26, 2019

Investigation of line shapes and band structure in IR absorption spectra of a liquid and gaseous concentrated HD sample
Mirz, S.; Groessle, R.
2019, April. 12th International Conference on Tritium Science and Technology (Tritium 2019), Busan, South Korea, April 22–26, 2019

Material studies to reduce the tritium memory effect in BIXS analytic systems
Aker, M.; Röllig, M.
2019, April. 12th International Conference on Tritium Science and Technology (Tritium 2019), Busan, South Korea, April 22–26, 2019

Study on the heat transfer of helium cryostats following loss of insulating vacuum
Weber, C.; Henriques, A.; Grohmann, S.
2019. IOP conference series / Materials science and engineering, 502 (1), 012170. doi:10.1088/1757-899x/502/1/012170

Set-up of the cryogenic phase equilibria test stand CryoPHAEQTS
Tamson, J.; Stamm, M.; Grohmann, S.
2019. IOP conference series / Materials science and engineering, 502 (1), 012087. doi:10.1088/1757-899x/502/1/012087

Development of 10 kA Current Leads Cooled by a Cryogenic Mixed-Refrigerant Cycle
Shabagin, E.; Grohmann, S.
2019. IOP conference series / Materials science and engineering, 502 (1), 012138. doi:10.1088/1757-899x/502/1/012138

Status of a European Standard for the protection of helium cryostats against excessive pressure
Grohmann, S.; Barthélémy, H.; Down, R.; Ercolani, E.; Fournel, J.-L.; et al.
2019. IOP conference series / Materials science and engineering, 502 (1), 012171. doi:10.1088/1757-899x/502/1/012171

Heat transfer and pressure drop in the main heat exchanger of a cryogenic mixed refrigerant cycle
Gomse, D.; Grohmann, S.
2019. IOP conference series / Materials science and engineering, 502 (1), 012027. doi:10.1088/1757-899X/502/1/012027

Bewertung des Einsatzes supraleitender 380-kV-Kabel
Kottonau, D.; Shabagin, E.; Batista de Sousa, W. T.; Geisbüsch, J.; Noe, M.; et al.
2019. KIT Scientific Publishing. doi:10.5445/KSP/1000093864

International round robin test for tensile testing HTS wires at cryogenic temperatures
Bagrets, N.; Anvar, V. A.; Chiesa, L.; Delgado, M. A.; McRae, D. M.; et al.
2019. Superconductor science and technology, 32 (2), Art. Nr.: 024005. doi:10.1088/1361-6668/aaf619

DEMO tritium fuel cycle: performance, parameter explorations, and design space constraints
Coleman, M.; Hörstensmeyer, Y.; Cismondi, F.
2019. Fusion engineering and design, 141, 79–90. doi:10.1016/j.fusengdes.2019.01.150

Numerical study and experimental verification of protium permeation through Pd/Ag membranes for fusion applications
Antunes, R.; Frances, L.; Incelli, M.; Santucci, A.
2019. Fusion engineering and design, 146A, 1286–1290. doi:10.1016/j.fusengdes.2019.02.060

Assessment of the 3D geometrical effects on the DEMO divertor pumping efficiency
Varoutis, S.; Igitkhanov, Y.; Day, C.
2019. Nuclear materials and energy, 19, 120–123. doi:10.1016/j.nme.2019.02.021

Required and Achievable TBR for the European DEMO
Fischer, U.; Bachmann, C.; Cismondi, F.; Coleman, M.; Day, C.; et al.
2019. 14th International Symposium on Fusion Nuclear Technology (ISFNT 2019), Budapest, Hungary, September 22–27, 2019

Progress of the conceptual design of the European DEMO Breeding Blanket, Tritium Extraction and Coolant Purification Systems
Cismondi, F.; Boccaccini, L. V.; Chiovaro, P.; Ciattaglia, S.; Day, C.; et al.
2019. 14th International Symposium on Fusion Nuclear Technology (ISFNT 2019), Budapest, Hungary, September 22–27, 2019

Investigation of hydrogen gas sorption in thin metal films using a quartz crystal micro balance
Schneidewind, S.; Blaschtschak, J.; Aker, M.; Fleischmann, A.; Gastaldo, L.; et al.
2019. DPG-Frühjahrstagung der Sektion Kondensierte Materie (SKM), Fachverband Dünne Schichten (2019), Regensburg, Germany, March 31–April 5, 2019

Characterization of the KATRIN detector wafers with the iron bird test setup
KATRIN Collaboration; Schmid, S.
2019, March. DPG-Frühjahrstagung, Fachverband Teilchenphysik (2019), Aachen, Germany, March 25–29, 2019

Measurement of KATRINs energy loss function using a time of flight method
KATRIN Collaboration; Sack, R.; Rodenbeck, C.
2019. DPG-Frühjahrstagung, Fachverband Teilchenphysik (2019), Aachen, Germany, March 25–29, 2019

Investigation of detector effects for a sterile neutrino search at KATRIN
KATRIN Collaboration; Korzeczec, M.
2019. DPG-Frühjahrstagung, Fachverband Teilchenphysik (2019), Aachen, Germany, March 25–29, 2019

Ionisation of Pb-210 induced Rydberg atoms in the KATRIN experiment
KATRIN Collaboration; Hinz, D.
2019. DPG-Frühjahrstagung, Fachverband Teilchenphysik (2019), Aachen, Germany, March 25–29, 2019

Results of the commissioning of the gaseous Kr-83m calibration source of KATRIN
KATRIN Collaboration; Seitz-Moskaliuk, H.
2019. DPG-Frühjahrstagung, Fachverband Teilchenphysik (2019), Aachen, Germany, March 25–29, 2019

Determination of analysis plane magnetic field in the KATRIN main spectrometer
KATRIN Collaboration; Block, F.; Osipowicz, A.
2019. DPG-Frühjahrstagung, Fachverband Teilchenphysik (2019), Aachen, Germany, March 25–29, 2019

Improved model for transmission probabilities of edge-welded bellows based on TPMC simulations
Krause, M.; Wolf, J.
2019. DPG-Frühjahrstagung der Sektion Kondensierte Materie (SKM), Fachverband Vakuumphysik und VakuumTechnik (2019), Regensburg, Germany, March 31–April 5, 2019

Technology development for isotope rebalancing and protium removel in the EU-DEMO fuel cycle
Neugebauer, C.; Hörstenmeyer, Y.; Day, C.
2019. 12th International Conference on Tritium Science and Technology (Tritium 2019), Busan, South Korea, April 22–26, 2019

Design of a cryostat for spectroscopic investigation of all hydrogen isotopologues in the liquid phase
Krasch, B.; Größle, R.; Kuntz, D.; Mirz, S.
2019. 12th International Conference on Tritium Science and Technology (Tritium 2019), Busan, South Korea, April 22–26, 2019

High purity HD for cross calibration of hydrogen isotopologue analytics
Größle, R.; Brunst, T.; Krasch, B.; Mirz, S.
2019. 12th International Conference on Tritium Science and Technology (Tritium 2019), Busan, South Korea, April 22–26, 2019

Assessment of the pumping efficiency in DEMO alternative divertor configurations
Varoutis, S.; Igitkhanov, Y.; Day, C.; Innocente, P.; Subba, F.; et al.
2019. 28th IEEE Symposium on Fusion Engineering (SOFE 2019), Ponte Vedra Beach, FL, USA, June 2–6, 2019

Characterisation of REBCO Roebel cables. PhD dissertation
Otten, S. J.
2019. KIT Scientific Publishing. doi:10.5445/KSP/1000091629

Superconducting BaHfO-GdBaCuO Nanocomposite Thin Films: Influence of Growth Temperature and Deposition Rate on Transport Properties
Popov, R.; Erbe, M.; Hänisch, J.; Holzapfel, B.
2019. IEEE transactions on applied superconductivity, 29 (5), Art.-Nr.: 8001005. doi:10.1109/TASC.2019.2892039

HTS crossconductor - a high current conductor for future fusion machines
Wolf, M. J.; Fietz, W. H.; Heller, R.; Weiss, K. P.
2019. Discussion Meeting ’Fusion energy using tokamaks: can development be accelerated?’ (2019), London, United Kingdom, March 26–27, 2019

Assessment of tritium inventory in DEMO steady state burning plasma
Igitkhanov, Y.; Day, C.
2019. 28th IEEE Symposium on Fusion Engineering (SOFE 2019), Ponte Vedra Beach, FL, USA, June 2–6, 2019

Conceptual design of scalable vacuum pump to validate sintered getter technology for future NBI application
Siragusa, M.; Sonato, P.; Visentin, M.; Mura, M.; Siviero, F.; et al.
2019. Fusion engineering and design, 146, 87–90. doi:10.1016/j.fusengdes.2018.11.040

Towards a neutrino mass measurement with the KATRIN experiment
KATRIN Collaboration; Hickford, S.
2019. DPG-Frühjahrstagung, Fachverband Teilchenphysik (2019), Aachen, Germany, March 25–29, 2019

From first tritium data towards neutrino mass measurements with the KATRIN exeriment
KATRIN Collaboration; Schlösser, M.
2019. DPG-Frühjahrstagung der Sektion Materie und Kosmos (SMuK), Fachverband Physik der Hadronen und Kerne (2019), Munich, Germany, March 17–22, 2019

Data aquisition systematic effects for sterile neutrino search at KATRIN
KATRIN Collaboration; Descher, M.
2019, March. DPG-Frühjahrstagung, Fachverband Teilchenphysik (2019), Aachen, Germany, March 25–29, 2019

Operation Experience of the Wendelstein 7-X High-Temperature Superconductor Current Leads
Heller, R.; Bau, H.; Nagel, M.; Rummel, T.
2019. IEEE transactions on applied superconductivity, 29 (6), Art. Nr.: 8603739. doi:10.1109/TASC.2019.2891163

Characterisation of REBCO Roebel cables. PhD dissertation
Otten, S. J.
2019. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000090970

High current variable temperature electrical characterization system for superconducting wires and tapes with continuous sample rotation in a split coil magnet
Lao, M.; Hänisch, J.; Kauffmann-Weiss, S.; Gehring, R.; Fillinger, H.; et al.
2019. Review of scientific instruments, 90 (1), Art. Nr.: 015106. doi:10.1063/1.5078447

Novel method to study strain effect of thin films using a piezoelectric-based device and a flexible metallic substrate
Iida, K.; Sugimoto, Y.; Hatano, T.; Urata, T.; Langer, M.; et al.
2019. Applied physics express, 12 (1), 016503. doi:10.7567/1882-0786/aaf6e6

Influence of Ba²⁺ Consumption and Intermediate Dwelling during Processing of YBa₂Cu₃O₇ Nanocomposite Films
Rijckaert, H.; Hänisch, J.; Pollefeyt, G.; Bäcker, M.; Driessche, I. Van
2019. Journal of the American Ceramic Society, 102 (7), 3870–3878. doi:10.1111/jace.16228

Comparison of 2D simulation models to estimate the critical current of a coated superconducting coil
Liu, Y.; Ou, J.; Grilli, F.; Schreiner, F.; Zermeno, V. M. R.; et al.
2019. Superconductor science and technology, 32 (1), 014001/1–12. doi:10.1088/1361-6668/aae960

Study of the magnetization loss of CORC cables using 3D T-A formulation
Wang, Y.; Zhang, M.; Grilli, F.; Zhu, Z.; Yuan, W.
2019. Superconductor science and technology, 32, 025003/1–13. doi:10.1088/1361-6668/aaf011

Stainless Steel as Substrate Material for High Temperature Superconducting Tapes Processed via the ISD MgO Route
Koenen, T.; Undisz, A.; Otten, S.; Rettenmayer, M.
2019. IEEE transactions on applied superconductivity, 29 (4), Article: 6900309. doi:10.1109/TASC.2018.2872903

Length Uniformity of the Angular Dependences of Ic and n of Commercial REBCO Tapes with Artificial Pinning at 77 K
Kubiczek, K.; Grilli, F.; Kario, A.; Godfrin, A.; Zermeno, V. M. R.; et al.
2019. IEEE transactions on applied superconductivity, 29 (1), Article No.8000309. doi:10.1109/TASC.2018.2854673

Permeator simulation for the EU-DEMO fuel cycle
Hörstenmeyer, Y.; Tosti, S.; Santucci, A.; Bruni, G.
2019. 12th International Conference on Tritium Science and Technology (Tritium 2019), Busan, South Korea, April 22–26, 2019

Design status of the torus vacuum pumping system for tritium processing in the EU-DEMO
Giegerich, T.; Day, C.; Gliss, C.; Hanke, S.; Härtl, T.; et al.
2019. 12th International Conference on Tritium Science and Technology (Tritium 2019), Busan, South Korea, April 22–26, 2019

Sensitivity analysis and dimensioning of reactor-scale Pd/Ag permeators for the tritium extraction and removel system of the EU-HCPB blanket
Antunes, R.; Frances, L.; Incelli, M.; Santucci, A.
2019. 12th International Conference on Tritium Science and Technology (Tritium 2019), Busan, South Korea, April 22–26, 2019

Lithium enrichment needs for fusion and fission applications
Giegerich, T.; Battes, K.; Day, C.
2019. 1st Tritium School (2019), Ljubljana, Slovenia, March 25–28, 2019

Material migration and fuel retention studies during the JET carbon divertor campaigns
JET Contributors; Coad, J. P.; Rubel, M.; Likonen, J.; Bekris, N.; et al.
2019. Fusion engineering and design, 138, 78–108. doi:10.1016/j.fusengdes.2018.10.002

Aufbau des Cryogenic Phase Equilibria Test Stand CryoPHAEQTS
Tamson, J.; Stamm, M.; Grohmann, S.
2019, November 23. Deutsche Kälte- und Klimatagung (DKV 2018), Aachen, Germany, November 21–23, 2018

Comparison of Constitutive Laws for Modeling High-Temperature Superconductors
Sirois, F.; Grilli, F.; Morandi, A.
2019. IEEE transactions on applied superconductivity, 29 (1), Art. Nr.: 8000110. doi:10.1109/TASC.2018.2848219

Research and Technology Development on Superconducting Current Limiting Transformers. PhD dissertation
Hellmann, S.
2019. KIT Scientific Publishing. doi:10.5445/KSP/1000083484

Voll umweltverträglich bei minus 200 Grad - Machbarkeitsstudio des Karlsruher Instituts für Technologie zu supraleitenden Stromtrassen - Campusreport am 07.08.2018
Fuchs, S.; Kottenau, D.
2018. doi:10.5445/DIVA/2018-634

Influence of heat treatment on the microstructure and mechanical properties of alloy 825 at cryogenic temperatures
Sas, J.; Weiss, K. P.; Podany, P.
2018. AISTech - Iron and Steel Technology Conference Proceedings, 1454–1456, Association for Iron and Steel Technology (AISTECH)

High-speed Flywheel Energy Storage System (FESS) for Voltage and Frequency Support in Low Voltage Distribution Networks
Karrari, S.; Noe, M.; Geisbuesch, J.
2018. 3rd IEEE International Conference on Intelligent Energy and Power Systems, IEPS 2018; Kharkiv; Ukraine; 10 September 2018 through 14 September 2018, 176–182, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/IEPS.2018.8559521

A facility for DC breakdown voltage testing of liquid nitrogen up to 325 kV
Fink, S.; Zwecker, V.
2018. VDE-Hochspannungstechnik 2018 - ETG-Fachtagung 11/12/2018 - 11/14/2018 at Berlin, Deutschland

Electrostatic Field Calculations for Liquid Nitrogen Gaps Assuming a Decisive Field Factor
Fink, S.
2018. International Journal of Applied Power Engineering, 7 (1), 65–72. doi:10.11591/ijape.v7.i1.pp65-72

Application of Amorphous Cores to DC-excited Flux-modulated Motors Used for Electric Vehicles
Ou, J.; Liu, Y.; Schiefer, M.; Breining, P.; Doppelbauer, M.; et al.
2018. 2018 IEEE International Conference on Electrical Systems for Aircraft, Railway, Ship Propulsion and Road Vehicles & International Transportation Electrification Conference (ESARS-ITEC), 1–7, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/ESARS-ITEC.2018.8607428

Effect of aging on mechanical properties of 316LN at 4.2 K for fusion applications
Sas, J.; Kauffmann-Weiss, S.; Weiss, K.-P.
2018. Acta metallurgica Slovaca, 24 (4), 287 295. doi:10.12776/ams.v24i4.1140

Improved pinning in Zn doped YBa₂Cu₃O6+δ films
Ackermann, K.; Hänisch, J.; Holzapfel, B.
2018. 31st International Symposium on Superconductivity (ISS 2018), Tsukuba, Japan, December 12–14, 2018

On the growth of Co-doped BaFe₂As₂ thin films on CaF₂
Langer, M.; Meyer, S.; Ackermann, K.; Grünewald, L.; Kauffmann-Weiss, S.; et al.
2018. 31st International Symposium on Superconductivity (ISS 2018), Tsukuba, Japan, December 12–14, 2018

Voltage and frequency support in low voltage distribution networks by a high-speed flywheel enegy storage system (FESS)
Karrari, S.; Noe, M.; Geisbuesch, J.
2018. 10th International Conference on Real-Time Simulation (2018), Paris, France, November 13–16, 2018

Superconducting BaHfO₃ - GdBa₂Cu₃O₇ nanocomposite thin films: influence of growth temperature and deposition rate on transport propterties
Popov, R.; Erbe, M.; Hänisch, J.; Holzapfel, B.
2018. Applied Superconductivity Conference (ASC 2018), Seattle, WA, USA, October 28–November 2, 2018

Compatibility test of common electronics with gaseous tritium
Priester, F.
2018. Fusion engineering and design, 136, 608–611. doi:10.1016/j.fusengdes.2018.03.037

Progress in the design of the superconducting magnets for the EU DEMO
Corato, V.; Bagni, T.; Biancolini, M. E.; Bonifetto, R.; Bruzzone, P.; et al.
2018. Fusion engineering and design, 136, 1597–1604. doi:10.1016/j.fusengdes.2018.05.065

Status of European Union Project FASTGRID
Tixador, P.; Bauer, M.; Bruzek, C. E.; Calleja, A.; Deutscher, G.; et al.
2018. Applied Superconductivity Conference (ASC 2018), Seattle, WA, USA, October 28–November 2, 2018

Thermal-hydraulic analysis of an HTS DEMO TF coil
Lewandowska, M.; Dembkowska, A.; Heller, R.; Wolf, M.
2018. Cryogenics, 96, 125–132. doi:10.1016/j.cryogenics.2018.10.014

Kenngrößen und Anwendungen von Kryopumpen
Day, C.
2018. Handbuch Vakuumtechnik. Ed.: K. Jousten, Vieweg Verlag

Kryotechnik und Kryopumpen
Day, C.
2018. Handbuch Vakuumtechnik. Ed.: K. Jousten, Vieweg Verlag

IEEE WG P2004 Chapter 4 introduction
Geisbüsch, J.; Etinge, E.
2018. IEEE Workshop on Complexity in Engineering (COMPENG 2018), Florence, Italy, October 10–12, 2018

Set-Up of a Dynamic Multi-Purpose Power-Hardware-in-the-Loop System for New Technologies Integration
Geisbuesch, J.; Karrari, S.; Kreideweis, P.; Batista de Sousa, W. T.; Noe, M.
2018. Proceedings of the 2018 IEEE Workshop on Complexity in Engineering (COMPENG), Firenze, I, December 19, 2018, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/CompEng.2018.8536233

Echtzeitsimulation und Tests
Geisbüsch, J.
2018. ES2050 Arbeitstrefffen (2018), Frankfurt am Main, Germany, May 8–9, 2018

Energy Lab 2.0 Overview
Klumpp, M.; Geisbüsch, J.
2018. bw-i Delegation (2018), Karlsruhe, Germany, April 6, 2018

Energy Lab 2.0 and Power Hardware in the Loop: System Integration and Real-time Simulations
Geisbüsch, J.
2018. 2nd Workshop Energy Lab 2.0 meets Neocarbon Energy (2018), Karlsruhe, Germany, March 28–31, 2018

In-situ precipitation of BaHfO3 nanoparticles in REBCO films deposited by TFA-MOD on LZO/CeO2-buffered Ni-5at%W tapes via reel-to-reel process
Freitag, W.; Erbe, M.; Cayado, P.; Falter, M.; Hänisch, J.; et al.
2018. International Topical Workshop on Coated Conductors for Applications (CCA 2018), Vienna, Austria, September 10–13, 2018

Influence of deposition parameters on microstructural and superconducting properties of P and Co-doped Ba122 thin films on MgO
Meyer, S.; Langer, M.; Hänisch, J.; Rijckaert, H.; Aswartham, S.; et al.
2018. Applied Superconductivity Conference (ASC 2018), Seattle, WA, USA, October 28–November 2, 2018

Comparison of different CSD-grown REBCO (RE = Yb, Er, Ho, Y, Dy, Gd, Sm, Nd) compounds with respect to applicability as Coated Conductors
Erbe, M.; Cayado, P.; Freitag, W.; Hänisch, J.; Holzapfel, B.
2018. 31st Symposium on Superconductivity (ISS 2018), Tsukuba, Japan, December 12–14, 2018

Thin film deposition and high-field transport properties of Fe-based superconductors
Hänisch, J.
2018. Institute of Physics, Chinese Academy of Science (2018), Beijing, China, January 22, 2018

Chemical solution deposition of Y₁₋ₓGdₓBa₂Cu₃O –BaHfO₃ nanocomposite films: combined influence of nanoparticles and rare-earth mixing on growth conditions and transport properties
Cayado, P.; Erbe, M.; Kauffmann-Weiss, S.; Jung, A.; Hänisch, J.; et al.
2018. RSC Advances, 8 (74), 42398–42404. doi:10.1039/C8RA09188A

A trapped field of 17.7 T in a stack of high temperature superconducting tape
Patel, A.; Baskys, A.; Mitchell-Williams, T.; McCaul, A.; Coniglio, W.; et al.
2018. Superconductor science and technology, 31 (9), 09LT01. doi:10.1088/1361-6668/aad34c

Production and characterization of strands for a 35 kA HTS DC cable demonstrator
Preuss, A.; Wolf, M.; Heiduk, M.; Lange, C.; Fietz, W.
2018. Applied Superconductivity Conference (ASC 2018), Seattle, WA, Ocober 28 - November 2, 2018

Production and Characterization of Strands for a 35 kA HTS DC Cable Demonstrator
Preuss, A.; Wolf, M. J.; Heiduk, M.; Lange, C.; Fietz, W. H.
2018. Applied Superconductivity Conference (ASC 2018), Seattle, WA, USA, October 28–November 2, 2018

High Temperature Superconductors for Future Fusion Magnets and Industrial High Current Applications
Wolf, M. J.; Preuss, A.; Heller, R.; Lange, C.; Heiduk, M.; et al.
2018. 30th International Symposium on Fusion Technology (SOFT 2018), Giardini-Naxos, Italy, September 16–21, 2018

Mechanical and Electromechanical Properties of REBCO Tapes of Different Manufacturers for Use in HTS High-Current Conductors
Wolf, M. J.; Fietz, W. H.; Hänisch, J.; Jung, A.; Kauffmann-Weiss, S.; et al.
2018. 9th Workshop on Mechanical and Electromagnetic Properties of Composite Superconductors (MEM 2018), Andong, South Korea, June 17–20, 2018

HTS CrossConductor – a High Current Conductor for Future Fusion Machines
Wolf, M. J.; Fietz, W. H.; Heller, R.; Weiss, K. P.
2018. Fusion Energy Using TOKAMAKS (2018), London, United Kingdom, March 26–27, 2018

Status of a Conceptual HTS TF-Coil Design and Progress on HTS CrossConductor Fabrication
Wolf, M. J.; Bagrets, N.; Fietz, W. H.; Heller, R.; Preuß, A.; et al.
2018. 4th HTS4 Fusion Workshop (2018), Nagoya, Japan, March 20–22, 2018

Critical Current Densities of 482 A/mm² in HTS CrossConductors at 4.2 K and 12 T
Wolf, M. J.; Bagrets, N.; Fietz, W. H.; Lange, C.; Weiss, K.-P.
2018. IEEE transactions on applied superconductivity, 28 (4), Article No.4802404. doi:10.1109/TASC.2018.2815767

Characterization of Isothermal Resistivity Curves of HTS Coated Conductors: a Synergy Between Experiment and Simulation
Riva, N.; Richard, S.; Sirois, F.; Lacroix, C.; Dutoit, B.; et al.
2018. Applied Superconductivity Conference (ASC 2018), Seattle, WA, USA, October 28–November 2, 2018

Application of Amorphous Cores to DC-excited Fluxmodulated Motors Used for Electric Vehicles
Ou, J.; Liu, Y.; Schiefer, M.; Breining, P.; Doppelbauer, M.; et al.
2018. 5th International Conference on Electrical Systems for Aircraft, Railway, Ship Propulsion and Road Vehicles and International Transportation Electrification Conference (ESARS-ITEC 2018), Nottingham, United Kingdom, November 7–9, 2018

High-speed Fluorescent Thermal Imaging of a 2G HTS-wound Non-insulated Pancake Coil
Gyuraki, R.; Schreiner, F.; Benkel, T.; Liu, Y.; Sirois, F.; et al.
2018. Applied Superconductivity Conference (ASC 2018), Seattle, WA, USA, October 28–November 2, 2018

Dynamic modeling of levitation of a superconducting bulk by coupled H-magnetic field and arbitrary Lagrangian–Eulerian formulations
Grilli, F.; Morandi, A.; De Silvestri, F.; Brambilla, R.
2018. Applied Superconductivity Conference (ASC 2018), Seattle, WA, USA, October 28–November 2, 2018

Length Uniformity of the Angular Dependences of Ic and n of Commercial (RE)BaCuO Tapes with Artificial Pinning at 77 K
Kubiczek, K.; Grilli, F.; Kario, A.; Godfrin, A.; Zermeno, V. M. R.; et al.
2018. International Topical Workshop on Coated Conductors for Applications (CCA 2018), Vienna, Austria, September 10–13, 2018

Real time simulation of current ramps in large HTS coils: no longer a computational dream
Berrospe-Juarez, E.; Trillaud, F.; Zermeno, V. M. R.; Grilli, F.
2018. International Topical Workshop on Coated Conductors for Applications (CCA 2018), Vienna, Austria, September 10–13, 2018

Application of an Amorphous Core to an Ultra-High-Speed Sleeve-Free Interior Permanent-Magnet Rotor
Liu, Y.; Ou, J.; Schiefer, M.; Breining, P.; Grilli, F.; et al.
2018. IEEE transactions on industrial electronics, 65 (11), 8498–8509. doi:10.1109/TIE.2018.2807418

HTS Roebel cables, a qualiflied solution for advanced high field magnets
Goldacker, W.
2018. International Topical Workshop on Coated Conductors for Applications (CCA 2018), Vienna, Austria, September 10–13, 2018

Coated conductor Roebel cable at magnet applications – past, presence and the future
Kario, A.; Kling, A.; Otten, S.; Goldacker, W.; Usoskin, A.; et al.
2018. Applied Superconductivity Conference (ASC 2018), Seattle, WA, USA, October 28–November 2, 2018

Homogeneity of REBCO coated conductors at 77 K from critical current, current anisotropy and mechanical properties investigations
Kario, A.; Otten, S.; Jakubiec, G.; Kubiczek, K.; Mirasch, U.; et al.
2018. 6th International Conference on Superconductivity and Magnetism (ICSM 2018), Antalya, Turkey, April 29–May 4, 2018

Influence of the HTS Roebel cable architecture on its mechanical and electrical properties
Kario, A.; Otten, S.; Kling, A.; Mirasch, U.; Goldacker, W.
2018. 27th International Cryogenic Engineering Conference and International Cryogenic Materials Conference (ICE/ICMC 2018), Oxford, United Kingdom, September 3–7, 2018

Performance and Quench Characteristics of a Pancake Coil Wound With the 2G YBCO Roebel Cable
Zhang, Q.; Yang, Y.; Young, E.; Cavalucci, L.; Kario, A.; et al.
2018. IEEE transactions on applied superconductivity, 28 (4), Article No.4801005. doi:10.1109/TASC.2018.2799140

Double-Disordered HTS-Coated Conductors and Their Assemblies Aimed for Ultra-High Fields: Large Area Tapes
Usoskin, A.; Betz, U.; Hofacker, F.; Rutt, A.; Schlenga, K.; et al.
2018. IEEE transactions on applied superconductivity, 28 (4), Article No.6602506. doi:10.1109/TASC.2018.2801348

The DEMO fuel cycle - novel technologies for tritium inventory reduction
Day, C.; Giegerich, T.; Butler, B.; Ploeckl, B.
2018. Proceedings of the 27th IAEA Fusion Energy Conference (FEC 2018), Gandhinagar, IND, October 22-27, 2018, FIP/P3–8, IAEA

Progress in the ITER neutral beam test facility
Toigo, V.; Dal Bello, S.; Bigi, M.; Boldrin, M.; Chitarin, G.; et al.
2018. Proceedings of the 27th Fusion Energy Conference (FEC 2018), Gandhinagar, IND, October 22-27, 2018, IAEA-CN-FIP/1–3Rb, IAEA

Metal Foil Pump performance aspects in view of the implementation of Direct Internal Recycling for future fusion fuel cycles
Peters, B. J.; Hanke, S.; Day, C.
2018. Fusion engineering and design, 136, 1467–1471. doi:10.1016/j.fusengdes.2018.05.036

Assessment of the JT-60SA divertor cryopump performance
Luo, X.; Scannapiego, M.; Day, C.; Sakurai, S.
2018. Fusion engineering and design, 136, 467–471. doi:10.1016/j.fusengdes.2018.02.099

Effect of neutral leaks on pumping efficiency in 3D DEMO divertor configuration
Varoutis, S.; Igitkhanov, Y.; Day, C.; Strobel, H.; Wenninger, R.
2018. Fusion engineering and design, 136, 1135–1139. doi:10.1016/j.fusengdes.2018.04.089

A preliminary assessment of the vacuum performance in the beamline during IFMIF-DONES operation
Hauer, V.; Day, C.
2018. Fusion engineering and design, 136, 1063–1067. doi:10.1016/j.fusengdes.2018.03.038

DEMO design activity in Europe: Progress and updates
Federici, G.; Bachmann, C.; Barucca, L.; Biel, W.; Boccaccini, L.; et al.
2018. Fusion engineering and design, 136, 729–741. doi:10.1016/j.fusengdes.2018.04.001

Research and Technology Development on Superconducting Current Limiting Transformers. PhD dissertation
Hellmann, S.
2018. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000088555

Dynamic behavior emulation of alkaline electrolyzer by power-hardware-in-The-loop
Kosonen, A.; Koponen, J.; Ruuskanen, V.; Niemela, M.; Ahola, J.; et al.
2018. 2018 20th European Conference on Power Electronics and Applications (EPE’18 ECCE Europe): Proceedings of a meeting held 17-21 September 2018, Riga, Latvia, Art.-Nr.: 8515612, Institute of Electrical and Electronics Engineers (IEEE)

Arbeitsschutzmanagementsysteme - Impact on Society
Bauer, K.
2018. UKBW Seminar ’Sicherheit und Gesundheitsschutz bei der Arbeit nachhaltig gestalten’ (2018), Rauenberg, Germany, November 21, 2018

Erhöhung der Funktionssicherheit durch permanentes Monitoring von Prozessventilen
Müller-Heinzerling, T.; Schulz, P.; Bobien, S.
2018. Jahrestagung des Deutschen Kälte- und Klimatechnischen Vereins (DKV 2018), Aachen, Germany, November 21–23, 2018

High-speed flywheel energy storage system (FESS) for frequency and voltage support in low voltage distribution grids
Karrari, S.; Noe, M.; Geisbüsch, J.
2018. 8th International Conference on the Integration of Renewable and Distributed Energy Resources (IRED 2018), Vienna, Austria, October 16–19, 2018

BaHfO₃-doped GdBCO superconducting thin films: influence of the dopant amount and growth temperature on transport properties
Popov, R.; Hänisch, J.; Holzapfel, B.
2018. Applied Superconductivity Conference (ASC 2018), Seattle, WA, USA, October 28–November 2, 2018

Transient simulation and recovery time of a three-phase concentric HTS-cable
Sousa, W. T. B. de; Kottonau, D.; Noe, M.
2018. Applied Superconductivity Conference (ASC 2018), Seattle, WA, USA, October 28–November 2, 2018

Simulation model for no-insulation superconducting coils to estimate the critical current
Liu, Y.; Schreiner, F.; Gyuraki, R.; Grilli, F.; Noe, M.; et al.
2018. Applied Superconductivity Conference (ASC 2018), Seattle, WA, USA, October 28–November 2, 2018

Technology development towards a superconducting DC wind generator
Liu, Y.; Schreiner, F.; Grilli, F.; Noe, M.; Doppelbauer, M.
2018. Applied Superconductivity Conference (ASC 2018), Seattle, WA, USA, October 28–November 2, 2018

Technology development of a superconducting stator system for offshore wind turbines
Schreiner, F.; Liu, Y.; Noe, M.; Doppelbauer, M.
2018. Applied Superconductivity Conference (ASC 2018), Seattle, WA, USA, October 28–November 2, 2018

Real-time simulation and power-hardware-in-the-loop test of an air-coil superconducting fault current limiter
Geisbüsch, J.; Kaiser, F.; Sousa, W. B. T. de; Noe, M.
2018. Applied Superconductivity Conference (ASC 2018), Seattle, WA, USA, October 28–November 2, 2018

Fiber Bragg grating sensors to measure thermal distribution in a 10 MW SUPRAPOWER offshore wind turbine
Ramalingam, R.; Sun, J.; Neumann, H.
2018. IEEE Sensors (2018), New Delhi, India, October 28–31, 2018

Experimental investigation of the ideal selectivity of MFI-ZSM-5 zeolite-type membranes for a first evaluation of the separation of hydrogen isotopologues from helium
Antunes, R.; Böhmländer, A.; Bükki-Deme, A.; Krasch, B.; Cruz, M. M.; et al.
2018. Separation and purification technology, 212, 767–773. doi:10.1016/j.seppur.2018.11.088

Heat transfer and pressure drop in the main heat exchanger of a cryogenic mixed refrigerant cycle
Gomse, D.; Grohmann, S.
2018, September 5. 27th International Cryogenic Engineering Conference and International Cryogenic Materials Conference (ICE/ICMC 2018), Oxford, United Kingdom, September 3–7, 2018

Status of a European Standard for the protection of helium cryostats against excessive pressure
Weber, C.; Grohmann, S.
2018, November 23. Deutsche Kälte- und Klimatagung (DKV 2018), Aachen, Germany, November 21–23, 2018

Untersuchungen zur Wärmeübertragung in Helium-Kryostaten nach Bruch des Isolationsvakuums
Weber, C.; Schirle, S.; Grohmann, S.
2018, November 22. Deutsche Kälte- und Klimatagung (DKV 2018), Aachen, Germany, November 21–23, 2018

Study on the heat transfer of helium cryostats following loss of insulating vacuum
Weber, C.; Henriques, A.; Grohmann, S.
2018, September 4. 27th International Cryogenic Engineering Conference and International Cryogenic Materials Conference (ICE/ICMC 2018), Oxford, United Kingdom, September 3–7, 2018

Herausforderungen an die Auslegung von Druckentlastungseinrichtungen in Tieftemperaturanlagen
Weber, C.
2018, April 24. 4. CSE Sicherheitstage, Wangerooge, 23.-25.04.2018

Field test results of self-calibrating cryogenic mass flow meter WEKA-Sense
Erni, P.; Boersch, M.; Consogno, G.; Okanovic, M.; Grohmann, S.; et al.
2018, September 5. 27th International Cryogenic Engineering Conference and International Cryogenic Materials Conference (ICE/ICMC 2018), Oxford, United Kingdom, September 3–7, 2018

Cryogenic pressure relief valve sizing tool
Henriques, A.; Weber, C.; Grohmann, S.
2018, September 5. 27th International Cryogenic Engineering Conference and International Cryogenic Materials Conference (ICE/ICMC 2018), Oxford, United Kingdom, September 3–7, 2018

Use of the buffer layers as a current flow diverter in 2G HTS coated conductors
Fournier-Lupien, J.-H.; Lacroix, C.; Hellmann, S.; Huh, J.; Pfeiffer, K.; et al.
2018. Superconductor science and technology, 31 (12), 125019. doi:10.1088/1361-6668/aae2cd

Status of a European Standard for the protection of helium cryostats against excessive pressure
Grohmann, S.
2018, September 4. 27th International Cryogenic Engineering Conference and International Cryogenic Materials Conference (ICE/ICMC 2018), Oxford, United Kingdom, September 3–7, 2018

Set-up of the cryogenic phase equilibria test stand CryoPHAEQTS
Tamson, J.; Stamm, M.; Grohmann, S.
2018, September 5. 27th International Cryogenic Engineering Conference and International Cryogenic Materials Conference (ICE/ICMC 2018), Oxford, United Kingdom, September 3–7, 2018

Analysis of the EU-DEMO fuel cycle elements: Intrinsic impact of technology choices
Hörstensmeyer, Y. N.; Butler, B.; Day, C.; Franza, F.
2018. Fusion engineering and design, 136A, 314–318. doi:10.1016/j.fusengdes.2018.02.015

Dynamic modeling of levitation of a superconducting bulk by coupled H-magnetic field and arbitrary Lagrangian–Eulerian formulations
Grilli, F.; Morandi, A.; De Silvestri, F.; Brambilla, R.
2018. Superconductor science and technology, 31 (12), 125003. doi:10.1088/1361-6668/aae426

A facility for DC breakdown voltage testing of liquid nitrogen up to 325 kV
Fink, S.; Zwecker, V.
2018. 2. Fachtagung Hochspannungstechnik (2018), Berlin, Germany, November 12–14, 2018

Development of 10 kA current leads cooled by a cryogenic mixed-refrigerant cycle
Shabagin, E.; Grohmann, S.
2018. 27th International Cryogenic Engineering Conference and International Cryogenic Materials Conference (ICE/ICMC 2018), Oxford, United Kingdom, September 3–7, 2018

Integration of energy storage systems into distribution grids: a high-speed flywheel energy storage system
Karrari, S.; Noe, M.; Geisbuesch, J.
2018. 2nd Workshop Energy Lab 2.0 meets Neocarbon Energy (2018), Karlsruhe, Germany, March 28–31, 2018

Frequency and voltage support by a high-speed flywheel energy storage system (FESS): A real-time simulation for hardware-in-the-loop (HIL) testing
Karrari, S.; Noe, M.; Geisbuesch, J.
2018. IEEE Workshop on Complexity in Engineering (COMPENG 2018), Florence, Italy, October 10–12, 2018

Progress in the ITER neutral beam test facility
Toigo, V.; Boilson, D.; Bonicelli, T.; Chakraborty, A.; Kashiwagi, M.; et al.
2018. 27th IAEA Fusion Energy Conference (FEC 2018), Gāndhināgar, India, October 22–27, 2018

Mass-dependent time- and spatial focusing of ions in a radio frequency electric deflector: basic principles and application to the stereodynamics of chemical reactions
Schlösser, M.; Gonzalez Urena, A.
2018. Stereodynamics 2018, Arosa, CH, September 2-7, 2018

High-speed flywheel energy storage system (FESS) for voltage and frequency support by in low voltage distribution networks
Karrari, S.; Noe, M.; Geisbuesch, J.
2018. 3rd International Conference on Intelligent Energy and Power Systems (IEPS 2018), Kharkiv, Ukraine, September 10–14, 2018

The KATRIN superconducting magnets: Overview and first performance results
KATRIN Collaboration; Arenz, M.; Baek, W.-J.; Beck, M.; Beglarian, A.; et al.
2018. Journal of Instrumentation, 13 (8), T08005. doi:10.1088/1748-0221/13/08/T08005

Vortex glass-liquid transition and activated flux motion in an epitaxial, superconducting NdFeAs(O,F) thin film
Hänisch, J.; Iida, K.; Ohmura, T.; Matsumoto, T.; Hatano, T.; et al.
2018. MRS communications, 8 (4), 1433–1438. doi:10.1557/mrc.2018.207

A facility for DC breakdwn voltage testing of liquid nitrogen up to 325 keV
Fink, S.; Zwecker, V.
2018. 2. Fachtagung Hochspannungstechnik (2018), Berlin, Germany, November 12–14, 2018

Supraleitende Materialien für Energie- und Detektoranwendungen
Kauffmann-Weiß, S.
2018. Werkstoffseminar, Adelboden, CH (2018), Adelboden, Switzerland, March 7, 2018

Tritium technology for the KATRIN experiment
KATRIN Collaboration; Schlösser, M.
2018. ECT-Workshop "Determination of the absolute electron (anti)-neutrino mass" (2018), Trento, Italy, March 26–30, 2018

Spectroscopy of the first electrons from the KATRIN tritium source
KATRIN Collaboration; Schlösser, M.
2018. 39th International Conference on High Energy Physics (ICHEP 2018), Seoul, South Korea, July 4–7, 2018

Advanced long-length GdBaCuO tapes with high homogeneity and mechanical-electrical performance for DC-FCL applications
Kauffmann-Weiss, S.; Lao, M.; Gyuraki, R.; Pham, Q.; Otten, S.; et al.
2018. International Topical Workshop on Coated Conductors for Applications (CCA 2018), Vienna, Austria, September 10–13, 2018

Calibration strategy and status of tritium purity monitoring for KATRIN
KATRIN Collaboration; Niemes, S.; Zeller, G.
2018. XXVIII International Conference on Neutrino Physics and Astrophysics (Neutrino 2018), Heidelberg, Germany, June 4–9, 2018

Contact-free determination of tritium contamination on and below of metal surfaces by beta induced X-ray spectrometry
Hasselmann, L.; Schlösser, M.; Aker, M.; Schäfer, S.; Röllig, M.
2018. 8. Rradiochemischer Analytik-Workshop (RCA 2018), Dresden, Germany, June 12–14, 2018

Assessment of the performance of a 20 kA REBCO current lead
Zappatore, A.; Heller, R.; Savoldi, L.; Zanino, R.
2018. Cryogenics, 95, 95–101. doi:10.1016/j.cryogenics.2018.09.003

Reduction of stored-particle background by a magnetic pulse method at the KATRIN experiment
KATRIN Collaboration; Arenz, M.; Baek, W.-J.; Bauer, S.; Beck, M.; et al.
2018. The European physical journal / C, 78 (9), Art.Nr.: 778. doi:10.1140/epjc/s10052-018-6244-8

Overview of DEMO technology and scenario design activities in Europe
Maviglia, F.; Federici, G.; Siccinio, M.; Albanese, R.; Ambrosino, R.; et al.
2018. 2nd Asia-Pacific Conference on Plasma Physics (AAPPS-DPP 2018), Kanazawa, Japan, November 12–17, 2018

The HTS CrossConductor as a potential candidate for a fusion magnet
Heller, R.; Fietz, W. H.; Weiss, K.-P.; Wolf, M. J.
2018. 5th IAEA DEMO Programme Workshop (2018), daeje, South Korea, May 7–10, 2018

Verification of failure criteria for CFRP composites under cryogenic thermo-mechanical loading
Hohe, J.; Fliegener, S.; Weiss, K.-P.; Appel, S.
2018. European Conference on Spacecraft Structures, Materials and Environmental Testing (2018), Noordwijk, Netherlands, May 28–June 1, 2018

Mechanical stability of HTS CroCos and structure material boundaries
Weiss, K.-P.; Bagrets, N.; Fietz, W. H.; Heller, R.; Sas, J.; et al.
2018. 9th Workshop on Mechanical and Electromagnetic Properties of Composite Superconductors (MEM 2018), Andong, South Korea, June 17–20, 2018

A critical assessment of the issues in the thermal modeling of an HTS CroCo conductor for the EU DEMO TF coils
Zappatore, A.; Fietz, W. H.; Heller, R.; Savoldi, L.; Wolf, M. J.; et al.
2018. 6th International Workshop on Numerical Modelling of High Temperature Superconductors (HTS 2018), Caparica, Portugal, June 26–29, 2018

Recent Roebel cable progress
Kario, A.; Otten, S.; Kling, A.; Nast, R.; Mirasch, U.; et al.
2018. IEEE Low Temperature Superconductor Workshop (LTSW 2018), Jacksonville, FL, USA, February 11–14, 2018

Evolution of microstructure and mechanical properties at cryogenic temperatures of 316L processed by powder bed fusion
Sas, J.; Weiss, K.-P.; Diego, M.; Calignano, F.; Bidulsky, R.; et al.
2018. World Conference on Powder Metallurgy (World PM2018 2018), Beijing, China, September 16–20, 2018

Fueling DEMO: required flux and pellet injection parameters
Pégourié, B.; Artaud, J. F.; Garcia, J.; Day, C.; Lang, P. T.
2018. 45th Conference on Plasma Physics (EPS 2018), Prague, Czechia, July 2–6, 2018

Influence of heat treatment on the microstructure and mechanical properties of 825 alloy at cryogenic temperatures
Sas, J.; Weiss, K. P.; Podany, P.
2018. Transactions of the American Nuclear Society, 118 (1), 1454–1456

Influence of heat treatment on the microstructure and mechanical properties of 825 alloy at cryogenic temperatures
Sas, J.; Weiss, K. P.; Podany, P.
2018. American Nuclear Society Annual Meeting (2018), Philadelphia, PA, USA, June 17–21, 2018

Experimental investigation of the ideal selectivity of MFI-ZSM5 zeolite-type membranes for the separation of hydrogen isotopes from helium
Antunes, R.; Böhmländer, A.; Bükki-Deme, A.; Frances, L.; Krasch, B.
2018. 15th International Conference on Inorganic Membranes (ICIM 2018), Dresden, Germany, June 18–22, 2018

Combined transfer of liquid hydrogen and electrical power by hydrogen-electric transfer lines (HyETrans)
Fietz, W. H.; Wolf, M. J.; Weiss, K.-P.
2018. Power2Gas Conference (2018), Copenhagen, Denmark, October 17–18, 2018

Suitability assessment of different REBCO compounds (RE = Yb, Er, Ho, Y, Dy, Gd, Sm, Nd) for the fabrication of CSD-based coated conductors
Erbe, M.; Cayado, P.; Freitag, W.; Holzapfel, B.; Hänisch, J.
2018. International Topical Workshop on Coated Conductors for Applications (CCA 2018), Vienna, Austria, September 10–13, 2018

Superconducting magnets for fusion
Fietz, W. H.
2018. ESAS/EASITrain Summer School on Applied Superconductivity (2018), Vienna, Austria, September 3–7, 2018

Metal foil pump - on the way for new applications of metal-hydrogen interaction in nuclear fusion
Hanke, S.; Peters, B. J.; Day, C.
2018. 16th International Symposium on Metal-Hydrogen Systems (2018), Guangzhou, China, October 28–November 2, 2018

Dynamic behavior emulation of alkaline electrolyzer by power-hardware-in-the-loop
Kosonen, A.; Koponen, J.; Ruuskanen, V.; Niemelä, M.; Ahola, J.; et al.
2018. 20th European Conference on Power Electronics and Applications (EPE`23 ECCE Europe 2018), Riga, Latvia, September 17–21, 2018

Set-up of a dynamic multi-purpose power-hardware-in-the-loop system for new technologies integration
Geisbüsch, J.; Karrari, S.; Kreideweis, P.; Sousa, W. B. T. de; Noe, M.
2018. IEEE Workshop on Complexity in Engineering (COMPENG 2018), Florence, Italy, October 10–12, 2018

Performance prediction approaches for liquid vacuum pumps with mercury as working fluid
Ochoa Guamán, S.; Giegerich, T.; Dahlke, C.; Day, C.
2018. 64th AVS International Symposium and Exhibition, Tampa, FL, October 29 - November 3, 2017

Monte Carlo simulation of a dynamic sieve system
Luo, X.; Day, C.
2018. 31st International Symposium on Rarefied Gas Dynamics (2018), Glasgow, United Kingdom, July 23–27, 2018

Assessment iof the Ic(B,T,Θ) characteristics of PLD-GdBCO tape with coumnar BaSnO₃ nanoprecipitates
Lao, M.; Hänisch, J.; Molodyk, A.; Chepikov, V.; Lee, S.; et al.
2018. International Topical Workshop on Coated Conductors for Applications (CCA 2018), Vienna, Austria, September 10–13, 2018

Applying OPAL-RT products in our laboratories: Past, present and future
Geisbüsch, J.; Karrari, S.; Kreideweis, P.; Sousa, W. B. T. de; Noe, M.
2018. OPAL-RT Germany Inauguration, Nürnberg, July 5, 2018

Preparation of YₓGd₁₋ₓBa₂Cu₃O₇₋ₓ superconducting nanocomposite films by chemical solution deposition
Cayado, P.; Erbe, M.; Kauffmann-Weiss, S.; Jung, A.; Hänisch, J.; et al.
2018. European Advanced Materials Congress (EAMC 2018), Stockholm, Sweden, August 20–23, 2018

Commissioning and characterization of the tritium gas circulation system of the KATRIN experiment
KATRIN Collaboration; Krasch, B.; Marsteller, A.
2018. XXVIII International Conference on Neutrino Physics and Astrophysics (Neutrino 2018), Heidelberg, Germany, June 4–9, 2018

Bewertung des Einsatzes von supraleitenden 380kV Kabeln
Stagge, H.; Kottonau, D.; Noe, M.
2018. ZIEHL VI Tagung (2018), Berlin, Germany, March 20–21, 2018

High speed flywheel energy storage systems for voltage support in low voltage networks
Karrari, S.; Noe, M.; Geisbuesch, J.
2018. 661. Nonlinear Dynamics, Optimization and Control of Distributed Energy Systems (2018), Bad Honnef, Germany, January 29–31, 2018

Real-time simulation of high-speed flywheel energy storage system (FESS) for distribution networks
Karrari, S.; Noe, M.; Geisbuesch, J.
2018. 9th ACM International Conference on Future Energy Systems (e-Energy 2018), Karlsruhe, Germany, June 12–15, 2018

The DEMO fuel cycle - innovative technologies for tritium inventory reduction
Day, C.; Butler, B.; Federici, G.; Giegerich, T.; Ploeckl, B.
2018. 23rd Topical Meeting on the Technology of Fusion Energy (TOFE 2018), Orlando, FL, USA, November 11–15, 2018

High temperature superconductors for future fusion power plants
Fietz, W. H.; Wolf, M. J.; Preuss, A.; Heller, R.; Bagrets, N.; et al.
2018. 23rd Topical Meeting on the Technology of Fusion Energy (TOFE 2018), Orlando, FL, USA, November 11–15, 2018

Electro-mechanical characterization of superconductors
Bagrets, N.; Weiss, K.-P.; Wolf, M. J.; Heller, R.; Fietz, W. H.
2018. 2nd International School on Numerical Modelling for Applied Superconductivity (2018), Caparica, Portugal, July 2–6, 2018

Comparison of 2D simulation models to estimate the critical current of a superconducting doule pancake coil
Liu, yingzhen; Ou, J.; Grilli, F.; Schreiner, F.; Noe, M.; et al.
2018. 6th International Workshop on Numerical Modelling of High Temperature Superconductors (HTS 2018), Caparica, Portugal, June 26–29, 2018

CSD-grown superconducting GdBa₂Cu₃O7-δ nanocomposite films: a comparison between in situ and ex situ nanoparticle formation
Cayado, P.; Rijckaert, H.; Erbe, M.; Lao, M.; Jung, A.; et al.
2018. Materials Science and Engineering Congress (MSE 2018), Darmstadt, Germany, September 26–28, 2018

High quality epitaxial NdFeAs(O,F) films by molecular beam epitaxy: Influence of film thickness on transport properties
Kauffmann-Weiss, S.; Iida, K.; Ohmura, T.; Matsumoto, T.; Hatano, T.; et al.
2018. Materials Science and Engineering Congress (MSE 2018), Darmstadt, Germany, September 26–28, 2018

Power-hardware-in-the-loop operation of a purpose-built air-coil superconducting fault current limiter
Geisbüsch, J.; Kaiser, F.; Sousa, W. .. B. de; Noe, M.
2018. 6th International Workshop on Numerical Modelling of High Temperature Superconductors (HTS 2018), Caparica, Portugal, June 26–29, 2018

A finite element method framework for modeling rotating machines with superconducting windings
Brambilla, R.; Grilli, F.; Martini, L.; Bocchi, M.; Angeli, G.
2018. 6th International Workshop on Numerical Modelling of High Temperature Superconductors (HTS 2018), Caparica, Portugal, June 26–29, 2018

Comparison of constitutive laws for modeling high-temperature superconductors
Sirois, F.; Grilli, F.; Morandi, A.
2018. 6th International Workshop on Numerical Modelling of High Temperature Superconductors (HTS 2018), Caparica, Portugal, June 26–29, 2018

Thermal analysis of a cryogenic distillation column for H2 isotopes separation
Ana, G.; Ana, R. A.
2018. 30th International Symposium on Fusion Technology (SOFT 2018), Giardini-Naxos, Italy, September 16–21, 2018

Commissioning of multi-nozzle vacuum sieve tray at the tritium laboratory Karlsruhe
Diaz-Alvarez, E.; Frances, L.
2018. 30th International Symposium on Fusion Technology (SOFT 2018), Giardini-Naxos, Italy, September 16–21, 2018

Recent achievements of the Pd-Ag membrane technologies in tritium extraction system applications
Santucci, A.; Incelli, M.; Antunes, R.; Espirito Santo, C.; Ecclesia, M. V.; et al.
2018. 30th International Symposium on Fusion Technology (SOFT 2018), Giardini-Naxos, Italy, September 16–21, 2018

Numerical study and experimental verification of protium permeation through Pd/Ag membranes for fusion applications
Antunes, R.; Frances, L.; Incelli, M.; Santucci, A.
2018. 30th International Symposium on Fusion Technology (SOFT 2018), Giardini-Naxos, Italy, September 16–21, 2018

Heat transfer and pressure drop in the main heat exchanger of a cryogenic mixed refrigerant cycle
Gomse, D.; Grohmann, S.
2018. 27th International Cryogenic Engineering Conference and International Cryogenic Materials Conference (ICE/ICMC 2018), Oxford, United Kingdom, September 3–7, 2018

Design and implementation of instrumentation and sensor system for testing sub modelled 10 MW offshore superconducting wind turbine
Ramalingam, R.; Sun, J.; Neumann, H.
2018. 27th International Cryogenic Engineering Conference and International Cryogenic Materials Conference (ICE/ICMC 2018), Oxford, United Kingdom, September 3–7, 2018

Study on the heat transfer of helium crystals following loss of insulating vacuum
Weber, C.; Henriques, A.; Grohmann, S.
2018. 27th International Cryogenic Engineering Conference and International Cryogenic Materials Conference (ICE/ICMC 2018), Oxford, United Kingdom, September 3–7, 2018

Implementation and exploitaion of JET enhancements in preparation for DT operation and next step devices
JET Contributors; Murari, A.; Bekris, N.; Figueiredo, J.; Kim, H. T.; et al.
2018. 30th International Symposium on Fusion Technology (SOFT 2018), Giardini-Naxos, Italy, September 16–21, 2018

Initial integration concept of the DEMO lower horizontal port
Gliss, C.; Giegerich, T.; Flammini, D.; Jimenez, S.; Maviglia, F.; et al.
2018. 30th International Symposium on Fusion Technology (SOFT 2018), Giardini-Naxos, Italy, September 16–21, 2018

HTS CroCo - demonstration of long length fabrication
Preuss, A.; Wolf, M. J.; Bagrets, N.; Fietz, W. H.; Heiduk, M.; et al.
2018. 30th International Symposium on Fusion Technology (SOFT 2018), Giardini-Naxos, Italy, September 16–21, 2018

Conceptual design of a toroidal field coil using HTS crossconductor
Heller, R.; Fietz, W. H.; Vogel, T.; Weiss, K. P.; Wolf, M. J.
2018. 30th International Symposium on Fusion Technology (SOFT 2018), Giardini-Naxos, Italy, September 16–21, 2018

Preliminary configuration of the torus vacuum pumping system installed in the DEMO lower port
Giegerich, T.; Day, C.; Gliss, C.; Luo, X.; Strobel, H.; et al.
2018. 30th International Symposium on Fusion Technology (SOFT 2018), Giardini-Naxos, Italy, September 16–21, 2018

Characterization of ZAO® sintered getter material foruse in fusion applications
Siviero, F.; Caruso, L.; Porcelli, T.; Mura, M.; Maccallini, E.; et al.
2018. 30th International Symposium on Fusion Technology (SOFT 2018), Giardini-Naxos, Italy, September 16–21, 2018

Continuous and cryogen-free isotope separation for DEMO
Neugebauer, C.; Day, C.
2018. 30th International Symposium on Fusion Technology (SOFT 2018), Giardini-Naxos, Italy, September 16–21, 2018

Effect of plasma screening on pumping efficiency in the DEMO divertor
Igitkhanov, Y.; Varoutis, S.; Day, C.
2018. 30th International Symposium on Fusion Technology (SOFT 2018), Giardini-Naxos, Italy, September 16–21, 2018

Qualification of ITER poloidal-field coil cryogenic components
Weiss, K.-P.; Fink, S.; Gafert, J.; Heikkinen, S.; Penco, R.; et al.
2018. 30th International Symposium on Fusion Technology (SOFT 2018), Giardini-Naxos, Italy, September 16–21, 2018

On the path towards a metal foil pump - latest results and new experimental facility
Hanke, S.; Peters, B. J.
2018. 30th International Symposium on Fusion Technology (SOFT 2018), Giardini-Naxos, Italy, September 16–21, 2018

A quasi-3D thermal-hydraulic model for an HTS CroCo conductor
Zappatore, A.; Fietz, W. H.; Heller, R.; Savoldi, L.; Wolf, M. J.; et al.
2018. 30th International Symposium on Fusion Technology (SOFT 2018), Giardini-Naxos, Italy, September 16–21, 2018

BaHfO₃ nanoparticles in REBa₂Cu₃O₇₋ₓ films deposited by reel-to-reel TFA-MOD and CeO₂-buffered Ni-5at% W tapes
Freitag, W.; Erbe, M.; Cayado, P.; Falter, M.; Hänisch, J.; et al.
2018. Applied Superconductivity Conference (ASC 2018), Seattle, WA, USA, October 28–November 2, 2018

High speed fluorescent thermal imaging of a 2G HTS-wound non-insulated pancake coil
Gyuráki, R.; Sirois, F.; Grilli, F.
2018. Applied Superconductivity Conference (ASC 2018), Seattle, WA, USA, October 28–November 2, 2018

Status of EC project FASTGRID
Tixador, P.; Bauer, M.; Bruzek, C.; Calleja, A.; Deutscher, G.; et al.
2018. Applied Superconductivity Conference (ASC 2018), Seattle, WA, USA, October 28–November 2, 2018

Combination of different types of pinning mechanisms for performance enhancements in (RE¹, RE², RE³, REsupra(n))Ba₂Cu₃O7-δ superconducting nanocomposite films
Cayado, P.; Lao, M.; Erbe, M.; Hänisch, J.; Holzapfel, B.
2018. Applied Superconductivity Conference (ASC 2018), Seattle, WA, USA, October 28–November 2, 2018

Electromechanical properties of cabled HTS crossconductors
Wolf, M. J.; Bagrets, N.; Fietz, W. H.; Heiduk, M.; Heller, R.; et al.
2018. Applied Superconductivity Conference (ASC 2018), Seattle, WA, USA, October 28–November 2, 2018

Flux pinning and critical current densities in (Li,Fe)OHFeSe thin films
Hänisch, J.; Huang, Y.; Tian, J. P.; Yuan, J.; Zhou, F.; et al.
2018. Applied Superconductivity Conference (ASC 2018), Seattle, WA, USA, October 28–November 2, 2018

Superconducting 380 kV cable as an opportunity for partial underground cabling projects
Kottonau, D.; Sousa, W. B. T. de; Geisbüsch, J.; Stagge, H.; Noe, M.
2018. Applied Superconductivity Conference (ASC 2018), Seattle, WA, USA, October 28–November 2, 2018

Probing the angular dependence of Ic of PLD-GdBCO coated conductors at intermediate temepratures of 10-40 K
Lao, M.; Hänisch, J.; Molodyk, A.; Holzapfel, B.
2018. Applied Superconductivity Conference (ASC 2018), Seattle, WA, USA, October 28–November 2, 2018

Quench analysis of the HTS crossconductor for a toroidal field coil
Heller, R.; Blanchier, P.; Fietz, W. H.; Wolf, M. J.
2018. Applied Superconductivity Conference (ASC 2018), Seattle, WA, USA, October 28–November 2, 2018

Design of a Superconducting DC Demonstrator for Wind Generators
Liu, Y.; Ou, J.; Schreiner, F.; Lao, M.; Noe, M.; et al.
2018. IEEE transactions on energy conversion, 33 (4), 1955–1964. doi:10.1109/TEC.2018.2846721

High temperature superconductors for fusion magnets
Bruzzone, P.; Fietz, W. H.; Minervini, J. V.; Novikov, M.; Yanagi, N.; et al.
2018. Nuclear fusion, 58 (10), 103001. doi:10.1088/1741-4326/aad835

Pushing the limits of applicability of REBCO coated conductor films through fine chemical tuning and nanoengineering of inclusions
Rizzo, F.; Augieri, A.; Kursumovic, A.; Bianchetti, M.; Opherden, L.; et al.
2018. Nanoscale, 10 (17), 8187–8195. doi:10.1039/C7NR09428K

Search for beyond the standard model Higgs bosons decaying into a b b ¯ pair in pp collisions at √s=13 TeV
CMS Collaboration; Sirunyan, A. M.; Tumasyan, A.; Adam, W.; Ambrogi, F.; et al.
2018. Journal of high energy physics, 2018 (8), Article no: 113. doi:10.1007/JHEP08(2018)113

The Aerosol Deposition Method: A modified aerosol generation unit to improve coating quality
Hanft, D.; Glosse, P.; Denneler, S.; Berthold, T.; Oomen, M.; et al.
2018. Materials, 11 (9), Art. Nr.: 1572. doi:10.3390/ma11091572

Fe-based superconducting thin films on metallic substrates: Growth, characteristics, and relevant properties
Iida, K.; Hänisch, J.; Tarantini, C.
2018. Applied physics reviews, 5 (3), Art. Nr.: 031304. doi:10.1063/1.5032258

Influence of artificial pinning centers on structural and superconducting properties of thick YBCO films on ABAD-YSZ templates
Pahlke, P.; Sieger, M.; Ottolinger, R.; Lao, M.; Eisterer, M.; et al.
2018. Superconductor science and technology, 31 (4), 044007. doi:10.1088/1361-6668/aaafbe

The tritium extraction and removal system for the DCLL-DEMO fusion reactor
Garcinuno, B.; Rapisarda, D.; Antunes, R.; Utili, M.; Fernández-Berceruelo, I.; et al.
2018. Nuclear fusion, 58 (9), Art. Nr.: 095002. doi:10.1088/1741-4326/aacb89

Iterative multi-scale method for estimation of hysteresis losses and current density in large-scale HTS systems
Berrospe-Juarez, E.; Zermeño, V. M. R.; Trillaud, F.; Grilli, F.
2018. Superconductor science and technology, 31 (9), 095002. doi:10.1088/1361-6668/aad224

Real-time simulation of high-speed flywheel energy storage system (FESS) for distribution networks
Karrari, S.; Noe, M.; Geisbuesch, J.
2018. 9th ACM International Conference on Future Energy Systems, e-Energy 2018; Karlsruhe; Germany; 12 June 2018 through 15 June 2018, 388–390, Association for Computing Machinery (ACM). doi:10.1145/3208903.3212034

Peculiarities of deformation of CoCrFeMnNi at cryogenic temperatures
Tirunilai, A. S.; Sas, J.; Weiss, K.-P.; Chen, H.; Szabo, D. V.; et al.
2018. Journal of materials research, 1–14. doi:10.1557/jmr.2018.252

Superconducting magnetic bearings simulation using an H-formulation finite element model
Quéval, L.; Liu, K.; Yang, W.; Zermeño, V. M. R.; Ma, G.
2018. Superconductor science and technology, 31 (8), 084001. doi:10.1088/1361-6668/aac55d

Tritium resources available for fusion reactors
Kovari, M.; Coleman, M.; Cristescu, I.; Smith, R.
2018. Nuclear fusion, 58 (2), Art. Nr.: 026010. doi:10.1088/1741-4326/aa9d25

Power dissipation in HTS coated conductor coils under the simultaneous action of AC and DC currents and fields
Shen, B.; Li, C.; Geng, J.; Zhang, X.; Gawith, J.; et al.
2018. Superconductor science and technology, 31 (7), Art.Nr.: 075005. doi:10.1088/1361-6668/aac294

Properties of ex-situ MgB₂ bulk samples prepared by uniaxial hot pressing and spark plasma sintering
Häßler, W.; Scheiter, J.; Hädrich, P.; Kauffmann-Weiß, S.; Holzapfel, B.; et al.
2018. Physica / C, 551, 48–54. doi:10.1016/j.physc.2018.05.008

Design and Construction of the Cryogenic Cooling System for the Rotating Magnetic Validator of the 10 MW SUPRAPOWER Offshore Superconducting Wind Turbine
Sun, J.; Neumann, H.; Sanz, S.; Sarmiento, G.; Tropeano, M.; et al.
2018. IEEE transactions on applied superconductivity, 28 (3), Art. Nr.: 5201105. doi:10.1109/TASC.2017.2779499

Polymer crystallinity and crystallization kinetics via benchtop 1 H NMR relaxometry: Revisited method, data analysis, and experiments on common polymers
Räntzsch, V.; Haas, M.; Özen, M. B.; Ratzsch, K.-F.; Riazi, K.; et al.
2018. Polymer, 145, 162–173. doi:10.1016/j.polymer.2018.04.066

The EuCARD2 Future Magnets Program for Particle Accelerator High-Field Dipoles: Review of Results and Next Steps
Rossi, L.; Badel, A.; Bajas, H.; Bajko, M.; Ballarino, A.; et al.
2018. IEEE transactions on applied superconductivity, 28 (3), Art. Nr.: 4001810. doi:10.1109/TASC.2017.2784357

Measurement of Magnetic Materials at Room and Cryogenic Temperature for Their Application to Superconducting Wind Generators
Liu, Y.; Noe, M.; Ou, J.; Breining, P.; Veigel, M.; et al.
2018. IEEE transactions on applied superconductivity, 28 (3), Art. Nr.: 8272439. doi:10.1109/TASC.2018.2799163

Gaseous Kr-83m generator for KATRIN
Sentkerestiová, J.; Dragoun, O.; Lebeda, O.; Ryšavý, M.; Sturm, M.; et al.
2018. Journal of Instrumentation, 13 (4), Art. Nr.: P04018. doi:10.1088/1748-0221/13/04/P04018

Experimental and Theoretical Research on Cogging Torque of PM Synchronous Motors Considering Manufacturing Tolerances
Ou, J.; Liu, Y.; Qu, R.; Doppelbauer, M.
2018. IEEE transactions on industrial electronics, 65 (5), 3772–3783. doi:10.1109/TIE.2017.2758760

Overview of the HCPB research activities in EUROfusion
Hernandez, F. A.; Arbeiter, F.; Boccaccini, L. V.; Bubelis, E.; Chakin, V. P.; et al.
2018. IEEE transactions on plasma science, 46 (9), 2247–2261. doi:10.1109/TPS.2018.2830813

Correlation Between Resistances of Face-to-Face Soldered Joints and Interface Resistance Between Layers in Superconducting Tapes
Bagrets, N.; Weiss, K.-P.; Nast, R.; Heller, R.
2018. IEEE transactions on applied superconductivity, 28 (4), Art. Nr.: 8253532. doi:10.1109/TASC.2017.2784961

Investigation of a Concentric Three-Phase HTS Cable Connected to an SFCL Device
Sousa, W. T. B. de; Kottonau, D.; Bock, J.; Noe, M.
2018. IEEE transactions on applied superconductivity, 28 (4), Art. Nr.: 77. doi:10.1109/TASC.2018.2794586

Structure and Properties of MgB2: Effect of Ti-O and TiC Additions
Prikhna, T. A.; Eisterer, M.; Kozyrev, A. V.; Goldacker, W.; Moshchil, V. E.; et al.
2018. IEEE transactions on applied superconductivity, 28 (4), Art. Nr.: 7000105. doi:10.1109/TASC.2018.2794145

Thick Secondary Phase Pinning-Enhanced YBCO Films on Technical Templates
Sieger, M.; Pahlke, P.; Lao, M.; Meledin, A.; Eisterer, M.; et al.
2018. IEEE transactions on applied superconductivity, 28 (4), Art. Nr.: 8000505. doi:10.1109/TASC.2018.2799419

Two Level Undercut-Profile Substrate-Based Filamentary Coated Conductors Produced Using Metal Organic Chemical Vapor Deposition
Insinga, A. R.; Sundaram, A.; Hazelton, D. W.; Zermeno, V. M. R.; Abrahamsen, A. B.; et al.
2018. IEEE transactions on applied superconductivity, 28 (4), Art. Nr.: 6601705. doi:10.1109/TASC.2018.2808365

Three-Dimensional Modeling of the Magnetization of Superconducting Rectangular-Based Bulks and Tape Stacks
Grilli, F.; Kapolka, M.; Zou, S.; Zermeno, V. M. R.; Morandi, A.; et al.
2018. IEEE transactions on applied superconductivity, 28 (4), Art. Nr.: 8201206. doi:10.1109/TASC.2018.2801322

AC Losses of Roebel Cables with Striated 2G REBCO Strands
Yang, Y.; Pelegrin, J.; Young, E. A.; Nast, R.; Kario, A.; et al.
2018. IEEE transactions on applied superconductivity, 28 (4), Art. Nr.: 6602105. doi:10.1109/TASC.2018.2807178

Critical Current Degradation of Coated Conductors Under Soldering Conditions
Preuss, A.; Fietz, W. H.; Immel, F.; Kauffmann-Weiss, S.; Wolf, M. J.
2018. IEEE transactions on applied superconductivity, 28 (4), Art. Nr.: 6601105. doi:10.1109/TASC.2018.2804094

Powering of an HTS dipole insert-magnet operated standalone in helium gas between 5 and 85 K
Nugteren, J. van; Kirby, G.; Bajas, H.; Bajko, M.; Ballarino, A.; et al.
2018. Superconductor science and technology, 31 (6), Art. Nr.: 065002. doi:10.1088/1361-6668/aab887

A Finite-Element Method Framework for Modeling Rotating Machines With Superconducting Windings
Brambilla, R.; Grilli, F.; Martini, L.; Bocchi, M.; Angeli, G.
2018. IEEE transactions on applied superconductivity, 28 (5), Art. Nr.: 5207511. doi:10.1109/TASC.2018.2812884

Experimental Investigation and Modelling of Incidents in Liquid Helium Cryostats. PhD dissertation
Zoller, C.
2018. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000082999

Design of a superconducting DC wind generator. PhD dissertation
Liu, Y.
2018. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000082821

Calibration of high voltages at the ppm level by the difference of Kr conversion electron lines at the KATRIN experiment
Arenz, M.; Baek, W.-J.; Beck, M.; Beglarian, A.; Behrens, J.; et al.
2018. The European physical journal / C, 78 (5), Art.Nr. 368. doi:10.1140/epjc/s10052-018-5832-y

Core Fueling of DEMO by Direct Line Injection of High-Speed Pellets From the HFS
Frattolillo, A.; Baylor, L. R.; Bombarda, F.; Combs, S. K.; Day, C.; et al.
2018. IEEE transactions on plasma science, 46 (5), 1429–1435. doi:10.1109/TPS.2018.2798502

A New Concept for a Higher Burn-Up Fraction Improvement in DEMO Reactor
Igitkhanov, Y.; Day, C.; Varoutis, S.
2018. IEEE transactions on plasma science, 46 (5), 1466–1470. doi:10.1109/TPS.2018.2814785

Test results of a 20 kA high temperature superconductor current lead using REBCO tapes
Heller, R.; Fietz, W. H.; Gröner, F.; Heiduk, M.; Hollik, M.; et al.
2018. Superconductor science and technology, 31 (5), Art.Nr. 055014. doi:10.1088/1361-6668/aab5f9

Relativistic and QED Effects in the Fundamental Vibration of
Trivikram, T. M.; Schlösser, M.; Ubachs, W.; Salumbides, E. J.
2018. Physical review letters, 120 (16), 163002/1–5. doi:10.1103/PhysRevLett.120.163002

Plasma investigations for the KATRIN experiment
KATRIN Collaboration; Kellerer, J.
2018, March. DPG-Frühjahrstagung der Sektion Materie und Kosmos (SMuK 2018), Würzburg, Germany, March 19–23, 2018

Performance of the KATRIN detector system
KATRIN Collaboration; Fränkle, F.
2018. DPG-Frühjahrstagung der Sektion Materie und Kosmos (SMuK 2018), Würzburg, Germany, March 19–23, 2018

Alignment simulations for the KATRIN experiment
KATRIN Collaboration; Deffert, M.
2018. DPG-Frühjahrstagung der Sektion Materie und Kosmos (SMuK 2018), Würzburg, Germany, March 19–23, 2018

Azimuthal investigation of spectrometer background in the KATRIN experiment
KATRIN Collaboration; Block, F.
2018. DPG-Frühjahrstagung der Sektion Materie und Kosmos (SMuK 2018), Würzburg, Germany, March 19–23, 2018

Investigation of ion-induced background processes in the KATRIN spectrometers
KATRIN Collaboration; Baek, W.-J.
2018. DPG-Frühjahrstagung der Sektion Materie und Kosmos (SMuK 2018), Würzburg, Germany, March 19–23, 2018

Ion monitoring in the KATRIN experiment
KATRIN Collaboration; Klein, M.
2018. DPG-Frühjahrstagung der Sektion Materie und Kosmos (SMuK 2018), Würzburg, Germany, March 19–23, 2018

Wide-range non-contact fluorescence intensity ratio thermometer based on Yb³⁺/Nd³⁺ co-doped La₂O₃ microcrystals operating from 290 to 1230 K
Gao, G.; Busko, D.; Kauffmann-Weiss, S.; Turshatov, A.; Howard, I. A.; et al.
2018. Journal of materials chemistry / C, 6 (15), 4163–4170. doi:10.1039/C8TC00782A

High-resolution spectroscopy of tritiated water and analysis of the 2v₁ mode of HTO
Müller, J.; Schlösser, M.; Hase, F.; Ziegler, N.; Grössle, R.; et al.
2018. 82. Jahrestagung der DPG und DPG-Frühjahrstagung der Sektion Atome, Moleküle, Quantenoptik und Plasmen, Fachverband Quantenoptik und Photonik (SAMOP 2018), Erlangen, Germany, March 4–9, 2018

High resolution CARS spectroscopy of the T₂ molecule
Schlösser, M.; Zhao, X.; Trivikram, M.; Ubachs, W.; Salumbides, E. J.
2018. 82. Jahrestagung der DPG und DPG-Frühjahrstagung der Sektion Atome, Moleküle, Quantenoptik und Plasmen, Fachverband Quantenoptik und Photonik (SAMOP 2018), Erlangen, Germany, March 4–9, 2018

Loops - the tritium processing system of the KATRIN exeriment
Marsteller, A.
2018. DPG-Frühjahrstagung der Sektion Kondensierte Materie gemeinsam mit der EPS (2018), Berlin, Germany, March 11–16, 2018

An MgB₂ HVDC superconducting cable for power transmission with a reduced carbon footprint
Marian, A.; Ballarino, A.; Catalan, C.; Dittmar, N.; Escamez, G.; et al.
2018. Eco-Design in Electrical Engineering : Eco-friendly Methodologies, Solutions and Example for Application to Electrical Engineering. Ed.: J.L. Bessède, 129–135, Springer International Publishing

A smart architecture for the fuel cycle of a fusion power plant
Day, C.; Butler, B.; Giegerich, T.; Ploeckl, B.
2018. 30th International Symposium on Fusion Technology (SOFT 2018), Giardini-Naxos, Italy, September 16–21, 2018

Addressing the feasibility of inboard direct-line injection of high-speed pellets, for core fueling of DEMO
Frattolillo, A.; Baylor, L. R.; Bombarda, F.; Cismondi, F.; Combs, S. K.; et al.
2018. 30th International Symposium on Fusion Technology (SOFT 2018), Giardini-Naxos, Italy, September 16–21, 2018

The DEMO fuel cycle - novel technologies for tritium inventory reduction
Day, C.; Federici, G.; Butler, B.; Giegerich, T.; Hörstenmeyer, Y.; et al.
2018. 27th IAEA Fusion Energy Conference (FEC 2018), Gāndhināgar, India, October 22–27, 2018

Assessment of the 3D geometrical effects on the DEMO divertor pumping efficiency
Varoutis, S.; Igitkhanov, Y.; Day, C.
2018. 23rd International Conference on Plasma Surface Interactions in Controlled Fusion Devices (PSI 2018), Princeton, NJ, USA, June 18–22, 2018

Materialstudien zur Unterdrückung des Tritiummemoryeffekts in BIXS Analytiksystemen
Aker, M.
2018. DPG-Frühjahrstagung der Sektion Kondensierte Materie gemeinsam mit der EPS (2018), Berlin, Germany, March 11–16, 2018

Experimental Study on Superconducting Level Sensors in Liquid Helium
Kunniyoor, K. R.; Richter, T.; Ghosh, P.; Lietzow, R.; Schlachter, S.; et al.
2018. IEEE transactions on applied superconductivity, 28 (2), 9000810/1–10. doi:10.1109/TASC.2018.2799144

Technical design and commissioning of the KATRIN large-volume air coil system
Erhard, M.; Behrens, J.; Bauer, S.; Beglarian, A.; Berendes, R.; et al.
2018. Journal of Instrumentation, 13 (02), P02003. doi:10.1088/1748-0221/13/02/P02003

Estimation of Losses in the (RE)BCO Two-Coil Insert of the NHMFL 32 T All-Superconducting Magnet
Berrospe-Juarez, E.; Zermeño, V. M. R.; Trillaud, F.; Gavrilin, A. V.; Grilli, F.; et al.
2018. IEEE transactions on applied superconductivity, 28 (3), Art.Nr. 8252744. doi:10.1109/TASC.2018.2791545

Entwicklung eines druckgetriebenen dynamischen Kolonnenmodells zur Erhöhung der Flexibilität von kryogenen Luftzerlegungsanlagen. PhD dissertation
Wunderlich, B.
2018. KIT Scientific Publishing. doi:10.5445/KSP/1000080378

Thin film deposition and high-field transport properties of Fe-based superconductors
Hänisch, J.
2018. Institute of Electrical Engineering, Chinese Academy of Science (2018), Beijing, China, January 24, 2018

Supraleitende Höchstfeldmagnete
Schneider, T.; Kläser, M.
2018. VDI Wissensforum Kryotechnik (2018), Karlsruhe, Germany, March 7–9, 2018

Pinning enhancement of NdFeAs(O,F) thin film by geometrical effect
Iida, K.; Kauffmann-Weiss, S.; Omura, T.; Matsumoto, T.; Tarantini, C.; et al.
2018. 65th JSAP Spring Meeting (2018), Tokyo, Japan, March 17–20, 2018

Misorientation angle dependence of inter-grain transport properties for oxypnictide superconductor
Iida, K.; Omura, T.; Matsumoto, T.; Hatano, T.; Ikuta, H.; et al.
2018. 6th International Conference on Superconductivity and Magnetism (ICSM 2018), Antalya, Turkey, April 29–May 4, 2018

High-field electrical transport in Fe-based superconducting films - from basics to possible applications
Hänisch, J.; Holzapfel, B.; Iida, K.; Tarentini, C.
2018. 6th International Conference on Superconductivity and Magnetism (ICSM 2018), Antalya, Turkey, April 29–May 4, 2018

High-speed fluorescent thermal imaging of quench propagation in high temperature superconductor tapes
Gyuráki, R.; Sirois, F.; Grilli, F.
2018. Superconductor science and technology, 31 (3), 034003. doi:10.1088/1361-6668/aaa703

3S : Superconducting DC-Busbar for High Current Applications
Elschner, S.; Brand, J.; Goldacker, W.; Hollik, M.; Kudymow, A.; et al.
2018. IEEE transactions on applied superconductivity, 28 (4), Art.Nr. 4800805. doi:10.1109/TASC.2018.2797521

Modeling of Two-Phase Heat Exchangers With Zeotropic Fluid Mixtures
Gomse, D.; Kochenburger, T. M.; Grohmann, S.
2018. Journal of heat transfer, 140 (5), 051801/1–8. doi:10.1115/1.4038852

Observation of zero resistance in as-electrodeposited FeSe
Yamashita, A.; Matsumoto, R.; Tanaka, M.; Hara, H.; Iida, K.; et al.
2018. Solid state communications, 270, 72–75. doi:10.1016/j.ssc.2017.11.018

Liquid scintillation. Mesuring procedures, new developments
Möbius, S.; Erat, S.; Möbius, R.; Möbius, T.; Santiago, L.; et al.
2018. Karlsruher Institut für Technologie (KIT)

Vortex glass-liquid transition and activated flux motion in NdFeAs(O,F) thin films
Hänisch, J.; Iida, K.; Langer, M.; Kauffmann-Weiss, S.; Oomura, T.; et al.
2018. Materials Research Society Spring Meeting and Exhibition (2018), Phoenix, AZ, USA, April 2–4, 2018

Progress towards YBa₂Cu₃O7-δ nanocomposite thin films using low-fluorine chemical solution deposition and preformed nanocrystals
Rijckaert, H.; Hänisch, J.; Sieger, M.; Hühne, R.; De Roo, J.; et al.
2018. Materials Research Society Spring Meeting and Exhibition (2018), Phoenix, AZ, USA, April 2–4, 2018

A Mathematical Model for the Characterization of Superconducting Level Sensors
Kunniyoor, K. R.; Richter, T.; Ghosh, P.; Lietzow, R.; Neumann, H.
2018. IEEE transactions on applied superconductivity, 28 (1), 9000111/1–11. doi:10.1109/TASC.2017.2773827

Towards a 20 kA high temperature superconductor current lead module using REBCO tapes
Heller, R.; Bagrets, N.; Fietz, W. H.; Gröner, F.; Kienzler, A.; et al.
2018. Superconductor science and technology, 31 (1), 015021. doi:10.1088/1361-6668/aa9b09

A strategy for protection of high voltage systems using resistive superconducting fault current limiters
Schettino, H. J.; Andrade Jr, R. D.; Polasek, A.; Kottonau, D.; Sousa, W. T. B.
2018. Physica / C, 544, 40–45. doi:10.1016/j.physc.2017.11.004

Outgassing behavior of different high-temperature resistant polymers
Battes, K.; Day, C.; Hauer, V.
2018. Journal of vacuum science & technology / A, 36 (2), 021602. doi:10.1116/1.5001243

Overview of JT-60SA HTS Current Lead Manufacture and Testing
Heller, R.; Fietz, W. H.; Heiduk, M.; Hollik, M.; Kienzler, A.; et al.
2018. IEEE transactions on applied superconductivity, 28 (3), 4800105/1–5. doi:10.1109/TASC.2017.2768166

Application of resistive superconducting fault current limiters in offshore oil production platforms
Mafra, G. R. F. Q.; Sotelo, G. G.; Fortes, M. Z.; Sousa, W. T. B. de
2017. Electric Power Systems Research, 144, 107–114. doi:10.1016/j.epsr.2016.11.006

Deformation Mechanisms in FCC and BCC High Entropy Alloys
Heilmaier, M.; Kauffmann, A.; Chen, H.; Schwaiger, R.; Choi, I.-C.; et al.
2017. Recent Progress in High Entropy and Compositionally Complex Alloys (2017), Bochum, Germany, January 12–13, 2017

Untangling surface oxygen exchange effects in YBa₂Cu₃O₆₊ₓ thin films by electrical conductivity relaxation
Cayado, P.; Sánchez-Valdés, C. F.; Stangl, A.; Coll, M.; Roura, P.; et al.
2017. Physical chemistry, chemical physics, 19 (21), 14129–14140. doi:10.1039/C7CP01855J

Epitaxial superconducting GdBa2Cu3O7−δ /Gd2O3 nanocomposite thin films from advanced low-fluorine solutions
Cayado, P.; Mundet, B.; Eloussifi, H.; Vallés, F.; Coll, M.; et al.
2017. Superconductor science and technology, 30 (12), 125010. doi:10.1088/1361-6668/aa8ffe

Prototype modular cryostat utilized for 10 MW offshore superconducting wind turbine
Sun, J.; Sanz, S.; Ramalingam, R.; Neumann, H.
2017. Proceedings of the 14th Cryogenics 2017 Conference, Dresden, Germany, 15th - 19th May 2017, 120–125, International Institute of Refrigeration. doi:10.18462/iir.cryo.2017.0019

Estimation of losses in the (RE)BCO two-coil insert of the NHMFL 32 T all-superconducting magnet
Berrospe-Juarez, E.; Zermeno, V. M. R.; Trillaud, F.; Gavrilin, A. V.; Grilli, F.; et al.
2017. 25th International Conference on Magnet Technology (2017), Amsterdam, Netherlands, August 27–September 1, 2017

Ermittlung kryogener elektromechanischer Kenngrößen von Hochtemperatur-Supraleitern für Fusionsmagnete. master’s thesis
Ebner, C.
2017

Status of energy Lab 2.0 and overview of power-hardware-in-the-loop activities
Geisbüsch, J.; Batista de Sousa, W.; Kaiser, F.; Karrari, S.
2017. RT17: OPAL-RT’s 9th International Conference on Real-Time Simulation (2017), Montreal, Canada, September 5–8, 2017

Status of energy Lab 2.0 and overview of power-hardware-in-the-loop (PHIL) activities
Geisbüsch, J.; Batista de Sousa, W.; Kaiser, F.; Karrari, S.
2017. 3.Wissenschaftliches SCI Treffen, Karlsruhe, 11.-12.September 2017

Die Gefährdungsbeurteilung in hochspezialisierten Arbeitssystemen
Bauer, K.
2017. 35. Internationaler Kongress für Arbeitsschutz und Arbeitsmedizin, Düsseldorf, 17.-20.Oktober 2017

Die Gefährdungsbeurteilung - Potentiale entdecken. ’Hochspezialisierte Aarbeitssysteme’
Bauer, K.; Zimmermann, S.
2017. 35. Internationaler Kongress für Arbeitsschutz und Arbeitsmedizin, Düsseldorf, 17.-20.Oktober 2017

Evolution of microstructure and mechanical properties of copper processed by equal channel angular pressing at low temperatures
Sas, J.; Weiss, K. P.; Kauffmann-Weiss, S.; Kauffmann, A.; Umezawa, O.; et al.
2017. International Conference on the Physical Properties and Application of Advanced Materials (ICPMAT 2017), Košice, Slovakia, August 6–9, 2017

3D modeling of the magnetization of superconducting rectangular-based bulks and tape stacks
Kapolka, M.; Zermeno, V. M. R.; Zou, S.; Morandi, A.; Ribani, P. L.; et al.
2017. 13th European Conference on Applied Superconductivity (2017), Geneva, Switzerland, September 17–21, 2017

Structure and superconducting characteristics of magnesium diboride, substitution of boron atoms by oxygen and carbon
Prikhna, T.; Romaka, V.; Eisterer, M.; Shapovalov, A.; Kozyrev, A.; et al.
2017. IOP conference series / Materials science and engineering, 279, Art.Nr. 012023. doi:10.1088/1757-899X/279/1/012023

Temperature dependence on tensile properties of Cu-40mass%Fe dual phase alloy
Koga, N.; Zhang, W.; Umezawa, O.; Tschan, V.; Sas, J.; et al.
2017. IOP conference series / Materials science and engineering, 279, Art.Nr. 012004. doi:10.1088/1757-899X/279/1/012004

The scope of additive manufacturing in cryogenics, component design, and applications
Stautner, W.; Vanapalli, S.; Weiss, K.-P.; Chen, R.; Amm, K.; et al.
2017. IOP conference series / Materials science and engineering, 278, Art.Nr. 012134. doi:10.1088/1757-899X/278/1/012134

Theoretical analysis and coating thickness determination of a dual layer metal coated FBG sensor for sensitivity enhancement at cryogenic temperatures
Ramalingam, R.; Atrey, M. D.
2017. IOP conference series / Materials science and engineering, 278, Art.Nr. 012075. doi:10.1088/1757-899X/278/1/012075

A High Resolution Survey of the Galactic Plane at 408 MHz
Tung, A. K.; Kothes, R.; Landecker, T. L.; Geisbüsch, J.; Rizzo, D. D.; et al.
2017. The astronomical journal, 154 (4), Art.Nr. 156. doi:10.3847/1538-3881/aa866d

Experimental investigation on charcoal adsorption for cryogenic pump application
Scannapiego, M.; Day, C.
2017. IOP conference series / Materials science and engineering, 278, 012160. doi:10.1088/1757-899X/278/1/012160

Safety studies on vacuum insulated liquid helium cryostats
Weber, C.; Henriques, A.; Zoller, C.; Grohmann, S.
2017. IOP Conference Series: Materials Science and Engineering, 278, 012169. doi:10.1088/1757-899X/278/1/012169

Experimental validation of a self-calibrating cryogenic mass flowmeter
Janzen, A.; Boersch, M.; Burger, B.; Drache, J.; Ebersoldt, A.; et al.
2017. IOP conference series / Materials science and engineering, 278 (1), Article no: 012077. doi:10.1088/1757-899X/278/1/012077

Micro-structured heat exchanger for cryogenic mixed refrigerant cycles
Gomse, D.; Reiner, A.; Rabsch, G.; Gietzelt, T.; Brandner, J. J.; et al.
2017. IOP Conference Series: Materials Science and Engineering, 278, Art.Nr. 012061. doi:10.1088/1757-899X/278/1/012061

Overview of the JET results in support to ITER
JET Contributors; Litaudon, X.; Abduallev, S.; Abhangi, M.; Abreu, P.; et al.
2017. Nuclear fusion, 57 (10), Art. Nr.: 102001. doi:10.1088/1741-4326/aa5e28

Dimensional crossover in Fe-based superconductors
Iida, K.; Hänisch, J.; Naito, M.
2017. Journal of Cryogenics and Superconductivity Society of Japan, 52 (6), 443–447. doi:10.2221/jcsj.52.443

High power high temperature superconductor current leads at KIT
Heller, R.; Fietz, W. H.; Kienzler, A.
2017. Fusion engineering and design, 125, 294–298. doi:10.1016/j.fusengdes.2017.04.047

Recent progress of the JT-60SA project
Shirai, H.; Barabaschi, P.; Kamada, Y.
2017. (JT-60SA Team, Ed.) Nuclear fusion, 57 (10), Art. Nr.: 102002. doi:10.1088/1741-4326/aa5d01

Ductilisation of ECAP copper at cryogenic temperature
Kauffmann-Weiss, S.; Kauffmann, A.; Sas, J.; Kvacka, T.; Freudenberger, J.; et al.
2017. 7th International Conference on Nanomaterials by Severe Plastic Deformation (NanoSPD7), Sydney, AUS, July 2-7, 2017

High current densities in round HTS crossconductors of more than 500 A/mm² at 4.2 K, 12 T
Wolf, M. J.; Bagrets, N.; Fietz, W. H.; Gröner, F.; Lange, C.
2017. 13th European Conference on Applied Superconductivity (2017), Geneva, Switzerland, September 17–21, 2017

Soldered contacts for HTS coated conductors
Ackermann, K.; Kauffmann-Weiss, S.; Hänisch, J.; Bäcker, M.; Holzapfel, B.
2017. 13th European Conference on Applied Superconductivity (2017), Geneva, Switzerland, September 17–21, 2017

A novel concept of high temperature superconducting undulator
Holubek, T.; Casalbuoni, S.; Gerstl, S.; Glamann, N.; Grau, A.; et al.
2017. Superconductor science and technology, 30 (11), Art.Nr.: 115002. doi:10.1088/1361-6668/aa87f1

Finely-tuned NIR-to-visible up-conversion in La2O3:Yb3+,Er3+ microcrystals with high quantum yield
Gao, G.; Busko, D.; Kauffmann-Weiss, S.; Turshatov, A.; Howard, I. A.; et al.
2017. Journal of materials chemistry / C, 5 (42), 11010–11017. doi:10.1039/C6TC05322J

A substantial step forward in the realization of the ITER HNB system: The ITER NBI Test Facility
Toigo, V.; Piovan, R.; Dal Bello, S.; Gaio, E.; Luchetta, A.; et al.
2017. Fusion engineering and design, 123, 32–39. doi:10.1016/j.fusengdes.2016.11.007

Optimizing a capillary Raman system for in situ gas measurements by reducing the fluorescence
Off, A.; Rupp, S.; Seitz-Moskaliuk, H.; Telle, H. H.
2017. 9th International Conference on Advanced Vibrational Spectroscopy (ICAVS-9), Victoria, CDN, June 11-16, 2017

Superconducting Supercomputers and Quantum Computation
Hilgenkamp, H.
2017. European Cryogenic Days 2017, Karlsruhe, Germany, 13th - 15th September 2017

A Novel PM-Free High-Speed Linear Machine with Amorphous Primary Core
Ou, J.; Liu, Y.; Schiefer, M.; Doppelbauer, M.
2017. IEEE transactions on magnetics, 53 (11), Art.Nr.: 7919185. doi:10.1109/TMAG.2017.2701152

Forced flow cooling of HTS CORC cable used in superconducting coil
Vojenčiak, M.; Šouc, J.; Gömöry, F.
2017. 2nd International Workshop on Cooling Systems for HTS Applications (IWC-HTS), Karlsruhe, Germany, 13th - 15th September 2017

Flow Regulation of Cryogenic Fluids : Design of a High-Rangeability Control Valve
Consogno, G.; Boersch, M.; Drache, J.; Erni, P.; Weber, D.
2017. 2nd International Workshop on Cooling Systems for HTS Applications (IWC-HTS), Karlsruhe, Germany, 13th - 15th September 2017

Tritium Behavior in HCPB Breeder Blanket Unit: Modeling and Experiments
Carella, E.; Moreno, C.; Urgorri, F. R.; Demange, D.; Castellanos, J.; et al.
2017. Fusion science and technology, 71, 357–362. doi:10.1080/15361055.2017.1289584

Comparison of MFI-ZSM5 and NaA zeolite-type tubular membranes for the separation of water vapour from helium for tritium processes in future fusion reactors
Borisevich, O.; Antunes, R.; Demange, D.
2017. Fusion engineering and design, 125, 134–138. doi:10.1016/j.fusengdes.2017.10.006

The PRIMA Test Facility: SPIDER and MITICA test-beds for ITER neutral beam injectors
Toigo, V.; Piovan, R.; Bello, S. D.; Gaio, E.; Luchetta, A.; et al.
2017. New journal of physics, 19 (8), 085004. doi:10.1088/1367-2630/aa78e8

Progress in EU-DEMO in-vessel components integration
Cismondi, F.; Agostinetti, P.; Aiello, G.; Aubert, J.; Bachmann, C.; et al.
2017. Fusion engineering and design, 124, 562–566. doi:10.1016/j.fusengdes.2017.03.147

Assessment of Pumping Requirements in DEMO Reactor
Yu. Igitkhanov; Day, C.; Lang, P.; Plöckl, B.
2017. Fusion science and technology, 72 (4), 780–784. doi:10.1080/15361055.2017.1347465

Mercury ring pump proof-of-principle testing in the THESEUS facility
Giegerich, T.; Day, C.; Jäger, M.
2017. Fusion engineering and design, 124, 809–813. doi:10.1016/j.fusengdes.2017.03.119

SupernetNL program: 3.4 km 110 kV AC underground superconducting cable in the Dutch grid
Dhallé, M. M. J.; ten Kate, H. H. J.; Hunik, R.; Mousavi-Gargari, S.; Smit, J.; et al.
2017. (H. J. M. ter Brake, Ed.), II. International Workshop on Cooling Systems for HTS Applications, Karlsruhe, Germany, September, 13-15, 2017

Cryogenic challenges for different superconductive motor topologies
Reis, T.; Waele, A. T. A. M. de; Oswald, J.; Oswald, B.; Berberich, E.
2017. II. International Workshop on Cooling Systems for HTS Applications, Karlsruhe, Germany, September, 13-15, 2017

Source stability of the KATRIN experiment
Marsteller, A.
2017. Schule für Astroteilchenphysik, Obertrubach-Bärnfels, 4.-12.Oktober 2017

Additive manufacturing of ABS thermoplastic for cryogenic application
Weiss, K.-P.; Bagrets, N.; Sas, J.; Lange, C.
2017. International Conference on the Physical Properties and Application of Advanced Materials (ICPMAT 2017), Košice, Slovakia, August 6–9, 2017

High-field transport properties of Fe-based superconducting thin films
Hänisch, J.; Iida, K.; Kurth, F.; Richter, S.; Hühne, R.; et al.
2017. 2nd Workshop Itinerant Magnetism and Superconductivity (IMS 2017), Dresden, September 28-29, 2017

Assessment of the performance of a 20 kA REBCO current lead
Zappatore, A.; Heller, R.; Savoldi, L.; Zanino, R.
2017. CHATS on Applied Superconductivity, Tohoku University, Sendai, J, December 10-12, 2017

Thermal-hydraulic analysis of the HTS DEMO TF coil
Lewandowska, M.; Dembkowska, A.; Heller, R.; Wolf, M.
2017. CHATS on Applied Superconductivity, Tohoku University, Sendai, J, December 10-12, 2017